All of lore.kernel.org
 help / color / mirror / Atom feed
From: Amjad Ouled-Ameur <aouledameur@baylibre.com>
To: khilman@baylibre.com
Cc: Amjad Ouled-Ameur <aouledameur@baylibre.com>,
	p.zabel@pengutronix.de, balbi@kernel.org, jbrunet@baylibre.com,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org
Subject: [PATCH v3 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
Date: Fri, 12 Nov 2021 17:28:25 +0100	[thread overview]
Message-ID: <20211112162827.128319-2-aouledameur@baylibre.com> (raw)
In-Reply-To: <20211112162827.128319-1-aouledameur@baylibre.com>

Use reset_control_rearm() call if an error occurs in case
phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case
phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used
and the reset line may be triggered again by other devices.

reset_control_rearm() keeps use of triggered_count sane in the reset
framework. Therefore, use of reset_control_reset() on shared reset line
should be balanced with reset_control_rearm().

Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 2b3c0d730f20..9a9c769ecabc 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -110,8 +110,10 @@ static int phy_meson_gxl_usb2_init(struct phy *phy)
 	int ret;
 
 	ret = reset_control_reset(priv->reset);
-	if (ret)
+	if (ret) {
+		reset_control_rearm(priv->reset);
 		return ret;
+	}
 
 	ret = clk_prepare_enable(priv->clk);
 	if (ret)
@@ -125,6 +127,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy)
 	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
 
 	clk_disable_unprepare(priv->clk);
+	reset_control_rearm(priv->reset);
 
 	return 0;
 }
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Amjad Ouled-Ameur <aouledameur@baylibre.com>
To: khilman@baylibre.com
Cc: Amjad Ouled-Ameur <aouledameur@baylibre.com>,
	p.zabel@pengutronix.de, balbi@kernel.org, jbrunet@baylibre.com,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org
Subject: [PATCH v3 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
Date: Fri, 12 Nov 2021 17:28:25 +0100	[thread overview]
Message-ID: <20211112162827.128319-2-aouledameur@baylibre.com> (raw)
In-Reply-To: <20211112162827.128319-1-aouledameur@baylibre.com>

Use reset_control_rearm() call if an error occurs in case
phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case
phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used
and the reset line may be triggered again by other devices.

reset_control_rearm() keeps use of triggered_count sane in the reset
framework. Therefore, use of reset_control_reset() on shared reset line
should be balanced with reset_control_rearm().

Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 2b3c0d730f20..9a9c769ecabc 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -110,8 +110,10 @@ static int phy_meson_gxl_usb2_init(struct phy *phy)
 	int ret;
 
 	ret = reset_control_reset(priv->reset);
-	if (ret)
+	if (ret) {
+		reset_control_rearm(priv->reset);
 		return ret;
+	}
 
 	ret = clk_prepare_enable(priv->clk);
 	if (ret)
@@ -125,6 +127,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy)
 	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
 
 	clk_disable_unprepare(priv->clk);
+	reset_control_rearm(priv->reset);
 
 	return 0;
 }
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2021-11-12 16:32 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-12 16:28 [PATCH v3 0/3] usb: meson: fix shared reset control use Amjad Ouled-Ameur
2021-11-12 16:28 ` Amjad Ouled-Ameur
2021-11-12 16:28 ` Amjad Ouled-Ameur [this message]
2021-11-12 16:28   ` [PATCH v3 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use Amjad Ouled-Ameur
2021-11-20 23:39   ` Martin Blumenstingl
2021-11-20 23:39     ` Martin Blumenstingl
2021-11-22  9:03   ` Philipp Zabel
2021-11-22  9:03     ` Philipp Zabel
2021-12-05 21:13     ` Amjad Ouled-Ameur
2021-12-05 21:13       ` Amjad Ouled-Ameur
2021-11-12 16:28 ` [PATCH v3 2/3] usb: dwc3: meson-g12a: fix shared reset control use Amjad Ouled-Ameur
2021-11-12 16:28   ` Amjad Ouled-Ameur
2021-11-20 23:51   ` Martin Blumenstingl
2021-11-20 23:51     ` Martin Blumenstingl
2021-11-22  9:04     ` Anand Moon
2021-11-22  9:04       ` Anand Moon
2021-11-12 16:28 ` [PATCH v3 3/3] phy: amlogic: meson8b-usb2: " Amjad Ouled-Ameur
2021-11-12 16:28   ` Amjad Ouled-Ameur
2021-11-20 23:57   ` Martin Blumenstingl
2021-11-20 23:57     ` Martin Blumenstingl
2021-12-05 21:35     ` Amjad Ouled-Ameur
2021-12-05 21:35       ` Amjad Ouled-Ameur
2021-11-19 19:27 ` [PATCH v3 0/3] usb: meson: " Kevin Hilman
2021-11-19 19:27   ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211112162827.128319-2-aouledameur@baylibre.com \
    --to=aouledameur@baylibre.com \
    --cc=balbi@kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.