From: Stephan Gerhold <stephan@gerhold.net> To: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org>, linux-arm-msm@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Stephan Gerhold <stephan@gerhold.net> Subject: [PATCH v2 15/15] ARM: dts: qcom: msm8916-samsung-serranove: Include dts from arm64 Date: Mon, 4 Oct 2021 22:49:55 +0200 [thread overview] Message-ID: <20211004204955.21077-15-stephan@gerhold.net> (raw) In-Reply-To: <20211004201921.18526-1-stephan@gerhold.net> After adding all necessary support for MSM8916 SMP/cpuidle without PSCI on ARM32, build the Samsung Galaxy S4 Mini VE device tree from the arm64 tree together with the ARM32 include to allow booting this device on ARM32. The approach to include device tree files from other architectures is inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is used to build the device tree for both ARM32 and ARM64. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- Changes in v2: None. I'm not sure what's the best way to apply this patch... It might be easiest to apply the two ARM32 dts patches to the arm64 branch. (It does not seem to cause any conflicts at the moment...) --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts | 3 +++ 2 files changed, 4 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8cb859728bd9..0a53bbd9d7b1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -960,6 +960,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq8064-rb3011.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ + qcom-msm8916-samsung-serranove.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts new file mode 100644 index 000000000000..dee2c20af355 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-serranove.dts" +#include "qcom-msm8916-smp.dtsi" -- 2.33.0
WARNING: multiple messages have this Message-ID (diff)
From: Stephan Gerhold <stephan@gerhold.net> To: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org>, linux-arm-msm@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Stephan Gerhold <stephan@gerhold.net> Subject: [PATCH v2 15/15] ARM: dts: qcom: msm8916-samsung-serranove: Include dts from arm64 Date: Mon, 4 Oct 2021 22:49:55 +0200 [thread overview] Message-ID: <20211004204955.21077-15-stephan@gerhold.net> (raw) In-Reply-To: <20211004201921.18526-1-stephan@gerhold.net> After adding all necessary support for MSM8916 SMP/cpuidle without PSCI on ARM32, build the Samsung Galaxy S4 Mini VE device tree from the arm64 tree together with the ARM32 include to allow booting this device on ARM32. The approach to include device tree files from other architectures is inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is used to build the device tree for both ARM32 and ARM64. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- Changes in v2: None. I'm not sure what's the best way to apply this patch... It might be easiest to apply the two ARM32 dts patches to the arm64 branch. (It does not seem to cause any conflicts at the moment...) --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts | 3 +++ 2 files changed, 4 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8cb859728bd9..0a53bbd9d7b1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -960,6 +960,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq8064-rb3011.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ + qcom-msm8916-samsung-serranove.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts new file mode 100644 index 000000000000..dee2c20af355 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-serranove.dts" +#include "qcom-msm8916-smp.dtsi" -- 2.33.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-10-04 20:51 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-10-04 20:19 [PATCH v2 00/15] Add support for Samsung Galaxy S4 Mini Value Edition Stephan Gerhold 2021-10-04 20:19 ` Stephan Gerhold 2021-10-04 20:19 ` [PATCH v2 01/15] arm64: dts: qcom: Add device tree " Stephan Gerhold 2021-10-04 20:19 ` Stephan Gerhold 2021-10-04 20:19 ` [PATCH v2 02/15] arm64: dts: qcom: msm8916-samsung-serranove: Add touch screen Stephan Gerhold 2021-10-04 20:19 ` Stephan Gerhold 2021-10-04 20:19 ` [PATCH v2 03/15] arm64: dts: qcom: msm8916-samsung-serranove: Add touch key Stephan Gerhold 2021-10-04 20:19 ` Stephan Gerhold 2021-10-04 20:19 ` [PATCH v2 04/15] arm64: dts: qcom: msm8916-samsung-serranove: Add IMU Stephan Gerhold 2021-10-04 20:19 ` Stephan Gerhold 2021-10-04 20:19 ` [PATCH v2 05/15] arm64: dts: qcom: msm8916-samsung-serranove: Add rt5033 battery Stephan Gerhold 2021-10-04 20:19 ` Stephan Gerhold 2021-10-04 20:19 ` [PATCH v2 06/15] arm64: dts: qcom: msm8916-samsung-serranove: Add NFC Stephan Gerhold 2021-10-04 20:19 ` Stephan Gerhold 2021-10-04 20:49 ` [PATCH v2 07/15] ARM: qcom: Add ARCH_MSM8916 for MSM8916 on ARM32 Stephan Gerhold 2021-10-04 20:49 ` Stephan Gerhold 2021-10-04 20:49 ` [PATCH v2 08/15] dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method Stephan Gerhold 2021-10-04 20:49 ` [PATCH v2 08/15] dt-bindings: arm: cpus: Document qcom, msm8916-smp enable-method Stephan Gerhold 2021-10-14 16:40 ` [PATCH v2 08/15] dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method Rob Herring 2021-10-14 16:40 ` Rob Herring 2021-10-04 20:49 ` [PATCH v2 09/15] ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 Stephan Gerhold 2021-10-04 20:49 ` [PATCH v2 09/15] ARM: qcom: Add qcom, msm8916-smp " Stephan Gerhold 2021-10-04 20:49 ` [PATCH v2 10/15] dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu Stephan Gerhold 2021-10-04 20:49 ` [PATCH v2 10/15] dt-bindings: soc: qcom: spm: Document qcom, msm8916-saw2-v3.0-cpu Stephan Gerhold 2021-10-04 20:49 ` [PATCH v2 11/15] soc: qcom: spm: Add 8916 SPM register data Stephan Gerhold 2021-10-04 20:49 ` Stephan Gerhold 2021-10-04 20:49 ` [PATCH v2 12/15] firmware: qcom: scm: Add support for MC boot address API Stephan Gerhold 2021-10-04 20:49 ` Stephan Gerhold 2021-10-04 20:49 ` [PATCH v2 13/15] arm64: dts: qcom: msm8916: Add CPU ACC and SAW/SPM Stephan Gerhold 2021-10-04 20:49 ` Stephan Gerhold 2021-10-04 20:49 ` [PATCH v2 14/15] ARM: dts: qcom: msm8916: Add include for SMP without PSCI on ARM32 Stephan Gerhold 2021-10-04 20:49 ` Stephan Gerhold 2021-10-04 20:49 ` Stephan Gerhold [this message] 2021-10-04 20:49 ` [PATCH v2 15/15] ARM: dts: qcom: msm8916-samsung-serranove: Include dts from arm64 Stephan Gerhold
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211004204955.21077-15-stephan@gerhold.net \ --to=stephan@gerhold.net \ --cc=agross@kernel.org \ --cc=bjorn.andersson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=phone-devel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=~postmarketos/upstreaming@lists.sr.ht \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.