From: Geert Uytterhoeven <geert+renesas@glider.be> To: Yoshinori Sato <ysato@users.sourceforge.jp>, Rich Felker <dalias@libc.org> Cc: Andrew Morton <akpm@linux-foundation.org>, Mike Rapoport <rppt@linux.ibm.com>, Dmitry Safonov <0x7f454c46@gmail.com>, Guenter Roeck <linux@roeck-us.net>, linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH v2 8/9] sh: pci: Modernize printing of kernel messages Date: Wed, 17 Jun 2020 14:36:38 +0000 [thread overview] Message-ID: <20200617143639.18315-9-geert+renesas@glider.be> (raw) In-Reply-To: <20200617143639.18315-1-geert+renesas@glider.be> - Convert from printk() to pr_*(), - Add missing continuations, - Join broken messages. Note that printk(KERN_DEBUG ...) is retained, to preserve behavior (pr_debug() is a dummy if DEBUG is not defined). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Guenter Roeck <linux@roeck-us.net> --- v2: - Add Tested-by, - Add note about printk(KERN_DEBUG ...). --- arch/sh/drivers/pci/common.c | 6 +++--- arch/sh/drivers/pci/pci-sh7780.c | 23 +++++++++++------------ arch/sh/drivers/pci/pci.c | 11 +++++------ 3 files changed, 19 insertions(+), 21 deletions(-) diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c index fe163ecd07197073..2fd2b77e12cec1f2 100644 --- a/arch/sh/drivers/pci/common.c +++ b/arch/sh/drivers/pci/common.c @@ -54,7 +54,7 @@ int __init pci_is_66mhz_capable(struct pci_channel *hose, int cap66 = -1; u16 stat; - printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n"); + pr_info("PCI: Checking 66MHz capabilities...\n"); for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { if (PCI_FUNC(pci_devfn)) @@ -134,7 +134,7 @@ unsigned int pcibios_handle_status_errors(unsigned long addr, pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_REC_MASTER_ABORT, 1); - printk("\n"); + pr_cont("\n"); cmd |= PCI_STATUS_REC_TARGET_ABORT; } @@ -143,7 +143,7 @@ unsigned int pcibios_handle_status_errors(unsigned long addr, printk(KERN_DEBUG "PCI: parity error detected: "); pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1); - printk("\n"); + pr_cont("\n"); cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY; diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 287b3a68570cf0ff..9a624a6ee3547924 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -148,7 +148,7 @@ static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id) printk(KERN_DEBUG "PCI: system error received: "); pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1); - printk("\n"); + pr_cont("\n"); /* Deassert SERR */ __raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM); @@ -179,7 +179,7 @@ static int __init sh7780_pci_setup_irqs(struct pci_channel *hose) ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0, "PCI SERR interrupt", hose); if (unlikely(ret)) { - printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n"); + pr_err("PCI: Failed hooking SERR IRQ\n"); return ret; } @@ -250,7 +250,7 @@ static int __init sh7780_pci_init(void) const char *type; int ret, i; - printk(KERN_NOTICE "PCI: Starting initialization.\n"); + pr_notice("PCI: Starting initialization.\n"); chan->reg_base = 0xfe040000; @@ -270,7 +270,7 @@ static int __init sh7780_pci_init(void) id = __raw_readw(chan->reg_base + PCI_VENDOR_ID); if (id != PCI_VENDOR_ID_RENESAS) { - printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id); + pr_err("PCI: Unknown vendor ID 0x%04x.\n", id); return -ENODEV; } @@ -281,14 +281,13 @@ static int __init sh7780_pci_init(void) (id = PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" : NULL; if (unlikely(!type)) { - printk(KERN_ERR "PCI: Found an unsupported Renesas host " - "controller, device id 0x%04x.\n", id); + pr_err("PCI: Found an unsupported Renesas host controller, device id 0x%04x.\n", + id); return -EINVAL; } - printk(KERN_NOTICE "PCI: Found a Renesas %s host " - "controller, revision %d.\n", type, - __raw_readb(chan->reg_base + PCI_REVISION_ID)); + pr_notice("PCI: Found a Renesas %s host controller, revision %d.\n", + type, __raw_readb(chan->reg_base + PCI_REVISION_ID)); /* * Now throw it in to register initialization mode and @@ -395,9 +394,9 @@ static int __init sh7780_pci_init(void) sh7780_pci66_init(chan); - printk(KERN_NOTICE "PCI: Running at %dMHz.\n", - (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) ? - 66 : 33); + pr_notice("PCI: Running at %dMHz.\n", + (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) + ? 66 : 33); return 0; diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index c7784e1569644d76..6ab0b7377f6634fc 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -120,8 +120,7 @@ int register_pci_controller(struct pci_channel *hose) * Do not panic here but later - this might happen before console init. */ if (!hose->io_map_base) { - printk(KERN_WARNING - "registering PCI controller with io_map_base unset\n"); + pr_warn("registering PCI controller with io_map_base unset\n"); } /* @@ -145,7 +144,7 @@ int register_pci_controller(struct pci_channel *hose) for (--i; i >= 0; i--) release_resource(&hose->resources[i]); - printk(KERN_WARNING "Skipping PCI bus scan due to resource conflict\n"); + pr_warn("Skipping PCI bus scan due to resource conflict\n"); return -1; } @@ -213,8 +212,8 @@ pcibios_bus_report_status_early(struct pci_channel *hose, pci_devfn, PCI_STATUS, status & status_mask); if (warn) - printk("(%02x:%02x: %04X) ", current_bus, - pci_devfn, status); + pr_cont("(%02x:%02x: %04X) ", current_bus, pci_devfn, + status); } } @@ -249,7 +248,7 @@ pcibios_bus_report_status(struct pci_bus *bus, unsigned int status_mask, pci_write_config_word(dev, PCI_STATUS, status & status_mask); if (warn) - printk("(%s: %04X) ", pci_name(dev), status); + pr_cont("(%s: %04X) ", pci_name(dev), status); } list_for_each_entry(dev, &bus->devices, bus_list) -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Yoshinori Sato <ysato@users.sourceforge.jp>, Rich Felker <dalias@libc.org> Cc: Andrew Morton <akpm@linux-foundation.org>, Mike Rapoport <rppt@linux.ibm.com>, Dmitry Safonov <0x7f454c46@gmail.com>, Guenter Roeck <linux@roeck-us.net>, linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH v2 8/9] sh: pci: Modernize printing of kernel messages Date: Wed, 17 Jun 2020 16:36:38 +0200 [thread overview] Message-ID: <20200617143639.18315-9-geert+renesas@glider.be> (raw) In-Reply-To: <20200617143639.18315-1-geert+renesas@glider.be> - Convert from printk() to pr_*(), - Add missing continuations, - Join broken messages. Note that printk(KERN_DEBUG ...) is retained, to preserve behavior (pr_debug() is a dummy if DEBUG is not defined). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Guenter Roeck <linux@roeck-us.net> --- v2: - Add Tested-by, - Add note about printk(KERN_DEBUG ...). --- arch/sh/drivers/pci/common.c | 6 +++--- arch/sh/drivers/pci/pci-sh7780.c | 23 +++++++++++------------ arch/sh/drivers/pci/pci.c | 11 +++++------ 3 files changed, 19 insertions(+), 21 deletions(-) diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c index fe163ecd07197073..2fd2b77e12cec1f2 100644 --- a/arch/sh/drivers/pci/common.c +++ b/arch/sh/drivers/pci/common.c @@ -54,7 +54,7 @@ int __init pci_is_66mhz_capable(struct pci_channel *hose, int cap66 = -1; u16 stat; - printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n"); + pr_info("PCI: Checking 66MHz capabilities...\n"); for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { if (PCI_FUNC(pci_devfn)) @@ -134,7 +134,7 @@ unsigned int pcibios_handle_status_errors(unsigned long addr, pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_REC_MASTER_ABORT, 1); - printk("\n"); + pr_cont("\n"); cmd |= PCI_STATUS_REC_TARGET_ABORT; } @@ -143,7 +143,7 @@ unsigned int pcibios_handle_status_errors(unsigned long addr, printk(KERN_DEBUG "PCI: parity error detected: "); pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1); - printk("\n"); + pr_cont("\n"); cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY; diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 287b3a68570cf0ff..9a624a6ee3547924 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -148,7 +148,7 @@ static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id) printk(KERN_DEBUG "PCI: system error received: "); pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1); - printk("\n"); + pr_cont("\n"); /* Deassert SERR */ __raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM); @@ -179,7 +179,7 @@ static int __init sh7780_pci_setup_irqs(struct pci_channel *hose) ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0, "PCI SERR interrupt", hose); if (unlikely(ret)) { - printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n"); + pr_err("PCI: Failed hooking SERR IRQ\n"); return ret; } @@ -250,7 +250,7 @@ static int __init sh7780_pci_init(void) const char *type; int ret, i; - printk(KERN_NOTICE "PCI: Starting initialization.\n"); + pr_notice("PCI: Starting initialization.\n"); chan->reg_base = 0xfe040000; @@ -270,7 +270,7 @@ static int __init sh7780_pci_init(void) id = __raw_readw(chan->reg_base + PCI_VENDOR_ID); if (id != PCI_VENDOR_ID_RENESAS) { - printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id); + pr_err("PCI: Unknown vendor ID 0x%04x.\n", id); return -ENODEV; } @@ -281,14 +281,13 @@ static int __init sh7780_pci_init(void) (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" : NULL; if (unlikely(!type)) { - printk(KERN_ERR "PCI: Found an unsupported Renesas host " - "controller, device id 0x%04x.\n", id); + pr_err("PCI: Found an unsupported Renesas host controller, device id 0x%04x.\n", + id); return -EINVAL; } - printk(KERN_NOTICE "PCI: Found a Renesas %s host " - "controller, revision %d.\n", type, - __raw_readb(chan->reg_base + PCI_REVISION_ID)); + pr_notice("PCI: Found a Renesas %s host controller, revision %d.\n", + type, __raw_readb(chan->reg_base + PCI_REVISION_ID)); /* * Now throw it in to register initialization mode and @@ -395,9 +394,9 @@ static int __init sh7780_pci_init(void) sh7780_pci66_init(chan); - printk(KERN_NOTICE "PCI: Running at %dMHz.\n", - (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) ? - 66 : 33); + pr_notice("PCI: Running at %dMHz.\n", + (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) + ? 66 : 33); return 0; diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index c7784e1569644d76..6ab0b7377f6634fc 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -120,8 +120,7 @@ int register_pci_controller(struct pci_channel *hose) * Do not panic here but later - this might happen before console init. */ if (!hose->io_map_base) { - printk(KERN_WARNING - "registering PCI controller with io_map_base unset\n"); + pr_warn("registering PCI controller with io_map_base unset\n"); } /* @@ -145,7 +144,7 @@ int register_pci_controller(struct pci_channel *hose) for (--i; i >= 0; i--) release_resource(&hose->resources[i]); - printk(KERN_WARNING "Skipping PCI bus scan due to resource conflict\n"); + pr_warn("Skipping PCI bus scan due to resource conflict\n"); return -1; } @@ -213,8 +212,8 @@ pcibios_bus_report_status_early(struct pci_channel *hose, pci_devfn, PCI_STATUS, status & status_mask); if (warn) - printk("(%02x:%02x: %04X) ", current_bus, - pci_devfn, status); + pr_cont("(%02x:%02x: %04X) ", current_bus, pci_devfn, + status); } } @@ -249,7 +248,7 @@ pcibios_bus_report_status(struct pci_bus *bus, unsigned int status_mask, pci_write_config_word(dev, PCI_STATUS, status & status_mask); if (warn) - printk("(%s: %04X) ", pci_name(dev), status); + pr_cont("(%s: %04X) ", pci_name(dev), status); } list_for_each_entry(dev, &bus->devices, bus_list) -- 2.17.1
next prev parent reply other threads:[~2020-06-17 14:36 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-06-17 14:36 [PATCH v2 0/9] sh: Modernize printing of kernel messages Geert Uytterhoeven 2020-06-17 14:36 ` Geert Uytterhoeven 2020-06-17 14:36 ` [PATCH v2 1/9] sh: fault: Fix duplicate printing of "PC:" Geert Uytterhoeven 2020-06-17 14:36 ` Geert Uytterhoeven 2020-06-17 14:36 ` [PATCH v2 2/9] Revert "sh: add loglvl to printk_address()" Geert Uytterhoeven 2020-06-17 14:36 ` Geert Uytterhoeven 2020-06-17 14:36 ` [PATCH v2 3/9] Revert "sh: remove needless printk()" Geert Uytterhoeven 2020-06-17 14:36 ` Geert Uytterhoeven 2020-06-17 14:36 ` [PATCH v2 4/9] sh: kernel: disassemble: Fix broken lines in disassembly dumps Geert Uytterhoeven 2020-06-17 14:36 ` Geert Uytterhoeven 2020-06-17 14:36 ` [PATCH v2 5/9] sh: dump_stack: Fix broken lines and ptrval in calltrace dumps Geert Uytterhoeven 2020-06-17 14:36 ` Geert Uytterhoeven 2020-06-17 14:36 ` [PATCH v2 6/9] sh: process: Fix broken lines in register dumps Geert Uytterhoeven 2020-06-17 14:36 ` Geert Uytterhoeven 2020-06-17 14:36 ` [PATCH v2 7/9] sh: sh2007: Modernize printing of kernel messages Geert Uytterhoeven 2020-06-17 14:36 ` Geert Uytterhoeven 2020-06-17 14:36 ` Geert Uytterhoeven [this message] 2020-06-17 14:36 ` [PATCH v2 8/9] sh: pci: " Geert Uytterhoeven 2020-06-17 14:36 ` [PATCH v2 9/9] sh: machvec: " Geert Uytterhoeven 2020-06-17 14:36 ` Geert Uytterhoeven
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200617143639.18315-9-geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=0x7f454c46@gmail.com \ --cc=akpm@linux-foundation.org \ --cc=dalias@libc.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sh@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=rppt@linux.ibm.com \ --cc=ysato@users.sourceforge.jp \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.