[PATCH v7 03/20] gunyah: Common types and error codes for Gunyah hypercalls

From: Elliot Berman <quic_eberman@quicinc.com>
To: Bjorn Andersson <quic_bjorande@quicinc.com>,
	Elliot Berman <quic_eberman@quicinc.com>,
	Murali Nalajala <quic_mnalajal@quicinc.com>
Cc: Trilok Soni <quic_tsoni@quicinc.com>,
	Srivatsa Vaddagiri <quic_svaddagi@quicinc.com>,
	Carl van Schaik <quic_cvanscha@quicinc.com>,
	Prakruthi Deepak Heragu <quic_pheragu@quicinc.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Jonathan Corbet <corbet@lwn.net>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	Jassi Brar <jassisinghbrar@gmail.com>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Lorenzo Pieralisi <lpieralisi@kernel.org>,
	<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-doc@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-acpi@vger.kernel.org>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v7 03/20] gunyah: Common types and error codes for Gunyah hypercalls
Date: Mon, 21 Nov 2022 05:59:52 -0800	[thread overview]
Message-ID: <20221121140009.2353512-4-quic_eberman@quicinc.com> (raw)
In-Reply-To: <20221121140009.2353512-1-quic_eberman@quicinc.com>

Add architecture-independent standard error codes, types, and macros for
Gunyah hypercalls.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---
 MAINTAINERS            |  1 +
 include/linux/gunyah.h | 74 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 75 insertions(+)
 create mode 100644 include/linux/gunyah.h

diff --git a/MAINTAINERS b/MAINTAINERS
index ecca14b28b7c..c0d46ab5b199 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8945,6 +8945,7 @@ L:	linux-arm-msm@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml
 F:	Documentation/virt/gunyah/
+F:	include/linux/gunyah.h
 
 HABANALABS PCI DRIVER
 M:	Oded Gabbay <ogabbay@kernel.org>
diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h
new file mode 100644
index 000000000000..824e20a11d27
--- /dev/null
+++ b/include/linux/gunyah.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _GUNYAH_H
+#define _GUNYAH_H
+
+#include <linux/types.h>
+#include <linux/errno.h>
+
+/* Common Gunyah macros */
+#define GH_CAPID_INVAL	U64_MAX
+#define GH_VMID_ROOT_VM	0xff
+
+#define GH_ERROR_OK			0
+
+#define GH_ERROR_UNIMPLEMENTED		-1
+#define GH_ERROR_RETRY			-2
+
+#define GH_ERROR_ARG_INVAL		1
+#define GH_ERROR_ARG_SIZE		2
+#define GH_ERROR_ARG_ALIGN		3
+
+#define GH_ERROR_NOMEM			10
+
+#define GH_ERROR_ADDR_OVFL		20
+#define GH_ERROR_ADDR_UNFL		21
+#define GH_ERROR_ADDR_INVAL		22
+
+#define GH_ERROR_DENIED			30
+#define GH_ERROR_BUSY			31
+#define GH_ERROR_IDLE			32
+
+#define GH_ERROR_IRQ_BOUND		40
+#define GH_ERROR_IRQ_UNBOUND		41
+
+#define GH_ERROR_CSPACE_CAP_NULL	50
+#define GH_ERROR_CSPACE_CAP_REVOKED	51
+#define GH_ERROR_CSPACE_WRONG_OBJ_TYPE	52
+#define GH_ERROR_CSPACE_INSUF_RIGHTS	53
+#define GH_ERROR_CSPACE_FULL		54
+
+#define GH_ERROR_MSGQUEUE_EMPTY		60
+#define GH_ERROR_MSGQUEUE_FULL		61
+
+static inline int gh_remap_error(int gh_error)
+{
+	switch (gh_error) {
+	case GH_ERROR_OK:
+		return 0;
+	case GH_ERROR_NOMEM:
+		return -ENOMEM;
+	case GH_ERROR_DENIED:
+	case GH_ERROR_CSPACE_CAP_NULL:
+	case GH_ERROR_CSPACE_CAP_REVOKED:
+	case GH_ERROR_CSPACE_WRONG_OBJ_TYPE:
+	case GH_ERROR_CSPACE_INSUF_RIGHTS:
+	case GH_ERROR_CSPACE_FULL:
+		return -EACCES;
+	case GH_ERROR_BUSY:
+	case GH_ERROR_IDLE:
+		return -EBUSY;
+	case GH_ERROR_IRQ_BOUND:
+	case GH_ERROR_IRQ_UNBOUND:
+	case GH_ERROR_MSGQUEUE_FULL:
+	case GH_ERROR_MSGQUEUE_EMPTY:
+		return -EPERM;
+	default:
+		return -EINVAL;
+	}
+}
+
+#endif
-- 
2.25.1

