From: Andre Przywara <andre.przywara@arm.com> To: Rob Herring <robh@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Cc: Robert Richter <rric@kernel.org>, soc@kernel.org, Jon Loeliger <jdl@jdl.com>, Mark Langsdorf <mlangsdo@redhat.com>, Eric Auger <eric.auger@redhat.com>, Will Deacon <will@kernel.org>, Catalin Marinas <catalin.marinas@arm.com> Subject: [PATCH 08/13] dt-bindings: phy: Convert Calxeda ComboPHY binding to json-schema Date: Wed, 26 Feb 2020 18:08:56 +0000 [thread overview] Message-ID: <20200226180901.89940-9-andre.przywara@arm.com> (raw) In-Reply-To: <20200226180901.89940-1-andre.przywara@arm.com> Convert the Calxeda ComboPHY binding to DT schema format using json-schema. There is no driver in the Linux kernel matching the compatible string, but the nodes are parsed by the SATA driver, which links to them using its port-phys property. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- .../bindings/phy/calxeda-combophy.txt | 17 ------- .../bindings/phy/calxeda-combophy.yaml | 47 +++++++++++++++++++ 2 files changed, 47 insertions(+), 17 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.txt create mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.yaml diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt b/Documentation/devicetree/bindings/phy/calxeda-combophy.txt deleted file mode 100644 index 6622bdb2e8bc..000000000000 --- a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt +++ /dev/null @@ -1,17 +0,0 @@ -Calxeda Highbank Combination Phys for SATA - -Properties: -- compatible : Should be "calxeda,hb-combophy" -- #phy-cells: Should be 1. -- reg : Address and size for Combination Phy registers. -- phydev: device ID for programming the combophy. - -Example: - - combophy5: combo-phy@fff5d000 { - compatible = "calxeda,hb-combophy"; - #phy-cells = <1>; - reg = <0xfff5d000 0x1000>; - phydev = <31>; - }; - diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml new file mode 100644 index 000000000000..2ef68b95fae1 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/calxeda-combophy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank Combination PHYs binding for SATA + +description: | + The Calxeda Combination PHYs connect the SoC to the internal fabric + and to SATA connectors. The PHYs support multiple protocols (SATA, + SGMII, PCIe) and can be assigned to different devices (SATA or XGMAC + controller). + Programming the PHYs is typically handled by those device drivers, + not by a dedicated PHY driver. + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +properties: + compatible: + const: calxeda,hb-combophy + + '#phy-cells': + const: 1 + + reg: + maxItems: 1 + + phydev: + description: device ID for programming the combophy. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - phydev + - '#phy-cells' + +examples: + - | + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com> To: Rob Herring <robh@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Cc: Jon Loeliger <jdl@jdl.com>, Mark Langsdorf <mlangsdo@redhat.com>, Robert Richter <rric@kernel.org>, Catalin Marinas <catalin.marinas@arm.com>, Eric Auger <eric.auger@redhat.com>, soc@kernel.org, Will Deacon <will@kernel.org> Subject: [PATCH 08/13] dt-bindings: phy: Convert Calxeda ComboPHY binding to json-schema Date: Wed, 26 Feb 2020 18:08:56 +0000 [thread overview] Message-ID: <20200226180901.89940-9-andre.przywara@arm.com> (raw) In-Reply-To: <20200226180901.89940-1-andre.przywara@arm.com> Convert the Calxeda ComboPHY binding to DT schema format using json-schema. There is no driver in the Linux kernel matching the compatible string, but the nodes are parsed by the SATA driver, which links to them using its port-phys property. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- .../bindings/phy/calxeda-combophy.txt | 17 ------- .../bindings/phy/calxeda-combophy.yaml | 47 +++++++++++++++++++ 2 files changed, 47 insertions(+), 17 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.txt create mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.yaml diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt b/Documentation/devicetree/bindings/phy/calxeda-combophy.txt deleted file mode 100644 index 6622bdb2e8bc..000000000000 --- a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt +++ /dev/null @@ -1,17 +0,0 @@ -Calxeda Highbank Combination Phys for SATA - -Properties: -- compatible : Should be "calxeda,hb-combophy" -- #phy-cells: Should be 1. -- reg : Address and size for Combination Phy registers. -- phydev: device ID for programming the combophy. - -Example: - - combophy5: combo-phy@fff5d000 { - compatible = "calxeda,hb-combophy"; - #phy-cells = <1>; - reg = <0xfff5d000 0x1000>; - phydev = <31>; - }; - diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml new file mode 100644 index 000000000000..2ef68b95fae1 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/calxeda-combophy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank Combination PHYs binding for SATA + +description: | + The Calxeda Combination PHYs connect the SoC to the internal fabric + and to SATA connectors. The PHYs support multiple protocols (SATA, + SGMII, PCIe) and can be assigned to different devices (SATA or XGMAC + controller). + Programming the PHYs is typically handled by those device drivers, + not by a dedicated PHY driver. + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +properties: + compatible: + const: calxeda,hb-combophy + + '#phy-cells': + const: 1 + + reg: + maxItems: 1 + + phydev: + description: device ID for programming the combophy. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - phydev + - '#phy-cells' + +examples: + - | + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-26 18:09 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-26 18:08 [PATCH 00/13] arm: calxeda: update DTS, bindings and MAINTAINERS Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 01/13] arm: dts: calxeda: Basic DT file fixes Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 02/13] arm: dts: calxeda: Provide UART clock Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 03/13] arm: dts: calxeda: Fix interrupt grouping Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 04/13] arm: dts: calxeda: Group port-phys and sgpio-gpio items Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 05/13] dt-bindings: clock: Convert Calxeda clock bindings to json-schema Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:24 ` Maxime Ripard 2020-02-26 18:24 ` Maxime Ripard 2020-02-26 18:08 ` [PATCH 06/13] dt-bindings: sata: Convert Calxeda SATA controller " Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:25 ` Maxime Ripard 2020-02-26 18:25 ` Maxime Ripard 2020-02-26 18:08 ` [PATCH 07/13] dt-bindings: net: Convert Calxeda Ethernet binding " Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:26 ` Maxime Ripard 2020-02-26 18:26 ` Maxime Ripard 2020-02-26 18:08 ` Andre Przywara [this message] 2020-02-26 18:08 ` [PATCH 08/13] dt-bindings: phy: Convert Calxeda ComboPHY " Andre Przywara 2020-02-26 18:26 ` Maxime Ripard 2020-02-26 18:26 ` Maxime Ripard 2020-02-26 18:08 ` [PATCH 09/13] dt-bindings: arm: Convert Calxeda L2 cache controller " Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 10/13] dt-bindings: memory-controllers: convert Calxeda DDR " Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:27 ` Maxime Ripard 2020-02-26 18:27 ` Maxime Ripard 2020-02-26 18:08 ` [PATCH 11/13] dt-bindings: ipmi: Convert IPMI-SMIC bindings " Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:09 ` [PATCH 12/13] dt-bindings: arm: Add Calxeda system registers json-schema binding Andre Przywara 2020-02-26 18:09 ` Andre Przywara 2020-02-26 21:57 ` Rob Herring 2020-02-26 21:57 ` Rob Herring 2020-02-27 0:12 ` André Przywara 2020-02-27 0:12 ` André Przywara 2020-02-27 14:44 ` Rob Herring 2020-02-27 14:44 ` Rob Herring 2020-02-26 18:09 ` [PATCH 13/13] MAINTAINERS: Update Calxeda Highbank maintainership Andre Przywara 2020-02-26 18:09 ` Andre Przywara
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200226180901.89940-9-andre.przywara@arm.com \ --to=andre.przywara@arm.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=eric.auger@redhat.com \ --cc=jdl@jdl.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mlangsdo@redhat.com \ --cc=robh@kernel.org \ --cc=rric@kernel.org \ --cc=soc@kernel.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.