All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zhen Lei <thunder.leizhen@huawei.com>
To: Rob Herring <robh+dt@kernel.org>, Pavel Machek <pavel@ucw.cz>,
	Dan Murphy <dmurphy@ti.com>,
	linux-leds <linux-leds@vger.kernel.org>,
	Lee Jones <lee.jones@linaro.org>,
	Benson Leung <bleung@chromium.org>,
	"Enric Balletbo i Serra" <enric.balletbo@collabora.com>,
	Guenter Roeck <groeck@chromium.org>,
	Mark Brown <broonie@kernel.org>,
	linux-spi <linux-spi@vger.kernel.org>,
	Lubomir Rintel <lkundrak@v3.sk>,
	devicetree <devicetree@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Subject: [PATCH 0/6] fix all errors except one reported by dt_binding_check
Date: Wed, 14 Oct 2020 00:08:39 +0800	[thread overview]
Message-ID: <20201013160845.1772-1-thunder.leizhen@huawei.com> (raw)

When people add multiple or common YAML files, they usually perform a full
dt_binding_check. Unfortunately, some YAML files cannot pass the self-check.
The errors or warning are listed below. It is necessary to eliminate them,
so that people's time and energy are not wasted every time when execute
comprehensive dt_binding_check.

This error is fixed by Patch 1:
/root/leizhen/linux-next/Documentation/devicetree/bindings/leds/leds-lp55xx.example.dt.yaml: led-controller@33: multi-led@2:color:0:0: 9 is greater than the maximum of 8
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml

These errors are fixed by Patch 2:
/root/leizhen/linux-next/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.example.dt.yaml: ec@0: 'typec' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
/root/leizhen/linux-next/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.example.dt.yaml: cros-ec@0: 'extcon0', 'extcon1' do not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
/root/leizhen/linux-next/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.example.dt.yaml: cros-ec@0: 'ec-pwm' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
/root/leizhen/linux-next/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.example.dt.yaml: ec@0: '#address-cells', '#size-cells', 'regulator@0' do not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
/root/leizhen/linux-next/Documentation/devicetree/bindings/sound/google,cros-ec-codec.example.dt.yaml: cros-ec@0: '#address-cells', '#size-cells', 'ec-codec@10500000' do not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml

These errors are fixed by Patch 3 and 4:
Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.example.dts:21.13-30.11: Warning (spi_bus_bridge): /example-0/spi: incorrect #address-cells for SPI bus
Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.example.dts:21.13-30.11: Warning (spi_bus_bridge): /example-0/spi: incorrect #size-cells for SPI bus
Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'

Patch 5 and 6 fix the dtbs_check errors detected by Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus
  also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus
  also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus
  also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus
  also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
/root/leizhen/linux-next/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: slave: 'cmd-gpios' is a required property
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
/root/leizhen/linux-next/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: slave: 'cmd-gpio' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml

I have no good idea for this one, so leave it.
Documentation/devicetree/bindings/pci/xilinx-versal-cpm.example.dts:43.62-47.30: Warning (pci_device_reg): /example-0/versal/pcie@fca10000/interrupt-controller: missing PCI reg property


Zhen Lei (6):
  dt-bindings: leds: choose correct color value of multi-led
  dt-bindings: mfd: google,cros-ec: explicitly allow additional
    properties
  spi: dt-bindings: spi-controller: explicitly require
    #address-cells=<0> for slave mode
  dt-bindings: misc: explicitly add #address-cells for slave mode
  ARM: dts: mmp2-olpc-xo-1-75: explicitly add #address-cells=<0> for
    slave mode
  dt-bindings: misc: correct the property name cmd-gpios to cmd-gpio

 .../devicetree/bindings/leds/leds-lp55xx.yaml        |  2 +-
 .../devicetree/bindings/mfd/google,cros-ec.yaml      |  2 +-
 .../devicetree/bindings/misc/olpc,xo1.75-ec.yaml     |  8 +++++---
 .../devicetree/bindings/spi/spi-controller.yaml      | 20 ++++++++++++++------
 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts              |  2 +-
 5 files changed, 22 insertions(+), 12 deletions(-)

-- 
1.8.3



WARNING: multiple messages have this Message-ID (diff)
From: Zhen Lei <thunder.leizhen@huawei.com>
To: Rob Herring <robh+dt@kernel.org>, Pavel Machek <pavel@ucw.cz>,
	Dan Murphy <dmurphy@ti.com>,
	linux-leds <linux-leds@vger.kernel.org>,
	Lee Jones <lee.jones@linaro.org>,
	Benson Leung <bleung@chromium.org>,
	"Enric Balletbo i Serra" <enric.balletbo@collabora.com>,
	Guenter Roeck <groeck@chromium.org>,
	 Mark Brown <broonie@kernel.org>,
	linux-spi <linux-spi@vger.kernel.org>,
	Lubomir Rintel <lkundrak@v3.sk>,
	devicetree <devicetree@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Subject: [PATCH 0/6] fix all errors except one reported by dt_binding_check
Date: Wed, 14 Oct 2020 00:08:39 +0800	[thread overview]
Message-ID: <20201013160845.1772-1-thunder.leizhen@huawei.com> (raw)

When people add multiple or common YAML files, they usually perform a full
dt_binding_check. Unfortunately, some YAML files cannot pass the self-check.
The errors or warning are listed below. It is necessary to eliminate them,
so that people's time and energy are not wasted every time when execute
comprehensive dt_binding_check.

This error is fixed by Patch 1:
/root/leizhen/linux-next/Documentation/devicetree/bindings/leds/leds-lp55xx.example.dt.yaml: led-controller@33: multi-led@2:color:0:0: 9 is greater than the maximum of 8
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml

These errors are fixed by Patch 2:
/root/leizhen/linux-next/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.example.dt.yaml: ec@0: 'typec' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
/root/leizhen/linux-next/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.example.dt.yaml: cros-ec@0: 'extcon0', 'extcon1' do not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
/root/leizhen/linux-next/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.example.dt.yaml: cros-ec@0: 'ec-pwm' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
/root/leizhen/linux-next/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.example.dt.yaml: ec@0: '#address-cells', '#size-cells', 'regulator@0' do not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
/root/leizhen/linux-next/Documentation/devicetree/bindings/sound/google,cros-ec-codec.example.dt.yaml: cros-ec@0: '#address-cells', '#size-cells', 'ec-codec@10500000' do not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml

These errors are fixed by Patch 3 and 4:
Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.example.dts:21.13-30.11: Warning (spi_bus_bridge): /example-0/spi: incorrect #address-cells for SPI bus
Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.example.dts:21.13-30.11: Warning (spi_bus_bridge): /example-0/spi: incorrect #size-cells for SPI bus
Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'

Patch 5 and 6 fix the dtbs_check errors detected by Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus
  also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus
  also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus
  also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus
  also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
/root/leizhen/linux-next/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: slave: 'cmd-gpios' is a required property
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
/root/leizhen/linux-next/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: slave: 'cmd-gpio' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: /root/leizhen/linux-next/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml

I have no good idea for this one, so leave it.
Documentation/devicetree/bindings/pci/xilinx-versal-cpm.example.dts:43.62-47.30: Warning (pci_device_reg): /example-0/versal/pcie@fca10000/interrupt-controller: missing PCI reg property


Zhen Lei (6):
  dt-bindings: leds: choose correct color value of multi-led
  dt-bindings: mfd: google,cros-ec: explicitly allow additional
    properties
  spi: dt-bindings: spi-controller: explicitly require
    #address-cells=<0> for slave mode
  dt-bindings: misc: explicitly add #address-cells for slave mode
  ARM: dts: mmp2-olpc-xo-1-75: explicitly add #address-cells=<0> for
    slave mode
  dt-bindings: misc: correct the property name cmd-gpios to cmd-gpio

 .../devicetree/bindings/leds/leds-lp55xx.yaml        |  2 +-
 .../devicetree/bindings/mfd/google,cros-ec.yaml      |  2 +-
 .../devicetree/bindings/misc/olpc,xo1.75-ec.yaml     |  8 +++++---
 .../devicetree/bindings/spi/spi-controller.yaml      | 20 ++++++++++++++------
 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts              |  2 +-
 5 files changed, 22 insertions(+), 12 deletions(-)

-- 
1.8.3



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-10-13 16:09 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-13 16:08 Zhen Lei [this message]
2020-10-13 16:08 ` [PATCH 0/6] fix all errors except one reported by dt_binding_check Zhen Lei
2020-10-13 16:08 ` [PATCH 1/6] dt-bindings: leds: choose correct color value of multi-led Zhen Lei
2020-10-13 16:08   ` Zhen Lei
2020-10-13 16:17   ` Dan Murphy
2020-10-13 16:17     ` Dan Murphy
2020-10-13 17:04     ` Pavel Machek
2020-10-13 17:04       ` Pavel Machek
2020-10-14  1:08     ` Leizhen (ThunderTown)
2020-10-14  1:08       ` Leizhen (ThunderTown)
2020-10-13 16:08 ` [PATCH 2/6] dt-bindings: mfd: google,cros-ec: explicitly allow additional properties Zhen Lei
2020-10-13 16:08   ` [PATCH 2/6] dt-bindings: mfd: google, cros-ec: " Zhen Lei
2020-10-13 17:53   ` [PATCH 2/6] dt-bindings: mfd: google,cros-ec: " Dan Murphy
2020-10-13 17:53     ` Dan Murphy
2020-10-14  1:52     ` Leizhen (ThunderTown)
2020-10-14  1:52       ` Leizhen (ThunderTown)
2020-10-14 13:38   ` Rob Herring
2020-10-14 13:38     ` Rob Herring
2020-10-15  6:55     ` Leizhen (ThunderTown)
2020-10-15  6:55       ` Leizhen (ThunderTown)
2020-10-13 16:08 ` [PATCH 3/6] spi: dt-bindings: spi-controller: explicitly require #address-cells=<0> for slave mode Zhen Lei
2020-10-13 16:08   ` Zhen Lei
2020-10-14 13:41   ` Rob Herring
2020-10-14 13:41     ` Rob Herring
2020-10-13 16:08 ` [PATCH 4/6] dt-bindings: misc: explicitly add #address-cells " Zhen Lei
2020-10-13 16:08   ` Zhen Lei
2020-10-14 13:42   ` Rob Herring
2020-10-14 13:42     ` Rob Herring
2020-10-13 16:08 ` [PATCH 5/6] ARM: dts: mmp2-olpc-xo-1-75: explicitly add #address-cells=<0> " Zhen Lei
2020-10-13 16:08   ` Zhen Lei
2020-10-15  9:56   ` Leizhen (ThunderTown)
2020-10-15  9:56     ` Leizhen (ThunderTown)
2020-12-04  7:48   ` Leizhen (ThunderTown)
2020-12-04  7:48     ` Leizhen (ThunderTown)
2020-10-13 16:08 ` [PATCH 6/6] dt-bindings: misc: correct the property name cmd-gpios to cmd-gpio Zhen Lei
2020-10-13 16:08   ` Zhen Lei
2020-10-13 17:32   ` Dan Murphy
2020-10-13 17:32     ` Dan Murphy
2020-10-14  1:29     ` Leizhen (ThunderTown)
2020-10-14  1:29       ` Leizhen (ThunderTown)
2020-10-14 13:50       ` Rob Herring
2020-10-14 13:50         ` Rob Herring
2020-10-15  3:23         ` Leizhen (ThunderTown)
2020-10-15  3:23           ` Leizhen (ThunderTown)
2020-10-16 14:13           ` Rob Herring
2020-10-16 14:13             ` Rob Herring
2020-10-15  7:12   ` Lubomir Rintel
2020-10-15  7:12     ` Lubomir Rintel
2020-10-15  7:32     ` Leizhen (ThunderTown)
2020-10-15  7:32       ` Leizhen (ThunderTown)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201013160845.1772-1-thunder.leizhen@huawei.com \
    --to=thunder.leizhen@huawei.com \
    --cc=bleung@chromium.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=enric.balletbo@collabora.com \
    --cc=groeck@chromium.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=lkundrak@v3.sk \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.