From: Boqun Feng <boqun.feng@gmail.com> To: Bjorn Helgaas <bhelgaas@google.com>, Arnd Bergmann <arnd@arndb.de>, Marc Zyngier <maz@kernel.org>, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: "Catalin Marinas" <catalin.marinas@arm.com>, "Will Deacon" <will@kernel.org>, "K. Y. Srinivasan" <kys@microsoft.com>, "Haiyang Zhang" <haiyangz@microsoft.com>, "Stephen Hemminger" <sthemmin@microsoft.com>, "Wei Liu" <wei.liu@kernel.org>, "Dexuan Cui" <decui@microsoft.com>, "Rob Herring" <robh@kernel.org>, "Krzysztof Wilczyński" <kw@linux.com>, "Boqun Feng" <boqun.feng@gmail.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-hyperv@vger.kernel.org, linux-pci@vger.kernel.org, "Sunil Muthuswamy" <sunilmut@microsoft.com>, "Mike Rapoport" <rppt@kernel.org> Subject: [PATCH v6 7/8] PCI: hv: Set up MSI domain at bridge probing time Date: Tue, 27 Jul 2021 02:06:56 +0800 [thread overview] Message-ID: <20210726180657.142727-8-boqun.feng@gmail.com> (raw) In-Reply-To: <20210726180657.142727-1-boqun.feng@gmail.com> Since PCI_HYPERV depends on PCI_MSI_IRQ_DOMAIN which selects GENERIC_MSI_IRQ_DOMAIN, we can use dev_set_msi_domain() to set up the MSI domain at probing time, and this works for both x86 and ARM64. Therefore use it as the preparation for ARM64 Hyper-V PCI support. As a result, no longer need to maintain ->fwnode in x86 specific pci_sysdata, and make hv_pcibus_device own it instead. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> --- drivers/pci/controller/pci-hyperv.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 5741b1dd3c14..e6276aaa4659 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -450,6 +450,7 @@ enum hv_pcibus_state { struct hv_pcibus_device { struct pci_sysdata sysdata; struct pci_host_bridge *bridge; + struct fwnode_handle *fwnode; /* Protocol version negotiated with the host */ enum pci_protocol_version_t protocol_version; enum hv_pcibus_state state; @@ -1565,7 +1566,7 @@ static int hv_pcie_init_irq_domain(struct hv_pcibus_device *hbus) hbus->msi_info.handler = handle_edge_irq; hbus->msi_info.handler_name = "edge"; hbus->msi_info.data = hbus; - hbus->irq_domain = pci_msi_create_irq_domain(hbus->sysdata.fwnode, + hbus->irq_domain = pci_msi_create_irq_domain(hbus->fwnode, &hbus->msi_info, x86_vector_domain); if (!hbus->irq_domain) { @@ -1574,6 +1575,8 @@ static int hv_pcie_init_irq_domain(struct hv_pcibus_device *hbus) return -ENODEV; } + dev_set_msi_domain(&hbus->bridge->dev, hbus->irq_domain); + return 0; } @@ -3118,9 +3121,9 @@ static int hv_pci_probe(struct hv_device *hdev, goto unmap; } - hbus->sysdata.fwnode = irq_domain_alloc_named_fwnode(name); + hbus->fwnode = irq_domain_alloc_named_fwnode(name); kfree(name); - if (!hbus->sysdata.fwnode) { + if (!hbus->fwnode) { ret = -ENOMEM; goto unmap; } @@ -3198,7 +3201,7 @@ static int hv_pci_probe(struct hv_device *hdev, free_irq_domain: irq_domain_remove(hbus->irq_domain); free_fwnode: - irq_domain_free_fwnode(hbus->sysdata.fwnode); + irq_domain_free_fwnode(hbus->fwnode); unmap: iounmap(hbus->cfg_addr); free_config: @@ -3314,7 +3317,7 @@ static int hv_pci_remove(struct hv_device *hdev) hv_free_config_window(hbus); hv_pci_free_bridge_windows(hbus); irq_domain_remove(hbus->irq_domain); - irq_domain_free_fwnode(hbus->sysdata.fwnode); + irq_domain_free_fwnode(hbus->fwnode); hv_put_dom_num(hbus->bridge->domain_nr); -- 2.32.0
WARNING: multiple messages have this Message-ID (diff)
From: Boqun Feng <boqun.feng@gmail.com> To: Bjorn Helgaas <bhelgaas@google.com>, Arnd Bergmann <arnd@arndb.de>, Marc Zyngier <maz@kernel.org>, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: "Catalin Marinas" <catalin.marinas@arm.com>, "Will Deacon" <will@kernel.org>, "K. Y. Srinivasan" <kys@microsoft.com>, "Haiyang Zhang" <haiyangz@microsoft.com>, "Stephen Hemminger" <sthemmin@microsoft.com>, "Wei Liu" <wei.liu@kernel.org>, "Dexuan Cui" <decui@microsoft.com>, "Rob Herring" <robh@kernel.org>, "Krzysztof Wilczyński" <kw@linux.com>, "Boqun Feng" <boqun.feng@gmail.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-hyperv@vger.kernel.org, linux-pci@vger.kernel.org, "Sunil Muthuswamy" <sunilmut@microsoft.com>, "Mike Rapoport" <rppt@kernel.org> Subject: [PATCH v6 7/8] PCI: hv: Set up MSI domain at bridge probing time Date: Tue, 27 Jul 2021 02:06:56 +0800 [thread overview] Message-ID: <20210726180657.142727-8-boqun.feng@gmail.com> (raw) In-Reply-To: <20210726180657.142727-1-boqun.feng@gmail.com> Since PCI_HYPERV depends on PCI_MSI_IRQ_DOMAIN which selects GENERIC_MSI_IRQ_DOMAIN, we can use dev_set_msi_domain() to set up the MSI domain at probing time, and this works for both x86 and ARM64. Therefore use it as the preparation for ARM64 Hyper-V PCI support. As a result, no longer need to maintain ->fwnode in x86 specific pci_sysdata, and make hv_pcibus_device own it instead. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> --- drivers/pci/controller/pci-hyperv.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 5741b1dd3c14..e6276aaa4659 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -450,6 +450,7 @@ enum hv_pcibus_state { struct hv_pcibus_device { struct pci_sysdata sysdata; struct pci_host_bridge *bridge; + struct fwnode_handle *fwnode; /* Protocol version negotiated with the host */ enum pci_protocol_version_t protocol_version; enum hv_pcibus_state state; @@ -1565,7 +1566,7 @@ static int hv_pcie_init_irq_domain(struct hv_pcibus_device *hbus) hbus->msi_info.handler = handle_edge_irq; hbus->msi_info.handler_name = "edge"; hbus->msi_info.data = hbus; - hbus->irq_domain = pci_msi_create_irq_domain(hbus->sysdata.fwnode, + hbus->irq_domain = pci_msi_create_irq_domain(hbus->fwnode, &hbus->msi_info, x86_vector_domain); if (!hbus->irq_domain) { @@ -1574,6 +1575,8 @@ static int hv_pcie_init_irq_domain(struct hv_pcibus_device *hbus) return -ENODEV; } + dev_set_msi_domain(&hbus->bridge->dev, hbus->irq_domain); + return 0; } @@ -3118,9 +3121,9 @@ static int hv_pci_probe(struct hv_device *hdev, goto unmap; } - hbus->sysdata.fwnode = irq_domain_alloc_named_fwnode(name); + hbus->fwnode = irq_domain_alloc_named_fwnode(name); kfree(name); - if (!hbus->sysdata.fwnode) { + if (!hbus->fwnode) { ret = -ENOMEM; goto unmap; } @@ -3198,7 +3201,7 @@ static int hv_pci_probe(struct hv_device *hdev, free_irq_domain: irq_domain_remove(hbus->irq_domain); free_fwnode: - irq_domain_free_fwnode(hbus->sysdata.fwnode); + irq_domain_free_fwnode(hbus->fwnode); unmap: iounmap(hbus->cfg_addr); free_config: @@ -3314,7 +3317,7 @@ static int hv_pci_remove(struct hv_device *hdev) hv_free_config_window(hbus); hv_pci_free_bridge_windows(hbus); irq_domain_remove(hbus->irq_domain); - irq_domain_free_fwnode(hbus->sysdata.fwnode); + irq_domain_free_fwnode(hbus->fwnode); hv_put_dom_num(hbus->bridge->domain_nr); -- 2.32.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-26 18:07 UTC|newest] Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-26 18:06 [PATCH v6 0/8] PCI: hv: Support host bridge probing on ARM64 Boqun Feng 2021-07-26 18:06 ` Boqun Feng 2021-07-26 18:06 ` [PATCH v6 1/8] PCI: Introduce domain_nr in pci_host_bridge Boqun Feng 2021-07-26 18:06 ` Boqun Feng 2021-07-26 18:06 ` [PATCH v6 2/8] PCI: Support populating MSI domains of root buses via bridges Boqun Feng 2021-07-26 18:06 ` Boqun Feng 2021-07-27 16:14 ` Bjorn Helgaas 2021-07-27 16:14 ` Bjorn Helgaas 2021-07-26 18:06 ` [PATCH v6 3/8] arm64: PCI: Restructure pcibios_root_bridge_prepare() Boqun Feng 2021-07-26 18:06 ` Boqun Feng 2021-08-23 9:43 ` Catalin Marinas 2021-08-23 9:43 ` Catalin Marinas 2021-07-26 18:06 ` [PATCH v6 4/8] arm64: PCI: Support root bridge preparation for Hyper-V Boqun Feng 2021-07-26 18:06 ` Boqun Feng 2021-08-19 16:13 ` Boqun Feng 2021-08-19 16:13 ` Boqun Feng 2021-08-20 17:49 ` Catalin Marinas 2021-08-20 17:49 ` Catalin Marinas 2021-08-23 9:12 ` Lorenzo Pieralisi 2021-08-23 9:12 ` Lorenzo Pieralisi 2021-08-23 9:43 ` Catalin Marinas 2021-08-23 9:43 ` Catalin Marinas 2021-07-26 18:06 ` [PATCH v6 5/8] PCI: hv: Generify PCI probing Boqun Feng 2021-07-26 18:06 ` Boqun Feng 2021-07-26 18:06 ` [PATCH v6 6/8] PCI: hv: Set ->domain_nr of pci_host_bridge at probing time Boqun Feng 2021-07-26 18:06 ` Boqun Feng 2021-07-26 18:06 ` Boqun Feng [this message] 2021-07-26 18:06 ` [PATCH v6 7/8] PCI: hv: Set up MSI domain at bridge " Boqun Feng 2021-07-26 18:06 ` [PATCH v6 8/8] PCI: hv: Turn on the host bridge probing on ARM64 Boqun Feng 2021-07-26 18:06 ` Boqun Feng 2021-08-03 17:14 ` Lorenzo Pieralisi 2021-08-03 17:14 ` Lorenzo Pieralisi 2021-08-09 14:38 ` Boqun Feng 2021-08-09 14:38 ` Boqun Feng 2021-08-09 15:53 ` Lorenzo Pieralisi 2021-08-09 15:53 ` Lorenzo Pieralisi 2021-08-19 12:19 ` Boqun Feng 2021-08-19 12:19 ` Boqun Feng 2021-07-27 16:12 ` [PATCH v6 0/8] PCI: hv: Support " Bjorn Helgaas 2021-07-27 16:12 ` Bjorn Helgaas 2021-08-02 8:13 ` Boqun Feng 2021-08-02 8:13 ` Boqun Feng 2021-08-02 8:15 ` Boqun Feng 2021-08-02 8:15 ` Boqun Feng 2021-08-02 23:05 ` Bjorn Helgaas 2021-08-02 23:05 ` Bjorn Helgaas 2021-08-19 14:17 ` Lorenzo Pieralisi 2021-08-19 14:17 ` Lorenzo Pieralisi 2021-08-19 15:47 ` Boqun Feng 2021-08-19 15:47 ` Boqun Feng 2021-08-23 10:10 ` Lorenzo Pieralisi 2021-08-23 10:10 ` Lorenzo Pieralisi 2021-08-23 12:49 ` Boqun Feng 2021-08-23 12:49 ` Boqun Feng 2021-08-23 10:02 ` Lorenzo Pieralisi 2021-08-23 10:02 ` Lorenzo Pieralisi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210726180657.142727-8-boqun.feng@gmail.com \ --to=boqun.feng@gmail.com \ --cc=arnd@arndb.de \ --cc=bhelgaas@google.com \ --cc=catalin.marinas@arm.com \ --cc=decui@microsoft.com \ --cc=haiyangz@microsoft.com \ --cc=kw@linux.com \ --cc=kys@microsoft.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-hyperv@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=lorenzo.pieralisi@arm.com \ --cc=maz@kernel.org \ --cc=robh@kernel.org \ --cc=rppt@kernel.org \ --cc=sthemmin@microsoft.com \ --cc=sunilmut@microsoft.com \ --cc=wei.liu@kernel.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.