All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicola Mazzucato <nicola.mazzucato@arm.com>
To: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	sudeep.holla@arm.com, rjw@rjwysocki.net, vireshk@kernel.org,
	cristian.marussi@arm.com
Cc: morten.rasmussen@arm.com, chris.redpath@arm.com,
	ionela.voinescu@arm.com, nicola.mazzucato@arm.com
Subject: [PATCH v7 2/3] scmi-cpufreq: Get opp_shared_cpus from opp-v2 for EM
Date: Mon, 15 Feb 2021 07:51:38 +0000	[thread overview]
Message-ID: <20210215075139.30772-3-nicola.mazzucato@arm.com> (raw)
In-Reply-To: <20210215075139.30772-1-nicola.mazzucato@arm.com>

By design, SCMI performance domains define the granularity of
performance controls, they do not describe any underlying hardware
dependencies (although they may match in many cases).

It is therefore possible to have some platforms where hardware may have
the ability to control CPU performance at different granularity and choose
to describe fine-grained performance control through SCMI.

In such situations, the energy model would be provided with inaccurate
information based on controls, while it still needs to know the
performance boundaries.

To restore correct functionality, retrieve information of CPUs under the
same performance domain from operating-points-v2 in DT, and pass it on to
EM.

Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
---
 drivers/cpufreq/scmi-cpufreq.c | 72 ++++++++++++++++++++++++----------
 1 file changed, 52 insertions(+), 20 deletions(-)

diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 34bf2eb8d465..fc9866511f01 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -126,6 +126,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	struct scmi_data *priv;
 	struct cpufreq_frequency_table *freq_table;
 	struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power);
+	cpumask_var_t opp_shared_cpus;
 	bool power_scale_mw;
 
 	cpu_dev = get_cpu_device(policy->cpu);
@@ -134,32 +135,62 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 		return -ENODEV;
 	}
 
-	ret = handle->perf_ops->device_opps_add(handle, cpu_dev);
-	if (ret) {
-		dev_warn(cpu_dev, "failed to add opps to the device\n");
-		return ret;
-	}
+	if (!zalloc_cpumask_var(&opp_shared_cpus, GFP_KERNEL))
+		ret = -ENOMEM;
 
+	/* Obtain CPUs that share SCMI performance controls */
 	ret = scmi_get_sharing_cpus(cpu_dev, policy->cpus);
 	if (ret) {
 		dev_warn(cpu_dev, "failed to get sharing cpumask\n");
-		return ret;
+		goto out_free_cpumask;
 	}
 
-	ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
-	if (ret) {
-		dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
-			__func__, ret);
-		return ret;
+	/*
+	 * Obtain CPUs that share performance levels.
+	 * The OPP 'sharing cpus' info may come from DT through an empty opp
+	 * table and opp-shared.
+	 */
+	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, opp_shared_cpus);
+	if (ret || !cpumask_weight(opp_shared_cpus)) {
+		/*
+		 * Either opp-table is not set or no opp-shared was found.
+		 * Use the CPU mask from SCMI to designate CPUs sharing an OPP
+		 * table.
+		 */
+		cpumask_copy(opp_shared_cpus, policy->cpus);
 	}
 
+	/*
+	 * Add OPPs only on those CPUs for which we haven't already done so.
+	 */
 	nr_opp = dev_pm_opp_get_opp_count(cpu_dev);
 	if (nr_opp <= 0) {
-		dev_err(cpu_dev, "%s: No OPPs for this device: %d\n",
-			__func__, ret);
-
-		ret = -ENODEV;
-		goto out_free_priv;
+		ret = handle->perf_ops->device_opps_add(handle, cpu_dev);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to add opps to the device\n");
+			goto out_free_cpumask;
+		}
+
+		nr_opp = dev_pm_opp_get_opp_count(cpu_dev);
+		if (nr_opp <= 0) {
+			dev_err(cpu_dev, "%s: No OPPs for this device: %d\n",
+				__func__, ret);
+
+			ret = -ENODEV;
+			goto out_free_opp;
+		}
+
+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev, opp_shared_cpus);
+		if (ret) {
+			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+				__func__, ret);
+
+			goto out_free_opp;
+		}
+
+		power_scale_mw = handle->perf_ops->power_scale_mw_get(handle);
+		em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb,
+					    opp_shared_cpus, power_scale_mw);
 	}
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -192,17 +223,18 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	policy->fast_switch_possible =
 		handle->perf_ops->fast_switch_possible(handle, cpu_dev);
 
-	power_scale_mw = handle->perf_ops->power_scale_mw_get(handle);
-	em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus,
-				    power_scale_mw);
-
+	free_cpumask_var(opp_shared_cpus);
 	return 0;
 
 out_free_priv:
 	kfree(priv);
+
 out_free_opp:
 	dev_pm_opp_remove_all_dynamic(cpu_dev);
 
+out_free_cpumask:
+	free_cpumask_var(opp_shared_cpus);
+
 	return ret;
 }
 
-- 
2.27.0


WARNING: multiple messages have this Message-ID (diff)
From: Nicola Mazzucato <nicola.mazzucato@arm.com>
To: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	sudeep.holla@arm.com, rjw@rjwysocki.net, vireshk@kernel.org,
	cristian.marussi@arm.com
Cc: chris.redpath@arm.com, ionela.voinescu@arm.com,
	morten.rasmussen@arm.com, nicola.mazzucato@arm.com
Subject: [PATCH v7 2/3] scmi-cpufreq: Get opp_shared_cpus from opp-v2 for EM
Date: Mon, 15 Feb 2021 07:51:38 +0000	[thread overview]
Message-ID: <20210215075139.30772-3-nicola.mazzucato@arm.com> (raw)
In-Reply-To: <20210215075139.30772-1-nicola.mazzucato@arm.com>

By design, SCMI performance domains define the granularity of
performance controls, they do not describe any underlying hardware
dependencies (although they may match in many cases).

It is therefore possible to have some platforms where hardware may have
the ability to control CPU performance at different granularity and choose
to describe fine-grained performance control through SCMI.

In such situations, the energy model would be provided with inaccurate
information based on controls, while it still needs to know the
performance boundaries.

To restore correct functionality, retrieve information of CPUs under the
same performance domain from operating-points-v2 in DT, and pass it on to
EM.

Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
---
 drivers/cpufreq/scmi-cpufreq.c | 72 ++++++++++++++++++++++++----------
 1 file changed, 52 insertions(+), 20 deletions(-)

diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 34bf2eb8d465..fc9866511f01 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -126,6 +126,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	struct scmi_data *priv;
 	struct cpufreq_frequency_table *freq_table;
 	struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power);
+	cpumask_var_t opp_shared_cpus;
 	bool power_scale_mw;
 
 	cpu_dev = get_cpu_device(policy->cpu);
@@ -134,32 +135,62 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 		return -ENODEV;
 	}
 
-	ret = handle->perf_ops->device_opps_add(handle, cpu_dev);
-	if (ret) {
-		dev_warn(cpu_dev, "failed to add opps to the device\n");
-		return ret;
-	}
+	if (!zalloc_cpumask_var(&opp_shared_cpus, GFP_KERNEL))
+		ret = -ENOMEM;
 
+	/* Obtain CPUs that share SCMI performance controls */
 	ret = scmi_get_sharing_cpus(cpu_dev, policy->cpus);
 	if (ret) {
 		dev_warn(cpu_dev, "failed to get sharing cpumask\n");
-		return ret;
+		goto out_free_cpumask;
 	}
 
-	ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
-	if (ret) {
-		dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
-			__func__, ret);
-		return ret;
+	/*
+	 * Obtain CPUs that share performance levels.
+	 * The OPP 'sharing cpus' info may come from DT through an empty opp
+	 * table and opp-shared.
+	 */
+	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, opp_shared_cpus);
+	if (ret || !cpumask_weight(opp_shared_cpus)) {
+		/*
+		 * Either opp-table is not set or no opp-shared was found.
+		 * Use the CPU mask from SCMI to designate CPUs sharing an OPP
+		 * table.
+		 */
+		cpumask_copy(opp_shared_cpus, policy->cpus);
 	}
 
+	/*
+	 * Add OPPs only on those CPUs for which we haven't already done so.
+	 */
 	nr_opp = dev_pm_opp_get_opp_count(cpu_dev);
 	if (nr_opp <= 0) {
-		dev_err(cpu_dev, "%s: No OPPs for this device: %d\n",
-			__func__, ret);
-
-		ret = -ENODEV;
-		goto out_free_priv;
+		ret = handle->perf_ops->device_opps_add(handle, cpu_dev);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to add opps to the device\n");
+			goto out_free_cpumask;
+		}
+
+		nr_opp = dev_pm_opp_get_opp_count(cpu_dev);
+		if (nr_opp <= 0) {
+			dev_err(cpu_dev, "%s: No OPPs for this device: %d\n",
+				__func__, ret);
+
+			ret = -ENODEV;
+			goto out_free_opp;
+		}
+
+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev, opp_shared_cpus);
+		if (ret) {
+			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+				__func__, ret);
+
+			goto out_free_opp;
+		}
+
+		power_scale_mw = handle->perf_ops->power_scale_mw_get(handle);
+		em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb,
+					    opp_shared_cpus, power_scale_mw);
 	}
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -192,17 +223,18 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	policy->fast_switch_possible =
 		handle->perf_ops->fast_switch_possible(handle, cpu_dev);
 
-	power_scale_mw = handle->perf_ops->power_scale_mw_get(handle);
-	em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus,
-				    power_scale_mw);
-
+	free_cpumask_var(opp_shared_cpus);
 	return 0;
 
 out_free_priv:
 	kfree(priv);
+
 out_free_opp:
 	dev_pm_opp_remove_all_dynamic(cpu_dev);
 
+out_free_cpumask:
+	free_cpumask_var(opp_shared_cpus);
+
 	return ret;
 }
 
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-02-15  7:50 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-15  7:51 [PATCH v7 0/3] CPUFreq: Add support for opp-sharing cpus Nicola Mazzucato
2021-02-15  7:51 ` Nicola Mazzucato
2021-02-15  7:51 ` [PATCH v7 1/3] scmi-cpufreq: Remove deferred probe Nicola Mazzucato
2021-02-15  7:51   ` Nicola Mazzucato
2021-02-18 10:35   ` Viresh Kumar
2021-02-18 10:35     ` Viresh Kumar
2021-02-18 13:01     ` Nicola Mazzucato
2021-02-18 13:01       ` Nicola Mazzucato
2021-02-15  7:51 ` Nicola Mazzucato [this message]
2021-02-15  7:51   ` [PATCH v7 2/3] scmi-cpufreq: Get opp_shared_cpus from opp-v2 for EM Nicola Mazzucato
2021-02-18 11:00   ` Viresh Kumar
2021-02-18 11:00     ` Viresh Kumar
2021-02-18 13:02     ` Nicola Mazzucato
2021-02-18 13:02       ` Nicola Mazzucato
2021-02-15  7:51 ` [PATCH v7 3/3] cpufreq: blacklist Arm Vexpress platforms in cpufreq-dt-platdev Nicola Mazzucato
2021-02-15  7:51   ` Nicola Mazzucato

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210215075139.30772-3-nicola.mazzucato@arm.com \
    --to=nicola.mazzucato@arm.com \
    --cc=chris.redpath@arm.com \
    --cc=cristian.marussi@arm.com \
    --cc=ionela.voinescu@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=morten.rasmussen@arm.com \
    --cc=rjw@rjwysocki.net \
    --cc=sudeep.holla@arm.com \
    --cc=vireshk@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.