From: Lu Baolu <baolu.lu@linux.intel.com> To: Joerg Roedel <joro@8bytes.org>, David Woodhouse <dwmw2@infradead.org>, Alex Williamson <alex.williamson@redhat.com> Cc: ashok.raj@intel.com, sanjay.k.kumar@intel.com, jacob.jun.pan@linux.intel.com, kevin.tian@intel.com, yi.l.liu@intel.com, yi.y.sun@intel.com, Peter Xu <peterx@redhat.com>, iommu@lists.linux-foundation.org, kvm@vger.kernel.org, linux-kernel@vger.kernel.org, Lu Baolu <baolu.lu@linux.intel.com> Subject: [PATCH v5 0/9] Use 1st-level for IOVA translation Date: Tue, 24 Dec 2019 15:44:53 +0800 [thread overview] Message-ID: <20191224074502.5545-1-baolu.lu@linux.intel.com> (raw) Intel VT-d in scalable mode supports two types of page tables for DMA translation: the first level page table and the second level page table. The first level page table uses the same format as the CPU page table, while the second level page table keeps compatible with previous formats. The software is able to choose any one of them for DMA remapping according to the use case. This patchset aims to move IOVA (I/O Virtual Address) translation to 1st-level page table in scalable mode. This will simplify vIOMMU (IOMMU simulated by VM hypervisor) design by using the two-stage translation, a.k.a. nested mode translation. As Intel VT-d architecture offers caching mode, guest IOVA (GIOVA) support is currently implemented in a shadow page manner. The device simulation software, like QEMU, has to figure out GIOVA->GPA mappings and write them to a shadowed page table, which will be used by the physical IOMMU. Each time when mappings are created or destroyed in vIOMMU, the simulation software has to intervene. Hence, the changes on GIOVA->GPA could be shadowed to host. .-----------. | vIOMMU | |-----------| .--------------------. | |IOTLB flush trap | QEMU | .-----------. (map/unmap) |--------------------| |GIOVA->GPA |---------------->| .------------. | '-----------' | | GIOVA->HPA | | | | | '------------' | '-----------' | | | | '--------------------' | <------------------------------------ | v VFIO/IOMMU API .-----------. | pIOMMU | |-----------| | | .-----------. |GIOVA->HPA | '-----------' | | '-----------' In VT-d 3.0, scalable mode is introduced, which offers two-level translation page tables and nested translation mode. Regards to GIOVA support, it can be simplified by 1) moving the GIOVA support over 1st-level page table to store GIOVA->GPA mapping in vIOMMU, 2) binding vIOMMU 1st level page table to the pIOMMU, 3) using pIOMMU second level for GPA->HPA translation, and 4) enable nested (a.k.a. dual-stage) translation in host. Compared with current shadow GIOVA support, the new approach makes the vIOMMU design simpler and more efficient as we only need to flush the pIOMMU IOTLB and possible device-IOTLB when an IOVA mapping in vIOMMU is torn down. .-----------. | vIOMMU | |-----------| .-----------. | |IOTLB flush trap | QEMU | .-----------. (unmap) |-----------| |GIOVA->GPA |---------------->| | '-----------' '-----------' | | | '-----------' | <------------------------------ | VFIO/IOMMU | cache invalidation and | guest gpd bind interfaces v .-----------. | pIOMMU | |-----------| .-----------. |GIOVA->GPA |<---First level '-----------' | GPA->HPA |<---Scond level '-----------' '-----------' This patch applies the first level page table for IOVA translation unless the DOMAIN_ATTR_NESTING domain attribution has been set. Setting of this attribution means the second level will be used to map gPA (guest physical address) to hPA (host physical address), and the mappings between gVA (guest virtual address) and gPA will be maintained by the guest with the page table address binding to host's first level. Based-on-idea-by: Ashok Raj <ashok.raj@intel.com> Based-on-idea-by: Kevin Tian <kevin.tian@intel.com> Based-on-idea-by: Liu Yi L <yi.l.liu@intel.com> Based-on-idea-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Based-on-idea-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Based-on-idea-by: Lu Baolu <baolu.lu@linux.intel.com> Change log: v4->v5: - The previous version was posted here https://lkml.org/lkml/2019/12/18/1371 - Set Execute Disable in first level page directory entries. - Make first level IOVA canonical. - Update first level super page capability. v3->v4: - The previous version was posted here https://lkml.org/lkml/2019/12/10/2126 - Set Execute Disable (bit 63) in first level table entries. - Enhance pasid-based iotlb invalidation for both default domain and auxiliary domain. - Add debugfs file to expose page table internals. v2->v3: - The previous version was posted here https://lkml.org/lkml/2019/11/27/1831 - Accept Jacob's suggestion on merging two page tables. v1->v2 - The first series was posted here https://lkml.org/lkml/2019/9/23/297 - Use per domain page table ops to handle different page tables. - Use first level for DMA remapping by default on both bare metal and vm guest. - Code refine according to code review comments for v1. Lu Baolu (9): iommu/vt-d: Identify domains using first level page table iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attr iommu/vt-d: Add PASID_FLAG_FL5LP for first-level pasid setup iommu/vt-d: Setup pasid entries for iova over first level iommu/vt-d: Flush PASID-based iotlb for iova over first level iommu/vt-d: Make first level IOVA canonical iommu/vt-d: Update first level super page capability iommu/vt-d: Use iova over first level iommu/vt-d: debugfs: Add support to show page table internals drivers/iommu/dmar.c | 41 +++++ drivers/iommu/intel-iommu-debugfs.c | 75 +++++++++ drivers/iommu/intel-iommu.c | 244 ++++++++++++++++++++++++---- drivers/iommu/intel-pasid.c | 7 +- drivers/iommu/intel-pasid.h | 6 + drivers/iommu/intel-svm.c | 8 +- include/linux/intel-iommu.h | 20 ++- 7 files changed, 359 insertions(+), 42 deletions(-) -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Lu Baolu <baolu.lu@linux.intel.com> To: Joerg Roedel <joro@8bytes.org>, David Woodhouse <dwmw2@infradead.org>, Alex Williamson <alex.williamson@redhat.com> Cc: kevin.tian@intel.com, ashok.raj@intel.com, kvm@vger.kernel.org, sanjay.k.kumar@intel.com, iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org, yi.y.sun@intel.com Subject: [PATCH v5 0/9] Use 1st-level for IOVA translation Date: Tue, 24 Dec 2019 15:44:53 +0800 [thread overview] Message-ID: <20191224074502.5545-1-baolu.lu@linux.intel.com> (raw) Intel VT-d in scalable mode supports two types of page tables for DMA translation: the first level page table and the second level page table. The first level page table uses the same format as the CPU page table, while the second level page table keeps compatible with previous formats. The software is able to choose any one of them for DMA remapping according to the use case. This patchset aims to move IOVA (I/O Virtual Address) translation to 1st-level page table in scalable mode. This will simplify vIOMMU (IOMMU simulated by VM hypervisor) design by using the two-stage translation, a.k.a. nested mode translation. As Intel VT-d architecture offers caching mode, guest IOVA (GIOVA) support is currently implemented in a shadow page manner. The device simulation software, like QEMU, has to figure out GIOVA->GPA mappings and write them to a shadowed page table, which will be used by the physical IOMMU. Each time when mappings are created or destroyed in vIOMMU, the simulation software has to intervene. Hence, the changes on GIOVA->GPA could be shadowed to host. .-----------. | vIOMMU | |-----------| .--------------------. | |IOTLB flush trap | QEMU | .-----------. (map/unmap) |--------------------| |GIOVA->GPA |---------------->| .------------. | '-----------' | | GIOVA->HPA | | | | | '------------' | '-----------' | | | | '--------------------' | <------------------------------------ | v VFIO/IOMMU API .-----------. | pIOMMU | |-----------| | | .-----------. |GIOVA->HPA | '-----------' | | '-----------' In VT-d 3.0, scalable mode is introduced, which offers two-level translation page tables and nested translation mode. Regards to GIOVA support, it can be simplified by 1) moving the GIOVA support over 1st-level page table to store GIOVA->GPA mapping in vIOMMU, 2) binding vIOMMU 1st level page table to the pIOMMU, 3) using pIOMMU second level for GPA->HPA translation, and 4) enable nested (a.k.a. dual-stage) translation in host. Compared with current shadow GIOVA support, the new approach makes the vIOMMU design simpler and more efficient as we only need to flush the pIOMMU IOTLB and possible device-IOTLB when an IOVA mapping in vIOMMU is torn down. .-----------. | vIOMMU | |-----------| .-----------. | |IOTLB flush trap | QEMU | .-----------. (unmap) |-----------| |GIOVA->GPA |---------------->| | '-----------' '-----------' | | | '-----------' | <------------------------------ | VFIO/IOMMU | cache invalidation and | guest gpd bind interfaces v .-----------. | pIOMMU | |-----------| .-----------. |GIOVA->GPA |<---First level '-----------' | GPA->HPA |<---Scond level '-----------' '-----------' This patch applies the first level page table for IOVA translation unless the DOMAIN_ATTR_NESTING domain attribution has been set. Setting of this attribution means the second level will be used to map gPA (guest physical address) to hPA (host physical address), and the mappings between gVA (guest virtual address) and gPA will be maintained by the guest with the page table address binding to host's first level. Based-on-idea-by: Ashok Raj <ashok.raj@intel.com> Based-on-idea-by: Kevin Tian <kevin.tian@intel.com> Based-on-idea-by: Liu Yi L <yi.l.liu@intel.com> Based-on-idea-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Based-on-idea-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Based-on-idea-by: Lu Baolu <baolu.lu@linux.intel.com> Change log: v4->v5: - The previous version was posted here https://lkml.org/lkml/2019/12/18/1371 - Set Execute Disable in first level page directory entries. - Make first level IOVA canonical. - Update first level super page capability. v3->v4: - The previous version was posted here https://lkml.org/lkml/2019/12/10/2126 - Set Execute Disable (bit 63) in first level table entries. - Enhance pasid-based iotlb invalidation for both default domain and auxiliary domain. - Add debugfs file to expose page table internals. v2->v3: - The previous version was posted here https://lkml.org/lkml/2019/11/27/1831 - Accept Jacob's suggestion on merging two page tables. v1->v2 - The first series was posted here https://lkml.org/lkml/2019/9/23/297 - Use per domain page table ops to handle different page tables. - Use first level for DMA remapping by default on both bare metal and vm guest. - Code refine according to code review comments for v1. Lu Baolu (9): iommu/vt-d: Identify domains using first level page table iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attr iommu/vt-d: Add PASID_FLAG_FL5LP for first-level pasid setup iommu/vt-d: Setup pasid entries for iova over first level iommu/vt-d: Flush PASID-based iotlb for iova over first level iommu/vt-d: Make first level IOVA canonical iommu/vt-d: Update first level super page capability iommu/vt-d: Use iova over first level iommu/vt-d: debugfs: Add support to show page table internals drivers/iommu/dmar.c | 41 +++++ drivers/iommu/intel-iommu-debugfs.c | 75 +++++++++ drivers/iommu/intel-iommu.c | 244 ++++++++++++++++++++++++---- drivers/iommu/intel-pasid.c | 7 +- drivers/iommu/intel-pasid.h | 6 + drivers/iommu/intel-svm.c | 8 +- include/linux/intel-iommu.h | 20 ++- 7 files changed, 359 insertions(+), 42 deletions(-) -- 2.17.1 _______________________________________________ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
next reply other threads:[~2019-12-24 7:46 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-24 7:44 Lu Baolu [this message] 2019-12-24 7:44 ` [PATCH v5 0/9] Use 1st-level for IOVA translation Lu Baolu 2019-12-24 7:44 ` [PATCH v5 1/9] iommu/vt-d: Identify domains using first level page table Lu Baolu 2019-12-24 7:44 ` Lu Baolu 2019-12-24 7:44 ` [PATCH v5 2/9] iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attr Lu Baolu 2019-12-24 7:44 ` Lu Baolu 2019-12-24 7:44 ` [PATCH v5 3/9] iommu/vt-d: Add PASID_FLAG_FL5LP for first-level pasid setup Lu Baolu 2019-12-24 7:44 ` Lu Baolu 2019-12-24 7:44 ` [PATCH v5 4/9] iommu/vt-d: Setup pasid entries for iova over first level Lu Baolu 2019-12-24 7:44 ` Lu Baolu 2019-12-24 7:44 ` [PATCH v5 5/9] iommu/vt-d: Flush PASID-based iotlb " Lu Baolu 2019-12-24 7:44 ` Lu Baolu 2019-12-24 7:44 ` [PATCH v5 6/9] iommu/vt-d: Make first level IOVA canonical Lu Baolu 2019-12-24 7:44 ` Lu Baolu 2019-12-24 7:45 ` [PATCH v5 7/9] iommu/vt-d: Update first level super page capability Lu Baolu 2019-12-24 7:45 ` Lu Baolu 2019-12-24 7:45 ` [PATCH v5 8/9] iommu/vt-d: Use iova over first level Lu Baolu 2019-12-24 7:45 ` Lu Baolu 2019-12-24 7:45 ` [PATCH v5 9/9] iommu/vt-d: debugfs: Add support to show page table internals Lu Baolu 2019-12-24 7:45 ` Lu Baolu 2020-01-01 23:38 ` [PATCH v5 0/9] Use 1st-level for IOVA translation Lu Baolu 2020-01-01 23:38 ` Lu Baolu 2020-01-02 2:31 ` Liu, Yi L 2020-01-02 2:31 ` Liu, Yi L 2020-01-02 2:32 ` Lu Baolu 2020-01-02 2:32 ` Lu Baolu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191224074502.5545-1-baolu.lu@linux.intel.com \ --to=baolu.lu@linux.intel.com \ --cc=alex.williamson@redhat.com \ --cc=ashok.raj@intel.com \ --cc=dwmw2@infradead.org \ --cc=iommu@lists.linux-foundation.org \ --cc=jacob.jun.pan@linux.intel.com \ --cc=joro@8bytes.org \ --cc=kevin.tian@intel.com \ --cc=kvm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=peterx@redhat.com \ --cc=sanjay.k.kumar@intel.com \ --cc=yi.l.liu@intel.com \ --cc=yi.y.sun@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.