From: Krzysztof Kozlowski <krzk@kernel.org> To: "Rob Herring" <robh+dt@kernel.org>, "Mark Rutland" <mark.rutland@arm.com>, "Kukjin Kim" <kgene@kernel.org>, "Krzysztof Kozlowski" <krzk@kernel.org>, "Jonathan Cameron" <jic23@kernel.org>, "Hartmut Knaack" <knaack.h@gmx.de>, "Lars-Peter Clausen" <lars@metafoo.de>, "Peter Meerwald-Stadler" <pmeerw@pmeerw.net>, "Sebastian Reichel" <sre@kernel.org>, "Alessandro Zummo" <a.zummo@towertech.it>, "Alexandre Belloni" <alexandre.belloni@bootlin.com>, "Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, linux-pm@vger.kernel.org, linux-rtc@vger.kernel.org Subject: [PATCH v2 10/11] dt-bindings: iio: adc: exynos: Convert Exynos ADC bindings to json-schema Date: Sat, 7 Sep 2019 11:20:06 +0200 [thread overview] Message-ID: <20190907092007.9946-10-krzk@kernel.org> (raw) In-Reply-To: <20190907092007.9946-1-krzk@kernel.org> Convert Samsung Exynos Analog to Digital Converter bindings to DT schema format using json-schema. This is a direct conversion of existing bindings so it also copies the existing error in the bindings regarding the requirement of two register address ranges for certain compatibles. The inconsistency in binding was caused by commit fafb37cfae6d ("iio: exyno-adc: use syscon for PMU register access"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Changes since v1: 1. Rework reg, clocks and clock-names matching for specific compatibles, 2. Make samsung,syscon-phandle required only on certain compatibles, 3. Fix indentation. --- .../bindings/iio/adc/samsung,exynos-adc.txt | 107 ------------ .../bindings/iio/adc/samsung,exynos-adc.yaml | 163 ++++++++++++++++++ 2 files changed, 163 insertions(+), 107 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt deleted file mode 100644 index e1fe02f3e3e9..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt +++ /dev/null @@ -1,107 +0,0 @@ -Samsung Exynos Analog to Digital Converter bindings - -The devicetree bindings are for the new ADC driver written for -Exynos4 and upward SoCs from Samsung. - -New driver handles the following -1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 - and future SoCs from Samsung -2. Add ADC driver under iio/adc framework -3. Also adds the Documentation for device tree bindings - -Required properties: -- compatible: Must be "samsung,exynos-adc-v1" - for Exynos5250 controllers. - Must be "samsung,exynos-adc-v2" for - future controllers. - Must be "samsung,exynos3250-adc" for - controllers compatible with ADC of Exynos3250. - Must be "samsung,exynos4212-adc" for - controllers compatible with ADC of Exynos4212 and Exynos4412. - Must be "samsung,exynos7-adc" for - the ADC in Exynos7 and compatibles - Must be "samsung,s3c2410-adc" for - the ADC in s3c2410 and compatibles - Must be "samsung,s3c2416-adc" for - the ADC in s3c2416 and compatibles - Must be "samsung,s3c2440-adc" for - the ADC in s3c2440 and compatibles - Must be "samsung,s3c2443-adc" for - the ADC in s3c2443 and compatibles - Must be "samsung,s3c6410-adc" for - the ADC in s3c6410 and compatibles - Must be "samsung,s5pv210-adc" for - the ADC in s5pv210 and compatibles -- reg: List of ADC register address range - - The base address and range of ADC register - - The base address and range of ADC_PHY register (every - SoC except for s3c24xx/s3c64xx ADC) -- interrupts: Contains the interrupt information for the timer. The - format is being dependent on which interrupt controller - the Samsung device uses. -- #io-channel-cells = <1>; As ADC has multiple outputs -- clocks From common clock bindings: handles to clocks specified - in "clock-names" property, in the same order. -- clock-names From common clock bindings: list of clock input names - used by ADC block: - - "adc" : ADC bus clock - - "sclk" : ADC special clock (only for Exynos3250 and - compatible ADC block) -- vdd-supply VDD input supply. - -- samsung,syscon-phandle Contains the PMU system controller node - (To access the ADC_PHY register on Exynos5250/5420/5800/3250) -Optional properties: -- has-touchscreen: If present, indicates that a touchscreen is - connected an usable. - -Note: child nodes can be added for auto probing from device tree. - -Example: adding device info in dtsi file - -adc: adc@12d10000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&clock 303>; - clock-names = "adc"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; -}; - -Example: adding device info in dtsi file for Exynos3250 with additional sclk - -adc: adc@126c0000 { - compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; - reg = <0x126C0000 0x100>; - interrupts = <0 137 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; - clock-names = "adc", "sclk"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; -}; - -Example: Adding child nodes in dts file - -adc@12d10000 { - - /* NTC thermistor is a hwmon device */ - ncp15wb473@0 { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <47000>; - pulldown-ohm = <0>; - io-channels = <&adc 4>; - }; -}; - -Note: Does not apply to ADC driver under arch/arm/plat-samsung/ -Note: The child node can be added under the adc node or separately. diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml new file mode 100644 index 000000000000..dd58121f25b1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/samsung,exynos-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Analog to Digital Converter (ADC) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,exynos-adc-v1 # Exynos5250 + - samsung,exynos-adc-v2 + - samsung,exynos3250-adc + - samsung,exynos4212-adc # Exynos4212 and Exynos4412 + - samsung,exynos7-adc + - samsung,s3c2410-adc + - samsung,s3c2416-adc + - samsung,s3c2440-adc + - samsung,s3c2443-adc + - samsung,s3c6410-adc + - samsung,s5pv210-adc + + reg: + minItems: 1 + maxItems: 2 + + clocks: + description: + Phandle to ADC bus clock. For Exynos3250 additional clock is needed. + minItems: 1 + maxItems: 2 + + clock-names: + description: + Must contain clock names (adc, sclk) matching phandles in clocks + property. + minItems: 1 + maxItems: 2 + + interrupts: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + vdd-supply: + description: VDD input supply + maxItems: 1 + + samsung,syscon-phandle: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: + Phandle to the PMU system controller node (to access the ADC_PHY + register on Exynos5250/5420/5800/3250). + + has-touchscreen: + description: + If present, indicates that a touchscreen is connected and usable. + type: boolean + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - "#io-channel-cells" + - vdd-supply + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos-adc-v1 + - samsung,exynos-adc-v2 + - samsung,exynos3250-adc + - samsung,exynos4212-adc + - samsung,s5pv210-adc + then: + properties: + reg: + items: + # For S5P and Exynos + - description: base registers + - description: phy registers + required: + - samsung,syscon-phandle + else: + properties: + reg: + items: + - description: base registers + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-adc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: adc + - const: sclk + else: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: adc + +examples: + - | + adc: adc@12d10000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x12d10000 0x100>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + + /* NTC thermistor is a hwmon device */ + ncp15wb473@0 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; + }; + + - | + adc@126c0000 { + compatible = "samsung,exynos3250-adc"; + reg = <0x126C0000 0x100>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu 0>, // CLK_TSADC + <&cmu 1>; // CLK_SCLK_TSADC + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org> To: "Rob Herring" <robh+dt@kernel.org>, "Mark Rutland" <mark.rutland@arm.com>, "Kukjin Kim" <kgene@kernel.org>, "Krzysztof Kozlowski" <krzk@kernel.org>, "Jonathan Cameron" <jic23@kernel.org>, "Hartmut Knaack" <knaack.h@gmx.de>, "Lars-Peter Clausen" <lars@metafoo.de>, "Peter Meerwald-Stadler" <pmeerw@pmeerw.net>, "Sebastian Reichel" <sre@kernel.org>, "Alessandro Zummo" <a.zummo@towertech.it>, "Alexandre Belloni" <alexandre.belloni@bootlin.com>, "Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, linux-pm@vger.kernel.org, linux-rtc@vger.kernel.org Subject: [PATCH v2 10/11] dt-bindings: iio: adc: exynos: Convert Exynos ADC bindings to json-schema Date: Sat, 7 Sep 2019 11:20:06 +0200 [thread overview] Message-ID: <20190907092007.9946-10-krzk@kernel.org> (raw) In-Reply-To: <20190907092007.9946-1-krzk@kernel.org> Convert Samsung Exynos Analog to Digital Converter bindings to DT schema format using json-schema. This is a direct conversion of existing bindings so it also copies the existing error in the bindings regarding the requirement of two register address ranges for certain compatibles. The inconsistency in binding was caused by commit fafb37cfae6d ("iio: exyno-adc: use syscon for PMU register access"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Changes since v1: 1. Rework reg, clocks and clock-names matching for specific compatibles, 2. Make samsung,syscon-phandle required only on certain compatibles, 3. Fix indentation. --- .../bindings/iio/adc/samsung,exynos-adc.txt | 107 ------------ .../bindings/iio/adc/samsung,exynos-adc.yaml | 163 ++++++++++++++++++ 2 files changed, 163 insertions(+), 107 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt deleted file mode 100644 index e1fe02f3e3e9..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt +++ /dev/null @@ -1,107 +0,0 @@ -Samsung Exynos Analog to Digital Converter bindings - -The devicetree bindings are for the new ADC driver written for -Exynos4 and upward SoCs from Samsung. - -New driver handles the following -1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 - and future SoCs from Samsung -2. Add ADC driver under iio/adc framework -3. Also adds the Documentation for device tree bindings - -Required properties: -- compatible: Must be "samsung,exynos-adc-v1" - for Exynos5250 controllers. - Must be "samsung,exynos-adc-v2" for - future controllers. - Must be "samsung,exynos3250-adc" for - controllers compatible with ADC of Exynos3250. - Must be "samsung,exynos4212-adc" for - controllers compatible with ADC of Exynos4212 and Exynos4412. - Must be "samsung,exynos7-adc" for - the ADC in Exynos7 and compatibles - Must be "samsung,s3c2410-adc" for - the ADC in s3c2410 and compatibles - Must be "samsung,s3c2416-adc" for - the ADC in s3c2416 and compatibles - Must be "samsung,s3c2440-adc" for - the ADC in s3c2440 and compatibles - Must be "samsung,s3c2443-adc" for - the ADC in s3c2443 and compatibles - Must be "samsung,s3c6410-adc" for - the ADC in s3c6410 and compatibles - Must be "samsung,s5pv210-adc" for - the ADC in s5pv210 and compatibles -- reg: List of ADC register address range - - The base address and range of ADC register - - The base address and range of ADC_PHY register (every - SoC except for s3c24xx/s3c64xx ADC) -- interrupts: Contains the interrupt information for the timer. The - format is being dependent on which interrupt controller - the Samsung device uses. -- #io-channel-cells = <1>; As ADC has multiple outputs -- clocks From common clock bindings: handles to clocks specified - in "clock-names" property, in the same order. -- clock-names From common clock bindings: list of clock input names - used by ADC block: - - "adc" : ADC bus clock - - "sclk" : ADC special clock (only for Exynos3250 and - compatible ADC block) -- vdd-supply VDD input supply. - -- samsung,syscon-phandle Contains the PMU system controller node - (To access the ADC_PHY register on Exynos5250/5420/5800/3250) -Optional properties: -- has-touchscreen: If present, indicates that a touchscreen is - connected an usable. - -Note: child nodes can be added for auto probing from device tree. - -Example: adding device info in dtsi file - -adc: adc@12d10000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&clock 303>; - clock-names = "adc"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; -}; - -Example: adding device info in dtsi file for Exynos3250 with additional sclk - -adc: adc@126c0000 { - compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; - reg = <0x126C0000 0x100>; - interrupts = <0 137 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; - clock-names = "adc", "sclk"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; -}; - -Example: Adding child nodes in dts file - -adc@12d10000 { - - /* NTC thermistor is a hwmon device */ - ncp15wb473@0 { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <47000>; - pulldown-ohm = <0>; - io-channels = <&adc 4>; - }; -}; - -Note: Does not apply to ADC driver under arch/arm/plat-samsung/ -Note: The child node can be added under the adc node or separately. diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml new file mode 100644 index 000000000000..dd58121f25b1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/samsung,exynos-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Analog to Digital Converter (ADC) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,exynos-adc-v1 # Exynos5250 + - samsung,exynos-adc-v2 + - samsung,exynos3250-adc + - samsung,exynos4212-adc # Exynos4212 and Exynos4412 + - samsung,exynos7-adc + - samsung,s3c2410-adc + - samsung,s3c2416-adc + - samsung,s3c2440-adc + - samsung,s3c2443-adc + - samsung,s3c6410-adc + - samsung,s5pv210-adc + + reg: + minItems: 1 + maxItems: 2 + + clocks: + description: + Phandle to ADC bus clock. For Exynos3250 additional clock is needed. + minItems: 1 + maxItems: 2 + + clock-names: + description: + Must contain clock names (adc, sclk) matching phandles in clocks + property. + minItems: 1 + maxItems: 2 + + interrupts: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + vdd-supply: + description: VDD input supply + maxItems: 1 + + samsung,syscon-phandle: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: + Phandle to the PMU system controller node (to access the ADC_PHY + register on Exynos5250/5420/5800/3250). + + has-touchscreen: + description: + If present, indicates that a touchscreen is connected and usable. + type: boolean + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - "#io-channel-cells" + - vdd-supply + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos-adc-v1 + - samsung,exynos-adc-v2 + - samsung,exynos3250-adc + - samsung,exynos4212-adc + - samsung,s5pv210-adc + then: + properties: + reg: + items: + # For S5P and Exynos + - description: base registers + - description: phy registers + required: + - samsung,syscon-phandle + else: + properties: + reg: + items: + - description: base registers + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-adc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: adc + - const: sclk + else: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: adc + +examples: + - | + adc: adc@12d10000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x12d10000 0x100>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + + /* NTC thermistor is a hwmon device */ + ncp15wb473@0 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; + }; + + - | + adc@126c0000 { + compatible = "samsung,exynos3250-adc"; + reg = <0x126C0000 0x100>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu 0>, // CLK_TSADC + <&cmu 1>; // CLK_SCLK_TSADC + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + }; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-09-07 9:21 UTC|newest] Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-09-07 9:19 [PATCH v2 01/11] dt-bindings: power: syscon-reboot: Convert bindings to json-schema Krzysztof Kozlowski 2019-09-07 9:19 ` Krzysztof Kozlowski 2019-09-07 9:19 ` [PATCH v2 02/11] dt-bindings: power: syscon-poweroff: " Krzysztof Kozlowski 2019-09-07 9:19 ` Krzysztof Kozlowski 2019-09-18 12:56 ` Rob Herring 2019-09-18 12:56 ` Rob Herring 2019-09-07 9:19 ` [PATCH v2 03/11] dt-bindings: arm: samsung: Convert Samsung board/soc " Krzysztof Kozlowski 2019-09-07 9:19 ` Krzysztof Kozlowski 2019-09-18 12:56 ` Rob Herring 2019-09-18 12:56 ` Rob Herring 2019-09-07 9:20 ` [PATCH v2 04/11] dt-bindings: arm: samsung: Document missing S5Pv210 boards bindings Krzysztof Kozlowski 2019-09-07 9:20 ` Krzysztof Kozlowski 2019-09-18 12:56 ` Rob Herring 2019-09-18 12:56 ` Rob Herring 2019-09-07 9:20 ` [PATCH v2 05/11] dt-bindings: arm: samsung: Document missing Exynos7 " Krzysztof Kozlowski 2019-09-07 9:20 ` Krzysztof Kozlowski 2019-09-18 12:56 ` Rob Herring 2019-09-18 12:56 ` Rob Herring 2019-09-07 9:20 ` [PATCH v2 06/11] dt-bindings: arm: samsung: Convert Exynos Chipid bindings to json-schema Krzysztof Kozlowski 2019-09-07 9:20 ` Krzysztof Kozlowski 2019-09-18 12:57 ` Rob Herring 2019-09-18 12:57 ` Rob Herring 2019-09-07 9:20 ` [PATCH v2 07/11] dt-bindings: arm: samsung: Convert Exynos PMU " Krzysztof Kozlowski 2019-09-07 9:20 ` Krzysztof Kozlowski 2019-09-18 12:43 ` Rob Herring 2019-09-18 12:43 ` Rob Herring 2019-09-18 13:17 ` Krzysztof Kozlowski 2019-09-18 13:17 ` Krzysztof Kozlowski 2019-09-07 9:20 ` [PATCH v2 08/11] dt-bindings: arm: samsung: Convert Exynos System Registers " Krzysztof Kozlowski 2019-09-07 9:20 ` Krzysztof Kozlowski 2019-09-18 12:36 ` Rob Herring 2019-09-18 12:36 ` Rob Herring 2019-09-18 13:07 ` Krzysztof Kozlowski 2019-09-18 13:07 ` Krzysztof Kozlowski 2019-09-07 9:20 ` [PATCH v2 09/11] dt-bindings: rtc: s3c: Convert S3C/Exynos RTC " Krzysztof Kozlowski 2019-09-07 9:20 ` Krzysztof Kozlowski 2019-09-18 12:57 ` Rob Herring 2019-09-18 12:57 ` Rob Herring 2019-09-07 9:20 ` Krzysztof Kozlowski [this message] 2019-09-07 9:20 ` [PATCH v2 10/11] dt-bindings: iio: adc: exynos: Convert Exynos ADC " Krzysztof Kozlowski 2019-09-08 12:29 ` Jonathan Cameron 2019-09-08 12:29 ` Jonathan Cameron 2019-09-18 12:58 ` Rob Herring 2019-09-18 12:58 ` Rob Herring 2019-09-07 9:20 ` [PATCH v2 11/11] dt-bindings: iio: adc: exynos: Remove old requirement of two register address ranges Krzysztof Kozlowski 2019-09-07 9:20 ` Krzysztof Kozlowski 2019-09-08 12:31 ` Jonathan Cameron 2019-09-08 12:31 ` Jonathan Cameron 2019-09-18 12:58 ` Rob Herring 2019-09-18 12:58 ` Rob Herring 2019-09-18 12:55 ` [PATCH v2 01/11] dt-bindings: power: syscon-reboot: Convert bindings to json-schema Rob Herring 2019-09-18 12:55 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190907092007.9946-10-krzk@kernel.org \ --to=krzk@kernel.org \ --cc=a.zummo@towertech.it \ --cc=alexandre.belloni@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=jic23@kernel.org \ --cc=kgene@kernel.org \ --cc=knaack.h@gmx.de \ --cc=lars@metafoo.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-iio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-rtc@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=pawel.mikolaj.chmiel@gmail.com \ --cc=pmeerw@pmeerw.net \ --cc=robh+dt@kernel.org \ --cc=sre@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.