From: Mark Rutland <mark.rutland@arm.com>
To: Bert Vermeulen <bert@biot.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
soc@kernel.org, Rob Herring <robh+dt@kernel.org>,
John Crispin <john@phrozen.org>, Felix Fietkau <nbd@nbd.name>
Subject: Re: [PATCH 3/5] ARM: dts: Add basic support for EcoNet EN7523
Date: Fri, 30 Jul 2021 15:46:27 +0100 [thread overview]
Message-ID: <20210730144627.GB19569@C02TD0UTHF1T.local> (raw)
In-Reply-To: <20210730134552.853350-4-bert@biot.com>
On Fri, Jul 30, 2021 at 03:45:50PM +0200, Bert Vermeulen wrote:
> From: John Crispin <john@phrozen.org>
>
> Add basic support for EcoNet EN7523, enough for booting to console.
>
> The UART is basically 8250-compatible, except for the clock selection.
> A clock-frequency value is synthesized to get this to run at 115200 bps.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Bert Vermeulen <bert@biot.com>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/en7523-evb.dts | 17 ++++
> arch/arm/boot/dts/en7523.dtsi | 128 +++++++++++++++++++++++++++++++
> 3 files changed, 147 insertions(+)
> create mode 100644 arch/arm/boot/dts/en7523-evb.dts
> create mode 100644 arch/arm/boot/dts/en7523.dtsi
[...]
> + gic: interrupt-controller@09000000 {
> + compatible = "arm,gic-v3";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x09000000 0x20000>,
> + <0x09080000 0x80000>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> +
> + its: gic-its@09020000 {
> + compatible = "arm,gic-v3-its";
> + msi-controller;
> + #msi-cell = <1>;
> + reg = <0x090200000 0x20000>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
This should be "arm,armv7-timer".
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
GICv3 doesn't have a cpumask in its PPI description, so the
GIC_CPU_MASK_SIMPLE() bits should be removed.
> + clock-frequency = <25000000>;
Please have your FW configure CNTFRQ on each CPU; the clock-frequency
property in the DT is a workaround for broken FW, and it's *vastly*
preferable for FW to configure this correctly (e.g. as it means VMs
should "just work").
Thanks,
Mark.
WARNING: multiple messages have this Message-ID (diff)
From: Mark Rutland <mark.rutland@arm.com>
To: Bert Vermeulen <bert@biot.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
soc@kernel.org, Rob Herring <robh+dt@kernel.org>,
John Crispin <john@phrozen.org>, Felix Fietkau <nbd@nbd.name>
Subject: Re: [PATCH 3/5] ARM: dts: Add basic support for EcoNet EN7523
Date: Fri, 30 Jul 2021 15:46:27 +0100 [thread overview]
Message-ID: <20210730144627.GB19569@C02TD0UTHF1T.local> (raw)
Message-ID: <20210730144627.1F33ltK1e3sMgh7MQs6CwTqiQKXVoil4-YaMXCRCU-Y@z> (raw)
In-Reply-To: <20210730134552.853350-4-bert@biot.com>
On Fri, Jul 30, 2021 at 03:45:50PM +0200, Bert Vermeulen wrote:
> From: John Crispin <john@phrozen.org>
>
> Add basic support for EcoNet EN7523, enough for booting to console.
>
> The UART is basically 8250-compatible, except for the clock selection.
> A clock-frequency value is synthesized to get this to run at 115200 bps.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Bert Vermeulen <bert@biot.com>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/en7523-evb.dts | 17 ++++
> arch/arm/boot/dts/en7523.dtsi | 128 +++++++++++++++++++++++++++++++
> 3 files changed, 147 insertions(+)
> create mode 100644 arch/arm/boot/dts/en7523-evb.dts
> create mode 100644 arch/arm/boot/dts/en7523.dtsi
[...]
> + gic: interrupt-controller@09000000 {
> + compatible = "arm,gic-v3";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x09000000 0x20000>,
> + <0x09080000 0x80000>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> +
> + its: gic-its@09020000 {
> + compatible = "arm,gic-v3-its";
> + msi-controller;
> + #msi-cell = <1>;
> + reg = <0x090200000 0x20000>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
This should be "arm,armv7-timer".
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
GICv3 doesn't have a cpumask in its PPI description, so the
GIC_CPU_MASK_SIMPLE() bits should be removed.
> + clock-frequency = <25000000>;
Please have your FW configure CNTFRQ on each CPU; the clock-frequency
property in the DT is a workaround for broken FW, and it's *vastly*
preferable for FW to configure this correctly (e.g. as it means VMs
should "just work").
Thanks,
Mark.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-30 14:46 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-30 13:45 [PATCH 0/4] Add support for EcoNet EN7523 SoC Bert Vermeulen
2021-07-30 13:45 ` Bert Vermeulen
2021-07-30 13:45 ` [PATCH 1/5] dt-bindings: Add vendor prefix for EcoNet Bert Vermeulen
2021-07-30 13:45 ` Bert Vermeulen
2021-08-06 21:02 ` Rob Herring
2021-08-06 21:02 ` Rob Herring
2021-07-30 13:45 ` [PATCH 2/5] dt-bindings: arm: econet: Add binding for EN7523 SoC and EVB Bert Vermeulen
2021-07-30 13:45 ` Bert Vermeulen
2021-08-06 21:04 ` Rob Herring
2021-08-06 21:04 ` Rob Herring
2021-07-30 13:45 ` [PATCH 3/5] ARM: dts: Add basic support for EcoNet EN7523 Bert Vermeulen
2021-07-30 13:45 ` Bert Vermeulen
2021-07-30 14:31 ` Linus Walleij
2021-07-30 14:31 ` Linus Walleij
2021-07-30 14:31 ` Linus Walleij
2021-07-30 14:53 ` Marc Zyngier
2021-07-30 14:53 ` Marc Zyngier
2021-08-01 9:07 ` Bert Vermeulen
2021-08-01 9:07 ` Bert Vermeulen
2021-08-01 9:07 ` Bert Vermeulen
2021-08-01 9:40 ` Arnd Bergmann
2021-08-01 9:40 ` Arnd Bergmann
2021-08-01 9:40 ` Arnd Bergmann
2021-08-01 9:50 ` Marc Zyngier
2021-08-01 9:50 ` Marc Zyngier
2021-07-30 14:45 ` Daniel Palmer
2021-07-30 14:45 ` Daniel Palmer
2021-07-30 14:45 ` Daniel Palmer
2021-07-30 14:46 ` Mark Rutland [this message]
2021-07-30 14:46 ` Mark Rutland
2021-08-04 16:41 ` Bert Vermeulen
2021-08-04 16:41 ` Bert Vermeulen
2021-08-06 20:59 ` Rob Herring
2021-08-06 20:59 ` Rob Herring
2021-07-30 14:59 ` Mark Rutland
2021-07-30 14:59 ` Mark Rutland
2021-08-06 20:52 ` Rob Herring
2021-08-06 20:52 ` Rob Herring
2021-07-30 16:47 ` Andre Przywara
2021-07-30 16:47 ` Andre Przywara
2021-07-30 17:23 ` Marc Zyngier
2021-07-30 17:23 ` Marc Zyngier
2021-07-30 13:45 ` [PATCH 4/5] ARM: Add basic support for EcoNet EN7523 SoC Bert Vermeulen
2021-07-30 13:45 ` Bert Vermeulen
2021-07-30 14:48 ` Arnd Bergmann
2021-07-30 14:48 ` Arnd Bergmann
2021-07-30 15:15 ` John Crispin
2021-07-30 15:15 ` John Crispin
2021-07-30 16:55 ` Arnd Bergmann
2021-07-30 16:55 ` Arnd Bergmann
2021-08-01 16:44 ` Ard Biesheuvel
2021-08-01 16:44 ` Ard Biesheuvel
2021-09-03 16:20 ` Felix Fietkau
2021-09-03 16:20 ` Felix Fietkau
2021-09-03 17:47 ` Ard Biesheuvel
2021-09-03 17:47 ` Ard Biesheuvel
2021-08-04 16:43 ` Bert Vermeulen
2021-08-04 16:43 ` Bert Vermeulen
2021-08-09 12:46 ` Geert Uytterhoeven
2021-08-09 12:46 ` Geert Uytterhoeven
2021-08-09 12:49 ` Ard Biesheuvel
2021-08-09 12:49 ` Ard Biesheuvel
2021-08-09 13:00 ` Bert Vermeulen
2021-08-09 13:00 ` Bert Vermeulen
2021-07-30 13:45 ` [PATCH 5/5] ARM: multi_v7_defconfig: Add " Bert Vermeulen
2021-07-30 13:45 ` Bert Vermeulen
2021-07-30 14:26 ` [PATCH 0/4] " Linus Walleij
2021-07-30 14:26 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210730144627.GB19569@C02TD0UTHF1T.local \
--to=mark.rutland@arm.com \
--cc=arnd@arndb.de \
--cc=bert@biot.com \
--cc=devicetree@vger.kernel.org \
--cc=john@phrozen.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nbd@nbd.name \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.