[PATCH v5 01/16] dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW

From: Yong Wu <yong.wu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Joerg Roedel <joro@8bytes.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>
Cc: Evan Green <evgreen@chromium.org>,
	Robin Murphy <robin.murphy@arm.com>,
	Tomasz Figa <tfiga@chromium.org>,
	Will Deacon <will.deacon@arm.com>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<iommu@lists.linux-foundation.org>, <yong.wu@mediatek.com>,
	<youlin.pei@mediatek.com>,
	Nicolas Boichat <drinkcat@chromium.org>,
	Matthias Kaehlcke <mka@chromium.org>, <anan.sun@mediatek.com>,
	<chao.hao@mediatek.com>, <ming-fan.chen@mediatek.com>,
	<yi.kuo@mediatek.com>, <eizan@chromium.org>,
	<acourbot@chromium.org>
Subject: [PATCH v5 01/16] dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
Date: Sat, 10 Apr 2021 17:11:13 +0800	[thread overview]
Message-ID: <20210410091128.31823-2-yong.wu@mediatek.com> (raw)
In-Reply-To: <20210410091128.31823-1-yong.wu@mediatek.com>

After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.

And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 .../bindings/display/mediatek/mediatek,disp.txt          | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-decoder.txt  | 4 ----
 .../devicetree/bindings/media/mediatek-jpeg-encoder.txt  | 4 ----
 Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
 .../devicetree/bindings/media/mediatek-vcodec.txt        | 4 ----
 5 files changed, 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index 93b160df3eec..6336bae8a6d7 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -61,8 +61,6 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
   the supported chips are mt2701, mt8167 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
@@ -91,7 +89,6 @@ ovl0: ovl@1400c000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL0>;
 	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
 };
 
 ovl1: ovl@1400d000 {
@@ -101,7 +98,6 @@ ovl1: ovl@1400d000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL1>;
 	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma0: rdma@1400e000 {
@@ -111,7 +107,6 @@ rdma0: rdma@1400e000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
 	mediatek,rdma-fifosize = <8192>;
 };
 
@@ -122,7 +117,6 @@ rdma1: rdma@1400f000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma2: rdma@14010000 {
@@ -132,7 +126,6 @@ rdma2: rdma@14010000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
 };
 
 wdma0: wdma@14011000 {
@@ -142,7 +135,6 @@ wdma0: wdma@14011000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
 };
 
 wdma1: wdma@14012000 {
@@ -152,7 +144,6 @@ wdma1: wdma@14012000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
index cf60c5acc0e4..7978f210e3d4 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
@@ -15,9 +15,6 @@ Required properties:
 - clock-names: must contain "jpgdec-smi" and "jpgdec".
 - power-domains: a phandle to the power domain, see
   Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
@@ -32,7 +29,6 @@ Example:
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
index acfb50375b8a..4b3664987362 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
@@ -13,9 +13,6 @@ Required properties:
 - clock-names: must contain "jpgenc". It is the clock of JPEG encoder.
 - power-domains: a phandle to the power domain, see
   Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current SoCs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
@@ -29,7 +26,6 @@ Example:
 		clocks =  <&imgsys CLK_IMG_VENC>;
 		clock-names = "jpgenc";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index f4798d04e925..df69c5a06250 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
 
 Example:
 	mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
 		mediatek,vpu = <&vpu>;
 	};
 
@@ -51,7 +47,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
 	};
 
 	mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WDMA>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT0>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT1>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 8318f0ed492d..ad7ba4bf23fe 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -12,7 +12,6 @@ Required properties:
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
 - clocks : list of clock specifiers, corresponding to entries in
   the clock-names property.
 - clock-names: avc encoder must contain "venc_sel", vp8 encoder must
@@ -44,7 +43,6 @@ vcodec_dec: vcodec@16000000 {
           <0 0x16027800 0 0x800>,   /*VP8_VL*/
           <0 0x16028400 0 0x400>;   /*VP9_VD*/
     interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
     iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
              <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
              <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -97,7 +95,6 @@ vcodec_enc_avc: vcodec@18002000 {
              <&iommu M4U_PORT_VENC_REF_CHROMA>,
              <&iommu M4U_PORT_VENC_NBM_RDMA>,
              <&iommu M4U_PORT_VENC_NBM_WDMA>;
-    mediatek,larb = <&larb3>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_SEL>;
     clock-names = "venc_sel";
@@ -118,7 +115,6 @@ vcodec_enc_vp8: vcodec@19002000 {
              <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
              <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
              <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-    mediatek,larb = <&larb5>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
     clock-names = "venc_lt_sel";
-- 
2.18.0

