From: Claudiu Beznea <claudiu.beznea@microchip.com> To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <ludovic.desroches@microchip.com>, <robh+dt@kernel.org>, <linux@armlinux.org.uk> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Claudiu Beznea <claudiu.beznea@microchip.com> Subject: [PATCH v2 4/4] ARM: dts: at91: sama7g5: add shdwc node Date: Mon, 23 Aug 2021 16:19:15 +0300 [thread overview] Message-ID: <20210823131915.23857-5-claudiu.beznea@microchip.com> (raw) In-Reply-To: <20210823131915.23857-1-claudiu.beznea@microchip.com> Add shutdown controller node and enable it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- arch/arm/boot/dts/at91-sama7g5ek.dts | 9 +++++++++ arch/arm/boot/dts/sama7g5.dtsi | 11 +++++++++++ 2 files changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index 4cbed98cc2f4..8b13b031a167 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -634,6 +634,15 @@ &sdmmc2 { pinctrl-0 = <&pinctrl_sdmmc2_default>; }; +&shdwc { + atmel,shdwc-debouncer = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + &spdifrx { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spdifrx_default>; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 3a4315ac0eb0..e50806cf7660 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -122,6 +122,17 @@ pmc: pmc@e0018000 { clock-names = "td_slck", "md_slck", "main_xtal"; }; + shdwc: shdwc@e001d010 { + compatible = "microchip,sama7g5-shdwc", "syscon"; + reg = <0xe001d010 0x10>; + clocks = <&clk32k 0>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + rtt: rtt@e001d020 { compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xe001d020 0x30>; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com> To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <ludovic.desroches@microchip.com>, <robh+dt@kernel.org>, <linux@armlinux.org.uk> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Claudiu Beznea <claudiu.beznea@microchip.com> Subject: [PATCH v2 4/4] ARM: dts: at91: sama7g5: add shdwc node Date: Mon, 23 Aug 2021 16:19:15 +0300 [thread overview] Message-ID: <20210823131915.23857-5-claudiu.beznea@microchip.com> (raw) In-Reply-To: <20210823131915.23857-1-claudiu.beznea@microchip.com> Add shutdown controller node and enable it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- arch/arm/boot/dts/at91-sama7g5ek.dts | 9 +++++++++ arch/arm/boot/dts/sama7g5.dtsi | 11 +++++++++++ 2 files changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index 4cbed98cc2f4..8b13b031a167 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -634,6 +634,15 @@ &sdmmc2 { pinctrl-0 = <&pinctrl_sdmmc2_default>; }; +&shdwc { + atmel,shdwc-debouncer = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + &spdifrx { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spdifrx_default>; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 3a4315ac0eb0..e50806cf7660 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -122,6 +122,17 @@ pmc: pmc@e0018000 { clock-names = "td_slck", "md_slck", "main_xtal"; }; + shdwc: shdwc@e001d010 { + compatible = "microchip,sama7g5-shdwc", "syscon"; + reg = <0xe001d010 0x10>; + clocks = <&clk32k 0>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + rtt: rtt@e001d020 { compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xe001d020 0x30>; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-08-23 13:19 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-23 13:19 [PATCH v2 0/4] ARM: at91: add new nodes to DT and fix for PM Claudiu Beznea 2021-08-23 13:19 ` Claudiu Beznea 2021-08-23 13:19 ` [PATCH v2 1/4] ARM: at91: pm: do not panic if ram controllers are not enabled Claudiu Beznea 2021-08-23 13:19 ` Claudiu Beznea 2021-08-23 13:19 ` [PATCH v2 2/4] ARM: dts: at91: sama7g5: add ram controllers Claudiu Beznea 2021-08-23 13:19 ` Claudiu Beznea 2021-08-23 13:19 ` [PATCH v2 3/4] ARM: dts: at91: sama7g5: add securam node Claudiu Beznea 2021-08-23 13:19 ` Claudiu Beznea 2021-08-23 13:19 ` Claudiu Beznea [this message] 2021-08-23 13:19 ` [PATCH v2 4/4] ARM: dts: at91: sama7g5: add shdwc node Claudiu Beznea 2021-09-14 14:54 ` [PATCH v2 0/4] ARM: at91: add new nodes to DT and fix for PM Nicolas Ferre 2021-09-14 14:54 ` Nicolas Ferre
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210823131915.23857-5-claudiu.beznea@microchip.com \ --to=claudiu.beznea@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=ludovic.desroches@microchip.com \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.