From: Frieder Schrempf <frieder@fris.de>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>,
Robin Gong <yibin.gong@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>,
Frieder Schrempf <frieder.schrempf@kontron.de>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH v2 0/8] arm64: dts: imx8mm-kontron: Improvements and OSM board support
Date: Mon, 1 Aug 2022 15:15:44 +0200 [thread overview]
Message-ID: <20220801131554.116795-1-frieder@fris.de> (raw)
From: Frieder Schrempf <frieder.schrempf@kontron.de>
This set contains a few small improvements for the imx8mm-kontron devicetrees
(patch 3-7) and support for a new SoM (patch 8, including baseboard) that
complies to the Open Standard Module (OSM) 1.0 hardware specification, size S
(https://sget.org/standards/osm).
It also includes binding changes for the new board (patch 1) and a binding
change for the PCA9450 PMIC regulators (patch2).
Changes in v2:
* move binding changes to beginning of patchset
* Allow arbitrary regulator names in PCA9450 bindings
* Use voltage rail names from schematic for PMIC regulator-names
* Add SPI NOR partition layout to devicetree
* Remove unneeded header include
* Add tags
Frieder Schrempf (8):
dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board
dt-bindings: regulator: pca9450: Allow arbitrary regulator names
arm64: dts: imx8mm-kontron: Adjust board and SoM model strings
arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card
IO voltage
arm64: dts: imx8mm-kontron: Remove low DDRC operating point
arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for
PMIC regulator-names
arm64: dts: imx8mm-kontron: Add SPI NOR partition layout
arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S
.../devicetree/bindings/arm/fsl.yaml | 6 +
.../regulator/nxp,pca9450-regulator.yaml | 8 +-
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx8mm-kontron-n801x-s.dts | 5 +-
.../freescale/imx8mm-kontron-n801x-som.dtsi | 51 ++-
.../dts/freescale/imx8mm-kontron-n802x-s.dts | 376 ++++++++++++++++++
.../freescale/imx8mm-kontron-n802x-som.dtsi | 330 +++++++++++++++
7 files changed, 754 insertions(+), 23 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n802x-s.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n802x-som.dtsi
--
2.37.1
WARNING: multiple messages have this Message-ID (diff)
From: Frieder Schrempf <frieder@fris.de>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>,
Robin Gong <yibin.gong@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>,
Frieder Schrempf <frieder.schrempf@kontron.de>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH v2 0/8] arm64: dts: imx8mm-kontron: Improvements and OSM board support
Date: Mon, 1 Aug 2022 15:15:44 +0200 [thread overview]
Message-ID: <20220801131554.116795-1-frieder@fris.de> (raw)
From: Frieder Schrempf <frieder.schrempf@kontron.de>
This set contains a few small improvements for the imx8mm-kontron devicetrees
(patch 3-7) and support for a new SoM (patch 8, including baseboard) that
complies to the Open Standard Module (OSM) 1.0 hardware specification, size S
(https://sget.org/standards/osm).
It also includes binding changes for the new board (patch 1) and a binding
change for the PCA9450 PMIC regulators (patch2).
Changes in v2:
* move binding changes to beginning of patchset
* Allow arbitrary regulator names in PCA9450 bindings
* Use voltage rail names from schematic for PMIC regulator-names
* Add SPI NOR partition layout to devicetree
* Remove unneeded header include
* Add tags
Frieder Schrempf (8):
dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board
dt-bindings: regulator: pca9450: Allow arbitrary regulator names
arm64: dts: imx8mm-kontron: Adjust board and SoM model strings
arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card
IO voltage
arm64: dts: imx8mm-kontron: Remove low DDRC operating point
arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for
PMIC regulator-names
arm64: dts: imx8mm-kontron: Add SPI NOR partition layout
arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S
.../devicetree/bindings/arm/fsl.yaml | 6 +
.../regulator/nxp,pca9450-regulator.yaml | 8 +-
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx8mm-kontron-n801x-s.dts | 5 +-
.../freescale/imx8mm-kontron-n801x-som.dtsi | 51 ++-
.../dts/freescale/imx8mm-kontron-n802x-s.dts | 376 ++++++++++++++++++
.../freescale/imx8mm-kontron-n802x-som.dtsi | 330 +++++++++++++++
7 files changed, 754 insertions(+), 23 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n802x-s.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n802x-som.dtsi
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-08-01 13:16 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-01 13:15 Frieder Schrempf [this message]
2022-08-01 13:15 ` [PATCH v2 0/8] arm64: dts: imx8mm-kontron: Improvements and OSM board support Frieder Schrempf
2022-08-01 13:15 ` [PATCH v2 1/8] dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board Frieder Schrempf
2022-08-01 13:15 ` Frieder Schrempf
2022-08-01 13:15 ` [PATCH v2 2/8] dt-bindings: regulator: pca9450: Allow arbitrary regulator names Frieder Schrempf
2022-08-01 13:15 ` Frieder Schrempf
2022-08-01 13:21 ` Mark Brown
2022-08-01 13:21 ` Mark Brown
2022-08-01 13:45 ` Frieder Schrempf
2022-08-01 13:45 ` Frieder Schrempf
2022-08-01 15:16 ` Mark Brown
2022-08-01 15:16 ` Mark Brown
2022-08-01 13:15 ` [PATCH v2 3/8] arm64: dts: imx8mm-kontron: Adjust board and SoM model strings Frieder Schrempf
2022-08-01 13:15 ` Frieder Schrempf
2022-08-01 13:15 ` [PATCH v2 4/8] arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltage Frieder Schrempf
2022-08-01 13:15 ` Frieder Schrempf
2022-08-01 13:15 ` [PATCH v2 5/8] arm64: dts: imx8mm-kontron: Remove low DDRC operating point Frieder Schrempf
2022-08-01 13:15 ` Frieder Schrempf
2022-08-01 13:15 ` [PATCH v2 6/8] arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for PMIC regulator-names Frieder Schrempf
2022-08-01 13:15 ` Frieder Schrempf
2022-08-01 13:15 ` [PATCH v2 7/8] arm64: dts: imx8mm-kontron: Add SPI NOR partition layout Frieder Schrempf
2022-08-01 13:15 ` Frieder Schrempf
2022-08-01 13:15 ` [PATCH v2 8/8] arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S Frieder Schrempf
2022-08-01 13:15 ` Frieder Schrempf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220801131554.116795-1-frieder@fris.de \
--to=frieder@fris.de \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frieder.schrempf@kontron.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=yibin.gong@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.