From: Biwen Li <biwen.li@oss.nxp.com> To: linux@rasmusvillemoes.dk, shawnguo@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, leoyang.li@nxp.com, zhiqiang.hou@nxp.com, tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, jiafei.pan@nxp.com, xiaobo.xie@nxp.com, linux-arm-kernel@lists.infradead.org, Biwen Li <biwen.li@nxp.com> Subject: [v4 09/11] arm64: dts: lx2160a: add DT node for external interrupt lines Date: Mon, 30 Nov 2020 18:15:13 +0800 [thread overview] Message-ID: <20201130101515.27431-9-biwen.li@oss.nxp.com> (raw) In-Reply-To: <20201130101515.27431-1-biwen.li@oss.nxp.com> From: Biwen Li <biwen.li@nxp.com> Add device-tree node for external interrupt lines IRQ0-IRQ11. Signed-off-by: Biwen Li <biwen.li@nxp.com> --- Change in v4: - remove copyright to fix corrupt Change in v3: - none Change in v2: - none .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 83072da6f6c6..36f3c069529c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -664,6 +664,37 @@ little-endian; }; + isc: syscon@1f70000 { + compatible = "fsl,lx2160a-isc", "syscon"; + reg = <0x0 0x1f70000 0x0 0x10000>; + little-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1f70000 0x10000>; + + extirq: interrupt-controller@14 { + compatible = "fsl,lx2160a-extirq", "fsl,ls1088a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x14 4>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Biwen Li <biwen.li@oss.nxp.com> To: linux@rasmusvillemoes.dk, shawnguo@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, leoyang.li@nxp.com, zhiqiang.hou@nxp.com, tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org Cc: Biwen Li <biwen.li@nxp.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, xiaobo.xie@nxp.com, jiafei.pan@nxp.com, linux-arm-kernel@lists.infradead.org Subject: [v4 09/11] arm64: dts: lx2160a: add DT node for external interrupt lines Date: Mon, 30 Nov 2020 18:15:13 +0800 [thread overview] Message-ID: <20201130101515.27431-9-biwen.li@oss.nxp.com> (raw) In-Reply-To: <20201130101515.27431-1-biwen.li@oss.nxp.com> From: Biwen Li <biwen.li@nxp.com> Add device-tree node for external interrupt lines IRQ0-IRQ11. Signed-off-by: Biwen Li <biwen.li@nxp.com> --- Change in v4: - remove copyright to fix corrupt Change in v3: - none Change in v2: - none .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 83072da6f6c6..36f3c069529c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -664,6 +664,37 @@ little-endian; }; + isc: syscon@1f70000 { + compatible = "fsl,lx2160a-isc", "syscon"; + reg = <0x0 0x1f70000 0x0 0x10000>; + little-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1f70000 0x10000>; + + extirq: interrupt-controller@14 { + compatible = "fsl,lx2160a-extirq", "fsl,ls1088a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x14 4>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-30 10:08 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-30 10:15 [v4 01/11] irqchip: ls-extirq: Add LS1043A, LS1088A external interrupt Biwen Li 2020-11-30 10:15 ` Biwen Li 2020-11-30 10:15 ` [v4 02/11] arm64: dts: ls1043a: add DT node for external interrupt lines Biwen Li 2020-11-30 10:15 ` Biwen Li 2021-01-05 1:45 ` Shawn Guo 2021-01-05 1:45 ` Shawn Guo 2020-11-30 10:15 ` [v4 03/11] arm64: dts: ls1046a: " Biwen Li 2020-11-30 10:15 ` Biwen Li 2020-11-30 10:15 ` [v4 04/11] arm64: dts: ls1046ardb: Add interrupt line for RTC node Biwen Li 2020-11-30 10:15 ` Biwen Li 2020-11-30 10:15 ` [v4 05/11] arm64: dts: ls1088a: add DT node for external interrupt lines Biwen Li 2020-11-30 10:15 ` Biwen Li 2020-11-30 10:15 ` [v4 06/11] arm64: dts: ls1088ardb: fix interrupt line for RTC node Biwen Li 2020-11-30 10:15 ` Biwen Li 2020-11-30 10:15 ` [v4 07/11] arm64: dts: ls208xa: add DT node for external interrupt lines Biwen Li 2020-11-30 10:15 ` Biwen Li 2020-11-30 10:15 ` [v4 08/11] arm64: dts: ls208xa-rdb: add interrupt line for RTC node Biwen Li 2020-11-30 10:15 ` Biwen Li 2020-11-30 10:15 ` Biwen Li [this message] 2020-11-30 10:15 ` [v4 09/11] arm64: dts: lx2160a: add DT node for external interrupt lines Biwen Li 2020-11-30 10:15 ` [v4 10/11] arm64: dts: lx2160ardb: fix interrupt line for RTC node Biwen Li 2020-11-30 10:15 ` Biwen Li 2020-11-30 10:15 ` [v4 11/11] dt-bindings: interrupt-controller: update bindings for supporting more SoCs Biwen Li 2020-11-30 10:15 ` Biwen Li 2020-12-01 2:09 ` Rob Herring 2020-12-01 2:09 ` Rob Herring 2020-12-11 14:58 ` [irqchip: irq/irqchip-next] " irqchip-bot for Biwen Li 2020-12-11 14:58 ` [irqchip: irq/irqchip-next] irqchip/ls-extirq: Add LS1043A, LS1088A external interrupt support irqchip-bot for Hou Zhiqiang 2020-12-11 15:01 ` [v4 01/11] irqchip: ls-extirq: Add LS1043A, LS1088A external interrupt Marc Zyngier 2020-12-11 15:01 ` Marc Zyngier
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201130101515.27431-9-biwen.li@oss.nxp.com \ --to=biwen.li@oss.nxp.com \ --cc=biwen.li@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=jason@lakedaemon.net \ --cc=jiafei.pan@nxp.com \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@rasmusvillemoes.dk \ --cc=mark.rutland@arm.com \ --cc=maz@kernel.org \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=tglx@linutronix.de \ --cc=xiaobo.xie@nxp.com \ --cc=zhiqiang.hou@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.