From: Frieder Schrempf <frieder@fris.de> To: devicetree@vger.kernel.org, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com>, Frieder Schrempf <frieder.schrempf@kontron.de>, Heiko Thiery <heiko.thiery@gmail.com>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de> Subject: [PATCH v2 5/8] arm64: dts: imx8mm-kontron: Remove low DDRC operating point Date: Mon, 1 Aug 2022 15:15:49 +0200 [thread overview] Message-ID: <20220801131554.116795-6-frieder@fris.de> (raw) In-Reply-To: <20220801131554.116795-1-frieder@fris.de> From: Frieder Schrempf <frieder.schrempf@kontron.de> For some reason there is a problem with finding a DDR configuration that works on all operating points and all LPDDR4 types used on the SoM. Therefore the bootloader currently doesn't configure the lowest of the three operating points. Let's also skip this in the kernel devicetree to make sure it isn't used. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> --- Changes in v2: * none --- arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi index 77c074b491a6..2d0661cce89b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -46,10 +46,6 @@ &ddrc { ddrc_opp_table: opp-table { compatible = "operating-points-v2"; - opp-25M { - opp-hz = /bits/ 64 <25000000>; - }; - opp-100M { opp-hz = /bits/ 64 <100000000>; }; -- 2.37.1
WARNING: multiple messages have this Message-ID (diff)
From: Frieder Schrempf <frieder@fris.de> To: devicetree@vger.kernel.org, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com>, Frieder Schrempf <frieder.schrempf@kontron.de>, Heiko Thiery <heiko.thiery@gmail.com>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de> Subject: [PATCH v2 5/8] arm64: dts: imx8mm-kontron: Remove low DDRC operating point Date: Mon, 1 Aug 2022 15:15:49 +0200 [thread overview] Message-ID: <20220801131554.116795-6-frieder@fris.de> (raw) In-Reply-To: <20220801131554.116795-1-frieder@fris.de> From: Frieder Schrempf <frieder.schrempf@kontron.de> For some reason there is a problem with finding a DDR configuration that works on all operating points and all LPDDR4 types used on the SoM. Therefore the bootloader currently doesn't configure the lowest of the three operating points. Let's also skip this in the kernel devicetree to make sure it isn't used. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> --- Changes in v2: * none --- arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi index 77c074b491a6..2d0661cce89b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -46,10 +46,6 @@ &ddrc { ddrc_opp_table: opp-table { compatible = "operating-points-v2"; - opp-25M { - opp-hz = /bits/ 64 <25000000>; - }; - opp-100M { opp-hz = /bits/ 64 <100000000>; }; -- 2.37.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-08-01 13:16 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-01 13:15 [PATCH v2 0/8] arm64: dts: imx8mm-kontron: Improvements and OSM board support Frieder Schrempf 2022-08-01 13:15 ` Frieder Schrempf 2022-08-01 13:15 ` [PATCH v2 1/8] dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board Frieder Schrempf 2022-08-01 13:15 ` Frieder Schrempf 2022-08-01 13:15 ` [PATCH v2 2/8] dt-bindings: regulator: pca9450: Allow arbitrary regulator names Frieder Schrempf 2022-08-01 13:15 ` Frieder Schrempf 2022-08-01 13:21 ` Mark Brown 2022-08-01 13:21 ` Mark Brown 2022-08-01 13:45 ` Frieder Schrempf 2022-08-01 13:45 ` Frieder Schrempf 2022-08-01 15:16 ` Mark Brown 2022-08-01 15:16 ` Mark Brown 2022-08-01 13:15 ` [PATCH v2 3/8] arm64: dts: imx8mm-kontron: Adjust board and SoM model strings Frieder Schrempf 2022-08-01 13:15 ` Frieder Schrempf 2022-08-01 13:15 ` [PATCH v2 4/8] arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltage Frieder Schrempf 2022-08-01 13:15 ` Frieder Schrempf 2022-08-01 13:15 ` Frieder Schrempf [this message] 2022-08-01 13:15 ` [PATCH v2 5/8] arm64: dts: imx8mm-kontron: Remove low DDRC operating point Frieder Schrempf 2022-08-01 13:15 ` [PATCH v2 6/8] arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for PMIC regulator-names Frieder Schrempf 2022-08-01 13:15 ` Frieder Schrempf 2022-08-01 13:15 ` [PATCH v2 7/8] arm64: dts: imx8mm-kontron: Add SPI NOR partition layout Frieder Schrempf 2022-08-01 13:15 ` Frieder Schrempf 2022-08-01 13:15 ` [PATCH v2 8/8] arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S Frieder Schrempf 2022-08-01 13:15 ` Frieder Schrempf
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220801131554.116795-6-frieder@fris.de \ --to=frieder@fris.de \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=frieder.schrempf@kontron.de \ --cc=heiko.thiery@gmail.com \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=krzysztof.kozlowski@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.