From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: <linux-omap@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Benoit Parrot <bparrot@ti.com>
Subject: [Patch v3 09/10] arm64: dts: k3-am65-main Add CAL node
Date: Tue, 12 Nov 2019 08:27:52 -0600 [thread overview]
Message-ID: <20191112142753.22976-10-bparrot@ti.com> (raw)
In-Reply-To: <20191112142753.22976-1-bparrot@ti.com>
Add CAL dtsi node for AM654 device. Including proper power-domains and
clock properties.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 799c75fa7981..4c65ed445e8b 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -516,4 +516,27 @@
dma-coherent;
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
};
+
+ cal: cal@6f03000 {
+ compatible = "ti,am654-cal";
+ reg = <0x0 0x06f03000 0x0 0x400>,
+ <0x0 0x06f03800 0x0 0x40>;
+ reg-names = "cal_top",
+ "cal_rx_core0";
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ ti,camerrx-control = <&scm_conf 0x40c0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 2 0>;
+ power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ };
+ };
+ };
};
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: linux-omap@vger.kernel.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Benoit Parrot <bparrot@ti.com>
Subject: [Patch v3 09/10] arm64: dts: k3-am65-main Add CAL node
Date: Tue, 12 Nov 2019 08:27:52 -0600 [thread overview]
Message-ID: <20191112142753.22976-10-bparrot@ti.com> (raw)
In-Reply-To: <20191112142753.22976-1-bparrot@ti.com>
Add CAL dtsi node for AM654 device. Including proper power-domains and
clock properties.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 799c75fa7981..4c65ed445e8b 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -516,4 +516,27 @@
dma-coherent;
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
};
+
+ cal: cal@6f03000 {
+ compatible = "ti,am654-cal";
+ reg = <0x0 0x06f03000 0x0 0x400>,
+ <0x0 0x06f03800 0x0 0x40>;
+ reg-names = "cal_top",
+ "cal_rx_core0";
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ ti,camerrx-control = <&scm_conf 0x40c0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 2 0>;
+ power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ };
+ };
+ };
};
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Benoit Parrot <bparrot@ti.com>,
linux-omap@vger.kernel.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [Patch v3 09/10] arm64: dts: k3-am65-main Add CAL node
Date: Tue, 12 Nov 2019 08:27:52 -0600 [thread overview]
Message-ID: <20191112142753.22976-10-bparrot@ti.com> (raw)
In-Reply-To: <20191112142753.22976-1-bparrot@ti.com>
Add CAL dtsi node for AM654 device. Including proper power-domains and
clock properties.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 799c75fa7981..4c65ed445e8b 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -516,4 +516,27 @@
dma-coherent;
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
};
+
+ cal: cal@6f03000 {
+ compatible = "ti,am654-cal";
+ reg = <0x0 0x06f03000 0x0 0x400>,
+ <0x0 0x06f03800 0x0 0x40>;
+ reg-names = "cal_top",
+ "cal_rx_core0";
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ ti,camerrx-control = <&scm_conf 0x40c0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 2 0>;
+ power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ };
+ };
+ };
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-12 14:25 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-12 14:27 [Patch v3 00/10] ARM: dts: dra7: add cal nodes Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 01/10] clk: ti: dra7: add cam clkctrl data Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 15:27 ` Tony Lindgren
2019-11-12 15:27 ` Tony Lindgren
2019-11-18 17:38 ` Rob Herring
2019-11-18 17:38 ` Rob Herring
2019-11-18 17:38 ` Rob Herring
2019-11-12 14:27 ` [Patch v3 02/10] ARM: dts: dra7: add cam clkctrl node Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 15:29 ` Tony Lindgren
2019-11-12 15:29 ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 03/10] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 15:31 ` Tony Lindgren
2019-11-12 15:31 ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 04/10] ARM: dts: dra7-l4: Add ti-sysc node for CAM Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 05/10] ARM: dts: DRA72: Add CAL dtsi node Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 15:34 ` Tony Lindgren
2019-11-12 15:34 ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 06/10] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 07/10] arm: dtsi: dra76x: Add CAL dtsi node Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 08/10] arm: dts: dra76-evm: Add CAL and OV5640 nodes Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot [this message]
2019-11-12 14:27 ` [Patch v3 09/10] arm64: dts: k3-am65-main Add CAL node Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 15:38 ` Tony Lindgren
2019-11-12 15:38 ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 10/10] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191112142753.22976-10-bparrot@ti.com \
--to=bparrot@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.