All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boqun Feng <boqun.feng@gmail.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Arnd Bergmann <arnd@arndb.de>, Marc Zyngier <maz@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: "Catalin Marinas" <catalin.marinas@arm.com>,
	"Will Deacon" <will@kernel.org>,
	"K. Y. Srinivasan" <kys@microsoft.com>,
	"Haiyang Zhang" <haiyangz@microsoft.com>,
	"Stephen Hemminger" <sthemmin@microsoft.com>,
	"Wei Liu" <wei.liu@kernel.org>,
	"Dexuan Cui" <decui@microsoft.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Boqun Feng" <boqun.feng@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-hyperv@vger.kernel.org,
	linux-pci@vger.kernel.org,
	"Sunil Muthuswamy" <sunilmut@microsoft.com>,
	"Mike Rapoport" <rppt@kernel.org>
Subject: [PATCH v6 1/8] PCI: Introduce domain_nr in pci_host_bridge
Date: Tue, 27 Jul 2021 02:06:50 +0800	[thread overview]
Message-ID: <20210726180657.142727-2-boqun.feng@gmail.com> (raw)
In-Reply-To: <20210726180657.142727-1-boqun.feng@gmail.com>

Currently we retrieve the PCI domain number of the host bridge from the
bus sysdata (or pci_config_window if PCI_DOMAINS_GENERIC=y). Actually
we have the information at PCI host bridge probing time, and it makes
sense that we store it into pci_host_bridge. One benefit of doing so is
the requirement for supporting PCI on Hyper-V for ARM64, because the
host bridge of Hyper-V doesn't have pci_config_window, whereas ARM64 is
a PCI_DOMAINS_GENERIC=y arch, so we cannot retrieve the PCI domain
number from pci_config_window on ARM64 Hyper-V guest.

As the preparation for ARM64 Hyper-V PCI support, we introduce the
domain_nr in pci_host_bridge and a sentinel value to allow drivers to
set domain numbers properly at probing time. Currently
CONFIG_PCI_DOMAINS_GENERIC=y archs are only users of this
newly-introduced field.

Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/probe.c |  6 +++++-
 include/linux/pci.h | 11 +++++++++++
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 79177ac37880..60c50d4f156f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -594,6 +594,7 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
 	bridge->native_pme = 1;
 	bridge->native_ltr = 1;
 	bridge->native_dpc = 1;
+	bridge->domain_nr = PCI_DOMAIN_NR_NOT_SET;
 
 	device_initialize(&bridge->dev);
 }
@@ -898,7 +899,10 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge)
 	bus->ops = bridge->ops;
 	bus->number = bus->busn_res.start = bridge->busnr;
 #ifdef CONFIG_PCI_DOMAINS_GENERIC
-	bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
+	if (bridge->domain_nr == PCI_DOMAIN_NR_NOT_SET)
+		bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
+	else
+		bus->domain_nr = bridge->domain_nr;
 #endif
 
 	b = pci_find_bus(pci_domain_nr(bus), bridge->busnr);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 540b377ca8f6..01aa201e1df0 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -526,6 +526,16 @@ static inline int pci_channel_offline(struct pci_dev *pdev)
 	return (pdev->error_state != pci_channel_io_normal);
 }
 
+/*
+ * Currently in ACPI spec, for each PCI host bridge, PCI Segment
+ * Group number is limited to a 16-bit value, therefore (int)-1 is
+ * not a valid PCI domain number, and can be used as a sentinel
+ * value indicating ->domain_nr is not set by the driver (and
+ * CONFIG_PCI_DOMAINS_GENERIC=y archs will set it with
+ * pci_bus_find_domain_nr()).
+ */
+#define PCI_DOMAIN_NR_NOT_SET (-1)
+
 struct pci_host_bridge {
 	struct device	dev;
 	struct pci_bus	*bus;		/* Root bus */
@@ -533,6 +543,7 @@ struct pci_host_bridge {
 	struct pci_ops	*child_ops;
 	void		*sysdata;
 	int		busnr;
+	int		domain_nr;
 	struct list_head windows;	/* resource_entry */
 	struct list_head dma_ranges;	/* dma ranges resource list */
 	u8 (*swizzle_irq)(struct pci_dev *, u8 *); /* Platform IRQ swizzler */
-- 
2.32.0


WARNING: multiple messages have this Message-ID (diff)
From: Boqun Feng <boqun.feng@gmail.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Arnd Bergmann <arnd@arndb.de>, Marc Zyngier <maz@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: "Catalin Marinas" <catalin.marinas@arm.com>,
	"Will Deacon" <will@kernel.org>,
	"K. Y. Srinivasan" <kys@microsoft.com>,
	"Haiyang Zhang" <haiyangz@microsoft.com>,
	"Stephen Hemminger" <sthemmin@microsoft.com>,
	"Wei Liu" <wei.liu@kernel.org>,
	"Dexuan Cui" <decui@microsoft.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Boqun Feng" <boqun.feng@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-hyperv@vger.kernel.org,
	linux-pci@vger.kernel.org,
	"Sunil Muthuswamy" <sunilmut@microsoft.com>,
	"Mike Rapoport" <rppt@kernel.org>
Subject: [PATCH v6 1/8] PCI: Introduce domain_nr in pci_host_bridge
Date: Tue, 27 Jul 2021 02:06:50 +0800	[thread overview]
Message-ID: <20210726180657.142727-2-boqun.feng@gmail.com> (raw)
In-Reply-To: <20210726180657.142727-1-boqun.feng@gmail.com>

Currently we retrieve the PCI domain number of the host bridge from the
bus sysdata (or pci_config_window if PCI_DOMAINS_GENERIC=y). Actually
we have the information at PCI host bridge probing time, and it makes
sense that we store it into pci_host_bridge. One benefit of doing so is
the requirement for supporting PCI on Hyper-V for ARM64, because the
host bridge of Hyper-V doesn't have pci_config_window, whereas ARM64 is
a PCI_DOMAINS_GENERIC=y arch, so we cannot retrieve the PCI domain
number from pci_config_window on ARM64 Hyper-V guest.

As the preparation for ARM64 Hyper-V PCI support, we introduce the
domain_nr in pci_host_bridge and a sentinel value to allow drivers to
set domain numbers properly at probing time. Currently
CONFIG_PCI_DOMAINS_GENERIC=y archs are only users of this
newly-introduced field.

Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/probe.c |  6 +++++-
 include/linux/pci.h | 11 +++++++++++
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 79177ac37880..60c50d4f156f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -594,6 +594,7 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
 	bridge->native_pme = 1;
 	bridge->native_ltr = 1;
 	bridge->native_dpc = 1;
+	bridge->domain_nr = PCI_DOMAIN_NR_NOT_SET;
 
 	device_initialize(&bridge->dev);
 }
@@ -898,7 +899,10 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge)
 	bus->ops = bridge->ops;
 	bus->number = bus->busn_res.start = bridge->busnr;
 #ifdef CONFIG_PCI_DOMAINS_GENERIC
-	bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
+	if (bridge->domain_nr == PCI_DOMAIN_NR_NOT_SET)
+		bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
+	else
+		bus->domain_nr = bridge->domain_nr;
 #endif
 
 	b = pci_find_bus(pci_domain_nr(bus), bridge->busnr);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 540b377ca8f6..01aa201e1df0 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -526,6 +526,16 @@ static inline int pci_channel_offline(struct pci_dev *pdev)
 	return (pdev->error_state != pci_channel_io_normal);
 }
 
+/*
+ * Currently in ACPI spec, for each PCI host bridge, PCI Segment
+ * Group number is limited to a 16-bit value, therefore (int)-1 is
+ * not a valid PCI domain number, and can be used as a sentinel
+ * value indicating ->domain_nr is not set by the driver (and
+ * CONFIG_PCI_DOMAINS_GENERIC=y archs will set it with
+ * pci_bus_find_domain_nr()).
+ */
+#define PCI_DOMAIN_NR_NOT_SET (-1)
+
 struct pci_host_bridge {
 	struct device	dev;
 	struct pci_bus	*bus;		/* Root bus */
@@ -533,6 +543,7 @@ struct pci_host_bridge {
 	struct pci_ops	*child_ops;
 	void		*sysdata;
 	int		busnr;
+	int		domain_nr;
 	struct list_head windows;	/* resource_entry */
 	struct list_head dma_ranges;	/* dma ranges resource list */
 	u8 (*swizzle_irq)(struct pci_dev *, u8 *); /* Platform IRQ swizzler */
-- 
2.32.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-07-26 18:07 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-26 18:06 [PATCH v6 0/8] PCI: hv: Support host bridge probing on ARM64 Boqun Feng
2021-07-26 18:06 ` Boqun Feng
2021-07-26 18:06 ` Boqun Feng [this message]
2021-07-26 18:06   ` [PATCH v6 1/8] PCI: Introduce domain_nr in pci_host_bridge Boqun Feng
2021-07-26 18:06 ` [PATCH v6 2/8] PCI: Support populating MSI domains of root buses via bridges Boqun Feng
2021-07-26 18:06   ` Boqun Feng
2021-07-27 16:14   ` Bjorn Helgaas
2021-07-27 16:14     ` Bjorn Helgaas
2021-07-26 18:06 ` [PATCH v6 3/8] arm64: PCI: Restructure pcibios_root_bridge_prepare() Boqun Feng
2021-07-26 18:06   ` Boqun Feng
2021-08-23  9:43   ` Catalin Marinas
2021-08-23  9:43     ` Catalin Marinas
2021-07-26 18:06 ` [PATCH v6 4/8] arm64: PCI: Support root bridge preparation for Hyper-V Boqun Feng
2021-07-26 18:06   ` Boqun Feng
2021-08-19 16:13   ` Boqun Feng
2021-08-19 16:13     ` Boqun Feng
2021-08-20 17:49     ` Catalin Marinas
2021-08-20 17:49       ` Catalin Marinas
2021-08-23  9:12       ` Lorenzo Pieralisi
2021-08-23  9:12         ` Lorenzo Pieralisi
2021-08-23  9:43   ` Catalin Marinas
2021-08-23  9:43     ` Catalin Marinas
2021-07-26 18:06 ` [PATCH v6 5/8] PCI: hv: Generify PCI probing Boqun Feng
2021-07-26 18:06   ` Boqun Feng
2021-07-26 18:06 ` [PATCH v6 6/8] PCI: hv: Set ->domain_nr of pci_host_bridge at probing time Boqun Feng
2021-07-26 18:06   ` Boqun Feng
2021-07-26 18:06 ` [PATCH v6 7/8] PCI: hv: Set up MSI domain at bridge " Boqun Feng
2021-07-26 18:06   ` Boqun Feng
2021-07-26 18:06 ` [PATCH v6 8/8] PCI: hv: Turn on the host bridge probing on ARM64 Boqun Feng
2021-07-26 18:06   ` Boqun Feng
2021-08-03 17:14   ` Lorenzo Pieralisi
2021-08-03 17:14     ` Lorenzo Pieralisi
2021-08-09 14:38     ` Boqun Feng
2021-08-09 14:38       ` Boqun Feng
2021-08-09 15:53       ` Lorenzo Pieralisi
2021-08-09 15:53         ` Lorenzo Pieralisi
2021-08-19 12:19         ` Boqun Feng
2021-08-19 12:19           ` Boqun Feng
2021-07-27 16:12 ` [PATCH v6 0/8] PCI: hv: Support " Bjorn Helgaas
2021-07-27 16:12   ` Bjorn Helgaas
2021-08-02  8:13   ` Boqun Feng
2021-08-02  8:13     ` Boqun Feng
2021-08-02  8:15 ` Boqun Feng
2021-08-02  8:15   ` Boqun Feng
2021-08-02 23:05   ` Bjorn Helgaas
2021-08-02 23:05     ` Bjorn Helgaas
2021-08-19 14:17 ` Lorenzo Pieralisi
2021-08-19 14:17   ` Lorenzo Pieralisi
2021-08-19 15:47   ` Boqun Feng
2021-08-19 15:47     ` Boqun Feng
2021-08-23 10:10     ` Lorenzo Pieralisi
2021-08-23 10:10       ` Lorenzo Pieralisi
2021-08-23 12:49       ` Boqun Feng
2021-08-23 12:49         ` Boqun Feng
2021-08-23 10:02 ` Lorenzo Pieralisi
2021-08-23 10:02   ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210726180657.142727-2-boqun.feng@gmail.com \
    --to=boqun.feng@gmail.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=decui@microsoft.com \
    --cc=haiyangz@microsoft.com \
    --cc=kw@linux.com \
    --cc=kys@microsoft.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maz@kernel.org \
    --cc=robh@kernel.org \
    --cc=rppt@kernel.org \
    --cc=sthemmin@microsoft.com \
    --cc=sunilmut@microsoft.com \
    --cc=wei.liu@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.