[PATCH 1/4] arm64: dts: rockchip: rk3328: Enable USB3 for Rock64 - Chen-Yu Tsai

From: Chen-Yu Tsai <wens@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Cameron Nemo <cnemo@tutanota.com>,
	devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>
Subject: [PATCH 1/4] arm64: dts: rockchip: rk3328: Enable USB3 for Rock64
Date: Tue,  4 May 2021 16:36:13 +0800	[thread overview]
Message-ID: <20210504083616.9654-2-wens@kernel.org> (raw)
In-Reply-To: <20210504083616.9654-1-wens@kernel.org>

From: Cameron Nemo <cnemo@tutanota.com>

Enable USB3 nodes for the rk3328-based PINE Rock64 board.

The separate power regulator is not added as it is controlled by the
same GPIO line as the existing VBUS regulators, so it is already
enabled. Also there is no port representation to tie the regulator to.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
[wens@csie.org: Rewrote commit message]
[wens@csie.org: Rebased onto v5.12]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 3bef1f39bc6e..1b0f7e4551ea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -381,6 +381,11 @@ &usb20_otg {
 	status = "okay";
 };
 
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usb_host0_ehci {
 	status = "okay";
 };
-- 
2.31.1

