[PATCH v2 4/7] drm/vc4: dpi: Support RGB565 format

From: Maxime Ripard <maxime@cerno.tech>
To: Emma Anholt <emma@anholt.net>, Maxime Ripard <mripard@kernel.org>,
	Rob Herring <robh@kernel.org>, Daniel Vetter <daniel@ffwll.ch>,
	Eric Anholt <eric@anholt.net>, David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	Joerg Quinten <aBUGSworstnightmare@gmail.com>,
	Chris Morgan <macromorgan@hotmail.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v2 4/7] drm/vc4: dpi: Support RGB565 format
Date: Thu, 20 Oct 2022 10:30:48 +0200	[thread overview]
Message-ID: <20221013-rpi-dpi-improvements-v2-4-7691903fb9c8@cerno.tech> (raw)
In-Reply-To: <20221013-rpi-dpi-improvements-v2-0-7691903fb9c8@cerno.tech>

From: Chris Morgan <macromorgan@hotmail.com>

The RGB565 format with padding over 24 bits
(MEDIA_BUS_FMT_RGB565_1X24_CPADHI) is supported by the vc4 DPI
controller. This is what the Geekworm MZP280 DPI display uses, so let's
add support for it in the DPI controller driver.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_dpi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_dpi.c b/drivers/gpu/drm/vc4/vc4_dpi.c
index 1f8f44b7b5a5..7da3dd1db50e 100644
--- a/drivers/gpu/drm/vc4/vc4_dpi.c
+++ b/drivers/gpu/drm/vc4/vc4_dpi.c
@@ -182,6 +182,10 @@ static void vc4_dpi_encoder_enable(struct drm_encoder *encoder)
 				dpi_c |= VC4_SET_FIELD(DPI_FORMAT_16BIT_565_RGB_3,
 						       DPI_FORMAT);
 				break;
+			case MEDIA_BUS_FMT_RGB565_1X24_CPADHI:
+				dpi_c |= VC4_SET_FIELD(DPI_FORMAT_16BIT_565_RGB_2,
+						       DPI_FORMAT);
+				break;
 			default:
 				DRM_ERROR("Unknown media bus format %d\n",
 					  bus_format);

-- 
b4 0.10.1
