From: Dan Murphy <dmurphy@ti.com> To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <tiwai@suse.com>, <robh+dt@kernel.org> Cc: <devicetree@vger.kernel.org>, <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>, Dan Murphy <dmurphy@ti.com> Subject: [PATCH 7/9] ASoC: tas2770: Fix error handling with update_bits Date: Fri, 18 Sep 2020 14:05:46 -0500 [thread overview] Message-ID: <20200918190548.12598-7-dmurphy@ti.com> (raw) In-Reply-To: <20200918190548.12598-1-dmurphy@ti.com> snd_soc_update_bits returns a 1 when the bit was successfully updated, returns a 0 is no update was needed and a negative if the call failed. The code is currently failing the case of a successful update by just checking for a non-zero number. Modify these checks and return the error code only if there is a negative. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> --- sound/soc/codecs/tas2770.c | 52 ++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 28 deletions(-) diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c index 16979583cd68..3226c6d4493e 100644 --- a/sound/soc/codecs/tas2770.c +++ b/sound/soc/codecs/tas2770.c @@ -139,23 +139,18 @@ static int tas2770_dac_event(struct snd_soc_dapm_widget *w, TAS2770_PWR_CTRL, TAS2770_PWR_CTRL_MASK, TAS2770_PWR_CTRL_MUTE); - if (ret) - goto end; break; case SND_SOC_DAPM_PRE_PMD: ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL, TAS2770_PWR_CTRL_MASK, TAS2770_PWR_CTRL_SHUTDOWN); - if (ret) - goto end; break; default: dev_err(tas2770->dev, "Not supported evevt\n"); return -EINVAL; } -end: if (ret < 0) return ret; @@ -247,6 +242,9 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth) return -EINVAL; } + if (ret < 0) + return ret; + tas2770->channel_size = bitwidth; ret = snd_soc_component_update_bits(component, @@ -255,16 +253,15 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth) TAS2770_TDM_CFG_REG5_50_MASK, TAS2770_TDM_CFG_REG5_VSNS_ENABLE | tas2770->v_sense_slot); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG6, TAS2770_TDM_CFG_REG6_ISNS_MASK | TAS2770_TDM_CFG_REG6_50_MASK, TAS2770_TDM_CFG_REG6_ISNS_ENABLE | tas2770->i_sense_slot); - -end: if (ret < 0) return ret; @@ -282,36 +279,35 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate) TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_48KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, TAS2770_TDM_CFG_REG0_31_44_1_48KHZ); - if (ret) - goto end; break; case 44100: ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_44_1KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, TAS2770_TDM_CFG_REG0_31_44_1_48KHZ); - if (ret) - goto end; break; case 96000: ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_48KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, @@ -322,8 +318,9 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate) TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_44_1KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, @@ -334,22 +331,22 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate) TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_48KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, TAS2770_TDM_CFG_REG0_31_176_4_192KHZ); - if (ret) - goto end; break; case 17640: ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_44_1KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, @@ -359,7 +356,6 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate) ret = -EINVAL; } -end: if (ret < 0) return ret; -- 2.28.0
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com> To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <tiwai@suse.com>, <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Dan Murphy <dmurphy@ti.com> Subject: [PATCH 7/9] ASoC: tas2770: Fix error handling with update_bits Date: Fri, 18 Sep 2020 14:05:46 -0500 [thread overview] Message-ID: <20200918190548.12598-7-dmurphy@ti.com> (raw) In-Reply-To: <20200918190548.12598-1-dmurphy@ti.com> snd_soc_update_bits returns a 1 when the bit was successfully updated, returns a 0 is no update was needed and a negative if the call failed. The code is currently failing the case of a successful update by just checking for a non-zero number. Modify these checks and return the error code only if there is a negative. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> --- sound/soc/codecs/tas2770.c | 52 ++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 28 deletions(-) diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c index 16979583cd68..3226c6d4493e 100644 --- a/sound/soc/codecs/tas2770.c +++ b/sound/soc/codecs/tas2770.c @@ -139,23 +139,18 @@ static int tas2770_dac_event(struct snd_soc_dapm_widget *w, TAS2770_PWR_CTRL, TAS2770_PWR_CTRL_MASK, TAS2770_PWR_CTRL_MUTE); - if (ret) - goto end; break; case SND_SOC_DAPM_PRE_PMD: ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL, TAS2770_PWR_CTRL_MASK, TAS2770_PWR_CTRL_SHUTDOWN); - if (ret) - goto end; break; default: dev_err(tas2770->dev, "Not supported evevt\n"); return -EINVAL; } -end: if (ret < 0) return ret; @@ -247,6 +242,9 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth) return -EINVAL; } + if (ret < 0) + return ret; + tas2770->channel_size = bitwidth; ret = snd_soc_component_update_bits(component, @@ -255,16 +253,15 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth) TAS2770_TDM_CFG_REG5_50_MASK, TAS2770_TDM_CFG_REG5_VSNS_ENABLE | tas2770->v_sense_slot); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG6, TAS2770_TDM_CFG_REG6_ISNS_MASK | TAS2770_TDM_CFG_REG6_50_MASK, TAS2770_TDM_CFG_REG6_ISNS_ENABLE | tas2770->i_sense_slot); - -end: if (ret < 0) return ret; @@ -282,36 +279,35 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate) TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_48KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, TAS2770_TDM_CFG_REG0_31_44_1_48KHZ); - if (ret) - goto end; break; case 44100: ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_44_1KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, TAS2770_TDM_CFG_REG0_31_44_1_48KHZ); - if (ret) - goto end; break; case 96000: ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_48KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, @@ -322,8 +318,9 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate) TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_44_1KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, @@ -334,22 +331,22 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate) TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_48KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, TAS2770_TDM_CFG_REG0_31_176_4_192KHZ); - if (ret) - goto end; break; case 17640: ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_SMP_MASK, TAS2770_TDM_CFG_REG0_SMP_44_1KHZ); - if (ret) - goto end; + if (ret < 0) + return ret; + ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG0, TAS2770_TDM_CFG_REG0_31_MASK, @@ -359,7 +356,6 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate) ret = -EINVAL; } -end: if (ret < 0) return ret; -- 2.28.0
next prev parent reply other threads:[~2020-09-18 19:06 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-18 19:05 [PATCH 1/9] ASoC: tas2770: Fix calling reset in probe Dan Murphy 2020-09-18 19:05 ` Dan Murphy 2020-09-18 19:05 ` [PATCH 2/9] ASoC: tas2770: Add missing bias level power states Dan Murphy 2020-09-18 19:05 ` Dan Murphy 2020-09-18 19:05 ` [PATCH 3/9] dt-bindings: tas2770: Fix I2C addresses for the TAS2770 Dan Murphy 2020-09-18 19:05 ` Dan Murphy 2020-09-18 19:05 ` [PATCH 4/9] ASoC: tas2770: Fix required DT properties in the code Dan Murphy 2020-09-18 19:05 ` Dan Murphy 2020-09-18 19:05 ` [PATCH 5/9] ASoC: tas2770: Fix unbalanced calls to pm_runtime Dan Murphy 2020-09-18 19:05 ` Dan Murphy 2020-09-18 19:05 ` [PATCH 6/9] ASoC: tas2770: Convert bit mask to GENMASK in header Dan Murphy 2020-09-18 19:05 ` Dan Murphy 2020-09-21 19:04 ` Mark Brown 2020-09-21 19:04 ` Mark Brown 2020-09-21 19:18 ` Dan Murphy 2020-09-21 19:18 ` Dan Murphy 2020-09-21 19:19 ` Dan Murphy 2020-09-21 19:19 ` Dan Murphy 2020-09-22 9:47 ` Mark Brown 2020-09-22 9:47 ` Mark Brown 2020-09-18 19:05 ` Dan Murphy [this message] 2020-09-18 19:05 ` [PATCH 7/9] ASoC: tas2770: Fix error handling with update_bits Dan Murphy 2020-09-18 19:05 ` [PATCH 8/9] ASoC: tas2770: Fix the spacing and new lines Dan Murphy 2020-09-18 19:05 ` Dan Murphy 2020-09-18 19:05 ` [PATCH 9/9] ASoC: tas2770: Refactor sample rate function Dan Murphy 2020-09-18 19:05 ` Dan Murphy 2020-09-22 0:05 ` [PATCH 1/9] ASoC: tas2770: Fix calling reset in probe Mark Brown 2020-09-22 0:05 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200918190548.12598-7-dmurphy@ti.com \ --to=dmurphy@ti.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.