All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Chen-Yu Tsai <wens@csie.org>,
	devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/4] arm64: dts: rockchip: rk3328: Enable USB3 for ROC-RK3328-CC
Date: Tue,  4 May 2021 16:36:14 +0800	[thread overview]
Message-ID: <20210504083616.9654-3-wens@kernel.org> (raw)
In-Reply-To: <20210504083616.9654-1-wens@kernel.org>

From: Chen-Yu Tsai <wens@csie.org>

Enable USB3 nodes for the ROC-RK3328-CC board.

The separate power regulator is not added as it is controlled by the
same GPIO line as the existing VBUS regulators, so it is already
enabled. Also there is no port representation to tie the regulator to.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index a05732b59f38..bdf0ca07eae9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -363,6 +363,11 @@ &usb20_otg {
 	status = "okay";
 };
 
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usb_host0_ehci {
 	status = "okay";
 };
-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Chen-Yu Tsai <wens@csie.org>,
	devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/4] arm64: dts: rockchip: rk3328: Enable USB3 for ROC-RK3328-CC
Date: Tue,  4 May 2021 16:36:14 +0800	[thread overview]
Message-ID: <20210504083616.9654-3-wens@kernel.org> (raw)
In-Reply-To: <20210504083616.9654-1-wens@kernel.org>

From: Chen-Yu Tsai <wens@csie.org>

Enable USB3 nodes for the ROC-RK3328-CC board.

The separate power regulator is not added as it is controlled by the
same GPIO line as the existing VBUS regulators, so it is already
enabled. Also there is no port representation to tie the regulator to.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index a05732b59f38..bdf0ca07eae9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -363,6 +363,11 @@ &usb20_otg {
 	status = "okay";
 };
 
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usb_host0_ehci {
 	status = "okay";
 };
-- 
2.31.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Chen-Yu Tsai <wens@csie.org>,
	devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/4] arm64: dts: rockchip: rk3328: Enable USB3 for ROC-RK3328-CC
Date: Tue,  4 May 2021 16:36:14 +0800	[thread overview]
Message-ID: <20210504083616.9654-3-wens@kernel.org> (raw)
In-Reply-To: <20210504083616.9654-1-wens@kernel.org>

From: Chen-Yu Tsai <wens@csie.org>

Enable USB3 nodes for the ROC-RK3328-CC board.

The separate power regulator is not added as it is controlled by the
same GPIO line as the existing VBUS regulators, so it is already
enabled. Also there is no port representation to tie the regulator to.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index a05732b59f38..bdf0ca07eae9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -363,6 +363,11 @@ &usb20_otg {
 	status = "okay";
 };
 
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usb_host0_ehci {
 	status = "okay";
 };
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-05-04  8:39 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-04  8:36 [PATCH 0/4] arm64: dts: rockchip: rk3328: Enable USB3 on some SBCs Chen-Yu Tsai
2021-05-04  8:36 ` Chen-Yu Tsai
2021-05-04  8:36 ` Chen-Yu Tsai
2021-05-04  8:36 ` [PATCH 1/4] arm64: dts: rockchip: rk3328: Enable USB3 for Rock64 Chen-Yu Tsai
2021-05-04  8:36   ` Chen-Yu Tsai
2021-05-04  8:36   ` Chen-Yu Tsai
2021-05-04  8:36 ` Chen-Yu Tsai [this message]
2021-05-04  8:36   ` [PATCH 2/4] arm64: dts: rockchip: rk3328: Enable USB3 for ROC-RK3328-CC Chen-Yu Tsai
2021-05-04  8:36   ` Chen-Yu Tsai
2021-05-04  8:36 ` [PATCH 3/4] arm64: dts: rockchip: rk3328: Enable USB3 for Rock Pi E Chen-Yu Tsai
2021-05-04  8:36   ` Chen-Yu Tsai
2021-05-04  8:36   ` Chen-Yu Tsai
2021-05-04  8:36 ` [PATCH 4/4] arm64: dts: rockchip: rk3328: Enable USB3 Ethernet on NanoPi R2S Chen-Yu Tsai
2021-05-04  8:36   ` Chen-Yu Tsai
2021-05-04  8:36   ` Chen-Yu Tsai
2021-05-09 23:55 ` [PATCH 0/4] arm64: dts: rockchip: rk3328: Enable USB3 on some SBCs Heiko Stuebner
2021-05-09 23:55   ` Heiko Stuebner
2021-05-09 23:55   ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210504083616.9654-3-wens@kernel.org \
    --to=wens@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.