All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bard Liao <yung-chuan.liao@linux.intel.com>
To: alsa-devel@alsa-project.org, vkoul@kernel.org
Cc: vinod.koul@linaro.org, linux-kernel@vger.kernel.org,
	gregkh@linuxfoundation.org, jank@cadence.com,
	srinivas.kandagatla@linaro.org, rander.wang@linux.intel.com,
	ranjani.sridharan@linux.intel.com, hui.wang@canonical.com,
	pierre-louis.bossart@linux.intel.com, sanyog.r.kale@intel.com,
	bard.liao@intel.com
Subject: [PATCH 3/3] soundwire: bus: clear parity interrupt before the mask is enabled
Date: Tue, 26 Jan 2021 16:37:46 +0800	[thread overview]
Message-ID: <20210126083746.3238-4-yung-chuan.liao@linux.intel.com> (raw)
In-Reply-To: <20210126083746.3238-1-yung-chuan.liao@linux.intel.com>

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

We recently added the ability to discard bus clash interrupts reported
on startup. These bus clash interrupts can happen randomly on some
platforms and don't seem to be valid. A master-level quirk helped
squelch those spurious errors.

Additional tests on a new platform with the Maxim 98373 amplifier
showed a rare case where the parity interrupt is also thrown on
startup, at the same time as bus clashes. This issue only seems to
happen infrequently and was only observed during suspend-resume stress
tests while audio is streaming. We could make the problem go away by
adding a Slave-level quirk, but there is no evidence that the issue is
actually a Slave problem: the parity is provided by the Master, which
could also set an invalid parity in corner cases.

This patch suggests an additional bus-level quirk for parity, which is
only applied when the codec device is not known to have an issue with
parity. The initial parity error will be ignored, but a trace will be
logged to help identify potential root causes (likely a combination of
issues on both master and slave sides influenced by board-specific
electrical parameters).

BugLink: https://github.com/thesofproject/linux/issues/2533
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
 drivers/soundwire/bus.c       | 9 +++++++++
 drivers/soundwire/intel.c     | 3 ++-
 include/linux/soundwire/sdw.h | 1 +
 3 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index d394905936e4..57581fdb2ea9 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -1256,6 +1256,15 @@ static int sdw_initialize_slave(struct sdw_slave *slave)
 			sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_BUS_CLASH);
 		}
 	}
+	if ((slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY) &&
+	    !(slave->prop.quirks & SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY)) {
+		/* Clear parity interrupt before enabling interrupt mask */
+		status = sdw_read_no_pm(slave, SDW_SCP_INT1);
+		if (status & SDW_SCP_INT1_PARITY) {
+			dev_warn(&slave->dev, "PARITY error detected before INT mask is enabled\n");
+			sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_PARITY);
+		}
+	}
 
 	/*
 	 * Set SCP_INT1_MASK register, typically bus clash and
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index f7ba1a77a1df..c1fdc85d0a74 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -1286,7 +1286,8 @@ static int sdw_master_read_intel_prop(struct sdw_bus *bus)
 	if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE)
 		prop->hw_disabled = true;
 
-	prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH;
+	prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH |
+		SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY;
 
 	return 0;
 }
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index a2766c3b603d..30415354d419 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -426,6 +426,7 @@ struct sdw_master_prop {
 };
 
 #define SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH	BIT(0)
+#define SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY	BIT(1)
 
 int sdw_master_read_prop(struct sdw_bus *bus);
 int sdw_slave_read_prop(struct sdw_slave *slave);
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Bard Liao <yung-chuan.liao@linux.intel.com>
To: alsa-devel@alsa-project.org, vkoul@kernel.org
Cc: pierre-louis.bossart@linux.intel.com, vinod.koul@linaro.org,
	gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
	ranjani.sridharan@linux.intel.com, hui.wang@canonical.com,
	srinivas.kandagatla@linaro.org, jank@cadence.com,
	sanyog.r.kale@intel.com, rander.wang@linux.intel.com,
	bard.liao@intel.com
Subject: [PATCH 3/3] soundwire: bus: clear parity interrupt before the mask is enabled
Date: Tue, 26 Jan 2021 16:37:46 +0800	[thread overview]
Message-ID: <20210126083746.3238-4-yung-chuan.liao@linux.intel.com> (raw)
In-Reply-To: <20210126083746.3238-1-yung-chuan.liao@linux.intel.com>

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

We recently added the ability to discard bus clash interrupts reported
on startup. These bus clash interrupts can happen randomly on some
platforms and don't seem to be valid. A master-level quirk helped
squelch those spurious errors.

Additional tests on a new platform with the Maxim 98373 amplifier
showed a rare case where the parity interrupt is also thrown on
startup, at the same time as bus clashes. This issue only seems to
happen infrequently and was only observed during suspend-resume stress
tests while audio is streaming. We could make the problem go away by
adding a Slave-level quirk, but there is no evidence that the issue is
actually a Slave problem: the parity is provided by the Master, which
could also set an invalid parity in corner cases.

This patch suggests an additional bus-level quirk for parity, which is
only applied when the codec device is not known to have an issue with
parity. The initial parity error will be ignored, but a trace will be
logged to help identify potential root causes (likely a combination of
issues on both master and slave sides influenced by board-specific
electrical parameters).

BugLink: https://github.com/thesofproject/linux/issues/2533
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
 drivers/soundwire/bus.c       | 9 +++++++++
 drivers/soundwire/intel.c     | 3 ++-
 include/linux/soundwire/sdw.h | 1 +
 3 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index d394905936e4..57581fdb2ea9 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -1256,6 +1256,15 @@ static int sdw_initialize_slave(struct sdw_slave *slave)
 			sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_BUS_CLASH);
 		}
 	}
+	if ((slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY) &&
+	    !(slave->prop.quirks & SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY)) {
+		/* Clear parity interrupt before enabling interrupt mask */
+		status = sdw_read_no_pm(slave, SDW_SCP_INT1);
+		if (status & SDW_SCP_INT1_PARITY) {
+			dev_warn(&slave->dev, "PARITY error detected before INT mask is enabled\n");
+			sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_PARITY);
+		}
+	}
 
 	/*
 	 * Set SCP_INT1_MASK register, typically bus clash and
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index f7ba1a77a1df..c1fdc85d0a74 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -1286,7 +1286,8 @@ static int sdw_master_read_intel_prop(struct sdw_bus *bus)
 	if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE)
 		prop->hw_disabled = true;
 
-	prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH;
+	prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH |
+		SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY;
 
 	return 0;
 }
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index a2766c3b603d..30415354d419 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -426,6 +426,7 @@ struct sdw_master_prop {
 };
 
 #define SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH	BIT(0)
+#define SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY	BIT(1)
 
 int sdw_master_read_prop(struct sdw_bus *bus);
 int sdw_slave_read_prop(struct sdw_slave *slave);
-- 
2.17.1


  parent reply	other threads:[~2021-01-26 11:21 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-26  8:37 [PATCH 0/3] soundwire: clear bus clash/parity interrupt before the mask is enabled Bard Liao
2021-01-26  8:37 ` Bard Liao
2021-01-26  8:37 ` [PATCH 1/3] soundwire: bus: clear bus clash " Bard Liao
2021-01-26  8:37   ` Bard Liao
2021-02-01 10:28   ` Vinod Koul
2021-02-01 10:28     ` Vinod Koul
2021-02-01 10:38     ` Vinod Koul
2021-02-01 10:38       ` Vinod Koul
2021-02-01 16:18       ` Pierre-Louis Bossart
2021-02-02  4:39         ` Vinod Koul
2021-02-02  4:39           ` Vinod Koul
2021-02-02 16:52           ` Pierre-Louis Bossart
2021-02-02 16:52             ` Pierre-Louis Bossart
2021-02-03 11:03             ` Vinod Koul
2021-02-03 11:03               ` Vinod Koul
2021-01-26  8:37 ` [PATCH 2/3] soundwire: intel: add SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH quirk Bard Liao
2021-01-26  8:37   ` Bard Liao
2021-02-01 10:42   ` Vinod Koul
2021-02-01 10:42     ` Vinod Koul
2021-02-01 16:20     ` Pierre-Louis Bossart
2021-02-02  4:41       ` Vinod Koul
2021-02-02  4:41         ` Vinod Koul
2021-02-02 16:53         ` Pierre-Louis Bossart
2021-01-26  8:37 ` Bard Liao [this message]
2021-01-26  8:37   ` [PATCH 3/3] soundwire: bus: clear parity interrupt before the mask is enabled Bard Liao
2021-02-01 11:09   ` Vinod Koul
2021-02-01 11:09     ` Vinod Koul
2021-02-01 16:29     ` Pierre-Louis Bossart
2021-02-01 16:29       ` Pierre-Louis Bossart
2021-02-02  4:44       ` Vinod Koul
2021-02-02  4:44         ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210126083746.3238-4-yung-chuan.liao@linux.intel.com \
    --to=yung-chuan.liao@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bard.liao@intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hui.wang@canonical.com \
    --cc=jank@cadence.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=rander.wang@linux.intel.com \
    --cc=ranjani.sridharan@linux.intel.com \
    --cc=sanyog.r.kale@intel.com \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=vinod.koul@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.