From: Felix Fietkau <nbd@nbd.name> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Matthias Brugger <matthias.bgg@gmail.com> Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org Subject: [PATCH RESEND v10 3/3] ARM: dts: Add PCIe support for Airoha EN7523 Date: Wed, 15 Jun 2022 14:53:35 +0200 [thread overview] Message-ID: <20220615125335.96089-3-nbd@nbd.name> (raw) In-Reply-To: <20220615125335.96089-1-nbd@nbd.name> This uses the MediaTek MT7622 PCIe driver, since the PCIe IP block is nearly identical to the one in MT7622 Signed-off-by: Felix Fietkau <nbd@nbd.name> --- arch/arm/boot/dts/en7523-evb.dts | 8 +++++ arch/arm/boot/dts/en7523.dtsi | 58 ++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+) diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts index a8d8bb0419a0..f23a25cce119 100644 --- a/arch/arm/boot/dts/en7523-evb.dts +++ b/arch/arm/boot/dts/en7523-evb.dts @@ -33,3 +33,11 @@ &gpio0 { &gpio1 { status = "okay"; }; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi index 2e705b87b6c1..7f839331a777 100644 --- a/arch/arm/boot/dts/en7523.dtsi +++ b/arch/arm/boot/dts/en7523.dtsi @@ -143,4 +143,62 @@ gpio1: gpio@1fbf0270 { gpio-controller; #gpio-cells = <2>; }; + + pcie0: pcie@1fa91000 { + compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0x1fa91000 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&scu EN7523_CLK_PCIE>; + clock-names = "sys_ck0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x20000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1fa92000 { + compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0x1fa92000 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&scu EN7523_CLK_PCIE>; + clock-names = "sys_ck1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x28000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; }; -- 2.36.1
WARNING: multiple messages have this Message-ID (diff)
From: Felix Fietkau <nbd@nbd.name> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Matthias Brugger <matthias.bgg@gmail.com> Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org Subject: [PATCH RESEND v10 3/3] ARM: dts: Add PCIe support for Airoha EN7523 Date: Wed, 15 Jun 2022 14:53:35 +0200 [thread overview] Message-ID: <20220615125335.96089-3-nbd@nbd.name> (raw) In-Reply-To: <20220615125335.96089-1-nbd@nbd.name> This uses the MediaTek MT7622 PCIe driver, since the PCIe IP block is nearly identical to the one in MT7622 Signed-off-by: Felix Fietkau <nbd@nbd.name> --- arch/arm/boot/dts/en7523-evb.dts | 8 +++++ arch/arm/boot/dts/en7523.dtsi | 58 ++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+) diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts index a8d8bb0419a0..f23a25cce119 100644 --- a/arch/arm/boot/dts/en7523-evb.dts +++ b/arch/arm/boot/dts/en7523-evb.dts @@ -33,3 +33,11 @@ &gpio0 { &gpio1 { status = "okay"; }; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi index 2e705b87b6c1..7f839331a777 100644 --- a/arch/arm/boot/dts/en7523.dtsi +++ b/arch/arm/boot/dts/en7523.dtsi @@ -143,4 +143,62 @@ gpio1: gpio@1fbf0270 { gpio-controller; #gpio-cells = <2>; }; + + pcie0: pcie@1fa91000 { + compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0x1fa91000 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&scu EN7523_CLK_PCIE>; + clock-names = "sys_ck0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x20000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1fa92000 { + compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0x1fa92000 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&scu EN7523_CLK_PCIE>; + clock-names = "sys_ck1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x28000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; }; -- 2.36.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-06-15 12:53 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-15 12:53 [PATCH RESEND v10 1/3] dt-bindings: PCI: Add support for Airoha EN7532 Felix Fietkau 2022-06-15 12:53 ` Felix Fietkau 2022-06-15 12:53 ` [PATCH RESEND v10 2/3] PCI: mediatek: Allow building for ARCH_AIROHA Felix Fietkau 2022-06-15 12:53 ` Felix Fietkau 2022-06-15 12:53 ` Felix Fietkau [this message] 2022-06-15 12:53 ` [PATCH RESEND v10 3/3] ARM: dts: Add PCIe support for Airoha EN7523 Felix Fietkau 2022-06-15 16:54 ` Matthias Brugger 2022-06-15 16:54 ` Matthias Brugger 2022-06-15 15:31 ` [PATCH RESEND v10 1/3] dt-bindings: PCI: Add support for Airoha EN7532 Bjorn Helgaas 2022-06-15 15:31 ` Bjorn Helgaas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220615125335.96089-3-nbd@nbd.name \ --to=nbd@nbd.name \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=matthias.bgg@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.