From: Rob Herring <robh@kernel.org> To: Eugen Hristev <eugen.hristev@microchip.com> Cc: devicetree@vger.kernel.org, linux-media@vger.kernel.org, jacopo@jmondi.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v4 30/33] dt-bindings: media: add microchip,xisc device bindings Date: Thu, 15 Apr 2021 11:40:11 -0500 [thread overview] Message-ID: <20210415164011.GA1533489@robh.at.kernel.org> (raw) In-Reply-To: <20210415085846.824796-1-eugen.hristev@microchip.com> On Thu, Apr 15, 2021 at 11:58:46AM +0300, Eugen Hristev wrote: > Add bindings for the Microchip eXtended Image Sensor Controller. > Based on the atmel,isc.yaml binding. > > Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> > --- > .../bindings/media/microchip,xisc.yaml | 129 ++++++++++++++++++ > 1 file changed, 129 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/microchip,xisc.yaml > > diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml > new file mode 100644 > index 000000000000..c829fa3d2e0e > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml > @@ -0,0 +1,129 @@ > +# SPDX-License-Identifier: GPL-2.0-only Dual license still missing. > +# Copyright (C) 2021 Microchip Technology, Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/microchip,xisc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip eXtended Image Sensor Controller (XISC) > + > +maintainers: > + - Eugen Hristev <eugen.hristev@microchip.com> > + > +description: | > + The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the > + Microchip AT91 SAM family of devices. > + > + The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video. > + The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a > + parallel sensor. > + > + The XISC provides one clock output that is used to clock the demuxer/bridge. > + > +properties: > + compatible: > + const: microchip,sama7g5-isc > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: hclock > + > + '#clock-cells': > + const: 0 > + > + clock-output-names: > + const: isc-mck > + > + microchip,mipi-mode: > + type: boolean > + description: > + As the XISC is usually connected to a demux/bridge, the XISC receives > + the same type of input, however, it should be aware of the type of > + signals received. The mipi-mode enables different internal handling > + of the data and clock lines. > + > + port: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Input port node, single endpoint describing the input pad. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + > + properties: > + bus-type: > + enum: [5, 6] > + > + remote-endpoint: true > + > + bus-width: > + enum: [8, 9, 10, 11, 12] > + default: 12 > + > + hsync-active: > + enum: [0, 1] > + default: 1 > + > + vsync-active: > + enum: [0, 1] > + default: 1 > + > + pclk-sample: > + enum: [0, 1] > + default: 1 > + > + required: > + - remote-endpoint > + - bus-type > + > + additionalProperties: false > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - '#clock-cells' > + - clock-output-names > + - port > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/at91.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + xisc: xisc@e1408000 { > + compatible = "microchip,sama7g5-isc"; > + reg = <0xe1408000 0x2000>; > + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; > + clock-names = "hclock"; > + #clock-cells = <0>; > + clock-output-names = "isc-mck"; > + > + port { > + xisc_in: endpoint { > + bus-type = <5>; /* Parallel */ > + remote-endpoint = <&csi2dc_out>; > + hsync-active = <1>; > + vsync-active = <1>; > + bus-width = <12>; > + }; > + }; > + }; > + > -- > 2.25.1 >
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org> To: Eugen Hristev <eugen.hristev@microchip.com> Cc: devicetree@vger.kernel.org, linux-media@vger.kernel.org, jacopo@jmondi.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v4 30/33] dt-bindings: media: add microchip,xisc device bindings Date: Thu, 15 Apr 2021 11:40:11 -0500 [thread overview] Message-ID: <20210415164011.GA1533489@robh.at.kernel.org> (raw) In-Reply-To: <20210415085846.824796-1-eugen.hristev@microchip.com> On Thu, Apr 15, 2021 at 11:58:46AM +0300, Eugen Hristev wrote: > Add bindings for the Microchip eXtended Image Sensor Controller. > Based on the atmel,isc.yaml binding. > > Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> > --- > .../bindings/media/microchip,xisc.yaml | 129 ++++++++++++++++++ > 1 file changed, 129 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/microchip,xisc.yaml > > diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml > new file mode 100644 > index 000000000000..c829fa3d2e0e > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml > @@ -0,0 +1,129 @@ > +# SPDX-License-Identifier: GPL-2.0-only Dual license still missing. > +# Copyright (C) 2021 Microchip Technology, Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/microchip,xisc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip eXtended Image Sensor Controller (XISC) > + > +maintainers: > + - Eugen Hristev <eugen.hristev@microchip.com> > + > +description: | > + The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the > + Microchip AT91 SAM family of devices. > + > + The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video. > + The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a > + parallel sensor. > + > + The XISC provides one clock output that is used to clock the demuxer/bridge. > + > +properties: > + compatible: > + const: microchip,sama7g5-isc > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: hclock > + > + '#clock-cells': > + const: 0 > + > + clock-output-names: > + const: isc-mck > + > + microchip,mipi-mode: > + type: boolean > + description: > + As the XISC is usually connected to a demux/bridge, the XISC receives > + the same type of input, however, it should be aware of the type of > + signals received. The mipi-mode enables different internal handling > + of the data and clock lines. > + > + port: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Input port node, single endpoint describing the input pad. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + > + properties: > + bus-type: > + enum: [5, 6] > + > + remote-endpoint: true > + > + bus-width: > + enum: [8, 9, 10, 11, 12] > + default: 12 > + > + hsync-active: > + enum: [0, 1] > + default: 1 > + > + vsync-active: > + enum: [0, 1] > + default: 1 > + > + pclk-sample: > + enum: [0, 1] > + default: 1 > + > + required: > + - remote-endpoint > + - bus-type > + > + additionalProperties: false > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - '#clock-cells' > + - clock-output-names > + - port > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/at91.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + xisc: xisc@e1408000 { > + compatible = "microchip,sama7g5-isc"; > + reg = <0xe1408000 0x2000>; > + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; > + clock-names = "hclock"; > + #clock-cells = <0>; > + clock-output-names = "isc-mck"; > + > + port { > + xisc_in: endpoint { > + bus-type = <5>; /* Parallel */ > + remote-endpoint = <&csi2dc_out>; > + hsync-active = <1>; > + vsync-active = <1>; > + bus-width = <12>; > + }; > + }; > + }; > + > -- > 2.25.1 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-04-15 16:40 UTC|newest] Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-04-13 10:56 [PATCH v3 00/33] media: atmel: atmel-isc: add support for xisc Eugen Hristev 2021-04-13 10:56 ` Eugen Hristev 2021-04-13 10:56 ` [PATCH v3 01/33] media: atmel: atmel-isc: specialize gamma table into product specific Eugen Hristev 2021-04-13 10:56 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 02/33] media: atmel: atmel-isc: specialize driver name constant Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 03/33] media: atmel: atmel-isc: add checks for limiting frame sizes Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 04/33] media: atmel: atmel-isc: specialize max width and max height Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 05/33] media: atmel: atmel-isc: specialize dma cfg Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 06/33] media: atmel: atmel-isc: extract CSC submodule config into separate function Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 07/33] media: atmel: atmel-isc-base: add id to clock debug message Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 08/33] media: atmel: atmel-isc: create register offsets struct Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 09/33] media: atmel: atmel-isc: extract CBC submodule config into separate function Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 10/33] media: atmel: atmel-isc: add CBC to the reg offsets struct Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 11/33] media: atmel: atmel-isc: add SUB422 and SUB420 to register offsets Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 12/33] media: atmel: atmel-isc: add RLP " Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 13/33] media: atmel: atmel-isc: add HIS " Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 14/33] media: atmel: atmel-isc: add DMA " Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 15/33] media: atmel: atmel-isc: add support for version register Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 16/33] media: atmel: atmel-isc: add his_entry to register offsets Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 17/33] media: atmel: atmel-isc: add register description for additional modules Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 18/33] media: atmel: atmel-isc: extend pipeline with extra modules Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 19/33] media: atmel: atmel-isc: add CC initialization function Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 20/33] media: atmel: atmel-isc: create product specific v4l2 controls config Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 21/33] media: atmel: atmel-isc: create callback for DPC submodule product specific Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 22/33] media: atmel: atmel-isc: create callback for GAM " Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 23/33] media: atmel: atmel-isc: create callback for RLP " Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 24/33] media: atmel: atmel-isc: move the formats list into product specific code Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 25/33] media: atmel: atmel-isc: create an adapt pipeline callback for product specific Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 26/33] media: atmel: atmel-isc-regs: add additional fields for sama7g5 type pipeline Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 27/33] media: atmel: atmel-isc-base: add support for more formats and additional pipeline modules Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 28/33] media: atmel: atmel-isc-sama5d2: remove duplicate define Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 29/33] dt-bindings: media: atmel-isc: convert to yaml Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 16:32 ` Rob Herring 2021-04-13 16:32 ` Rob Herring 2021-04-15 8:55 ` [PATCH v4 " Eugen Hristev 2021-04-15 8:55 ` Eugen Hristev 2021-04-15 16:16 ` Rob Herring 2021-04-15 16:16 ` Rob Herring 2021-04-13 10:57 ` [PATCH v3 30/33] dt-bindings: media: add microchip,xisc device bindings Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 30/33] dt-bindings: media: add microchip, xisc " Eugen Hristev 2021-04-13 16:34 ` [PATCH v3 30/33] dt-bindings: media: add microchip,xisc " Rob Herring 2021-04-13 16:34 ` Rob Herring 2021-04-15 8:58 ` [PATCH v4 " Eugen Hristev 2021-04-15 8:58 ` [PATCH v4 30/33] dt-bindings: media: add microchip, xisc " Eugen Hristev 2021-04-15 16:40 ` Rob Herring [this message] 2021-04-15 16:40 ` [PATCH v4 30/33] dt-bindings: media: add microchip,xisc " Rob Herring 2021-04-15 18:45 ` [PATCH v5 " Eugen Hristev 2021-04-15 18:45 ` [PATCH v5 30/33] dt-bindings: media: add microchip, xisc " Eugen Hristev 2021-04-16 19:06 ` Rob Herring 2021-04-16 19:06 ` Rob Herring 2021-04-13 10:57 ` [PATCH v3 31/33] media: atmel: atmel-isc: add microchip-xisc driver Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 32/33] MAINTAINERS: update ISC driver bindings file Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev 2021-04-13 10:57 ` [PATCH v3 33/33] MAINTAINERS: add xisc files to isc driver entry Eugen Hristev 2021-04-13 10:57 ` Eugen Hristev
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210415164011.GA1533489@robh.at.kernel.org \ --to=robh@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=eugen.hristev@microchip.com \ --cc=jacopo@jmondi.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.