[PATCH v4 2/8] iio: adc: max1027: Make it optional to use interrupts

From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: <devicetree@vger.kernel.org>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v4 2/8] iio: adc: max1027: Make it optional to use interrupts
Date: Fri, 11 Oct 2019 16:43:41 +0200	[thread overview]
Message-ID: <20191011144347.19146-3-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20191011144347.19146-1-miquel.raynal@bootlin.com>

The chip has a 'start conversion' and a 'end of conversion' pair of
pins. They can be used but this is absolutely not mandatory as regular
polling of the value is totally fine with the current internal
clocking setup. Turn the interrupts optional and do not error out if
they are not inquired in the device tree. This has the effect to
prevent triggered buffers use though.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/iio/adc/max1027.c | 57 +++++++++++++++++++++------------------
 1 file changed, 31 insertions(+), 26 deletions(-)

diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index 6cdfe9ef73fc..823223b77a70 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -430,35 +430,40 @@ static int max1027_probe(struct spi_device *spi)
 		return -ENOMEM;
 	}
 
-	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
-					&iio_pollfunc_store_time,
-					&max1027_trigger_handler, NULL);
-	if (ret < 0) {
-		dev_err(&indio_dev->dev, "Failed to setup buffer\n");
-		return ret;
-	}
+	if (spi->irq) {
+		ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+						      &iio_pollfunc_store_time,
+						      &max1027_trigger_handler,
+						      NULL);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev, "Failed to setup buffer\n");
+			return ret;
+		}
 
-	st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-trigger",
-							indio_dev->name);
-	if (st->trig == NULL) {
-		ret = -ENOMEM;
-		dev_err(&indio_dev->dev, "Failed to allocate iio trigger\n");
-		return ret;
-	}
+		st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-trigger",
+						  indio_dev->name);
+		if (st->trig == NULL) {
+			ret = -ENOMEM;
+			dev_err(&indio_dev->dev,
+				"Failed to allocate iio trigger\n");
+			return ret;
+		}
 
-	st->trig->ops = &max1027_trigger_ops;
-	st->trig->dev.parent = &spi->dev;
-	iio_trigger_set_drvdata(st->trig, indio_dev);
-	iio_trigger_register(st->trig);
+		st->trig->ops = &max1027_trigger_ops;
+		st->trig->dev.parent = &spi->dev;
+		iio_trigger_set_drvdata(st->trig, indio_dev);
+		iio_trigger_register(st->trig);
 
-	ret = devm_request_threaded_irq(&spi->dev, spi->irq,
-					iio_trigger_generic_data_rdy_poll,
-					NULL,
-					IRQF_TRIGGER_FALLING,
-					spi->dev.driver->name, st->trig);
-	if (ret < 0) {
-		dev_err(&indio_dev->dev, "Failed to allocate IRQ.\n");
-		return ret;
+		ret = devm_request_threaded_irq(&spi->dev, spi->irq,
+						iio_trigger_generic_data_rdy_poll,
+						NULL,
+						IRQF_TRIGGER_FALLING,
+						spi->dev.driver->name,
+						st->trig);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev, "Failed to allocate IRQ.\n");
+			return ret;
+		}
 	}
 
 	/* Disable averaging */
-- 
2.20.1

