From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: <linux-omap@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Benoit Parrot <bparrot@ti.com>
Subject: [Patch v3 04/10] ARM: dts: dra7-l4: Add ti-sysc node for CAM
Date: Tue, 12 Nov 2019 08:27:47 -0600 [thread overview]
Message-ID: <20191112142753.22976-5-bparrot@ti.com> (raw)
In-Reply-To: <20191112142753.22976-1-bparrot@ti.com>
Add CAM nodes as a child of l4 interconnect in order for it to probe
using ti-sysc.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm/boot/dts/dra7-l4.dtsi | 43 +++++++++++++++++++++++++++++-----
1 file changed, 37 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 0917231a20e2..8f5c26a4f7c8 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4135,27 +4135,58 @@
};
target-module@170000 { /* 0x48970000, ap 21 0a.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x170010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x170000 0x10000>;
+ status = "disabled";
};
target-module@190000 { /* 0x48990000, ap 23 2e.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x190010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x190000 0x10000>;
+ status = "disabled";
};
target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x1b0000 0x4>,
+ <0x1b0010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1b0000 0x10000>;
+ status = "disabled";
};
target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: linux-omap@vger.kernel.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Benoit Parrot <bparrot@ti.com>
Subject: [Patch v3 04/10] ARM: dts: dra7-l4: Add ti-sysc node for CAM
Date: Tue, 12 Nov 2019 08:27:47 -0600 [thread overview]
Message-ID: <20191112142753.22976-5-bparrot@ti.com> (raw)
In-Reply-To: <20191112142753.22976-1-bparrot@ti.com>
Add CAM nodes as a child of l4 interconnect in order for it to probe
using ti-sysc.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm/boot/dts/dra7-l4.dtsi | 43 +++++++++++++++++++++++++++++-----
1 file changed, 37 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 0917231a20e2..8f5c26a4f7c8 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4135,27 +4135,58 @@
};
target-module@170000 { /* 0x48970000, ap 21 0a.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x170010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x170000 0x10000>;
+ status = "disabled";
};
target-module@190000 { /* 0x48990000, ap 23 2e.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x190010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x190000 0x10000>;
+ status = "disabled";
};
target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x1b0000 0x4>,
+ <0x1b0010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1b0000 0x10000>;
+ status = "disabled";
};
target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Benoit Parrot <bparrot@ti.com>,
linux-omap@vger.kernel.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [Patch v3 04/10] ARM: dts: dra7-l4: Add ti-sysc node for CAM
Date: Tue, 12 Nov 2019 08:27:47 -0600 [thread overview]
Message-ID: <20191112142753.22976-5-bparrot@ti.com> (raw)
In-Reply-To: <20191112142753.22976-1-bparrot@ti.com>
Add CAM nodes as a child of l4 interconnect in order for it to probe
using ti-sysc.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm/boot/dts/dra7-l4.dtsi | 43 +++++++++++++++++++++++++++++-----
1 file changed, 37 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 0917231a20e2..8f5c26a4f7c8 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4135,27 +4135,58 @@
};
target-module@170000 { /* 0x48970000, ap 21 0a.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x170010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x170000 0x10000>;
+ status = "disabled";
};
target-module@190000 { /* 0x48990000, ap 23 2e.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x190010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x190000 0x10000>;
+ status = "disabled";
};
target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x1b0000 0x4>,
+ <0x1b0010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1b0000 0x10000>;
+ status = "disabled";
};
target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-12 14:25 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-12 14:27 [Patch v3 00/10] ARM: dts: dra7: add cal nodes Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 01/10] clk: ti: dra7: add cam clkctrl data Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 15:27 ` Tony Lindgren
2019-11-12 15:27 ` Tony Lindgren
2019-11-18 17:38 ` Rob Herring
2019-11-18 17:38 ` Rob Herring
2019-11-18 17:38 ` Rob Herring
2019-11-12 14:27 ` [Patch v3 02/10] ARM: dts: dra7: add cam clkctrl node Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 15:29 ` Tony Lindgren
2019-11-12 15:29 ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 03/10] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 15:31 ` Tony Lindgren
2019-11-12 15:31 ` Tony Lindgren
2019-11-12 14:27 ` Benoit Parrot [this message]
2019-11-12 14:27 ` [Patch v3 04/10] ARM: dts: dra7-l4: Add ti-sysc node for CAM Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 05/10] ARM: dts: DRA72: Add CAL dtsi node Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 15:34 ` Tony Lindgren
2019-11-12 15:34 ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 06/10] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 07/10] arm: dtsi: dra76x: Add CAL dtsi node Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 08/10] arm: dts: dra76-evm: Add CAL and OV5640 nodes Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 09/10] arm64: dts: k3-am65-main Add CAL node Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 15:38 ` Tony Lindgren
2019-11-12 15:38 ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 10/10] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191112142753.22976-5-bparrot@ti.com \
--to=bparrot@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.