From: Nathan Barrett-Morrison <nathan.morrison@timesys.com> To: unlisted-recipients:; (no To-header on input) Cc: nathan.morrison@timesys.com, greg.malysa@timesys.com, Tudor Ambarus <tudor.ambarus@microchip.com>, Pratyush Yadav <pratyush@kernel.org>, Michael Walle <michael@walle.cc>, Miquel Raynal <miquel.raynal@bootlin.com>, Richard Weinberger <richard@nod.at>, Vignesh Raghavendra <vigneshr@ti.com>, linux-mtd@lists.infradead.org (open list:SPI NOR SUBSYSTEM), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v4 0/3] mtd: spi-nor: Extend SFDP to support additional octal modes as per latest JEDEC standard Date: Fri, 2 Dec 2022 08:55:36 -0500 [thread overview] Message-ID: <20221202135539.271936-1-nathan.morrison@timesys.com> (raw) In the latest JEDEC standard (JESD216F), there are now bitfields in the 4 byte address instruction table for 1S-1S-8S and 1S-8S-8S modes. This patchset adds support for checking the 4BAIT for these modes. v2: Move page program commands into sfdp.c instead of core.c, as this appears to conform more closely with spi-nor paradigm. Page program buswidth appears to be automatically determined, so let's follow suit and do the same. v3: - Added missing SPI_NOR_OCTAL_READ_1_8_8 to spi_nor_sfdp check in spi_nor_init_params_deprecated() - Convert IS25LX256 to 1S-8S-8S instead of 1S-1S-8S - Tested and confirmed both 1S-1S-8S and 1S-8S-8S work on IS25LX256 v4: - Remove SPI_NOR_OCTAL_READ_1_8_8, this was following a defunct path - Correct the IS25LX256's missing BFPT info via a fixup instead Nathan Barrett-Morrison (3): mtd: spi-nor: Extend SFDP 4byte address instruction lookup table with new octal modes as per JEDEC JESD216F mtd: spi-nor: Add additional octal-mode page program flags to be checked during SFDP 4BAIT parsing mtd: spi-nor: Add support for IS25LX256 operating in 1S-8S-8S octal read mode drivers/mtd/spi-nor/issi.c | 32 ++++++++++++++++++++++++++++++++ drivers/mtd/spi-nor/sfdp.c | 13 +++++++++++++ 2 files changed, 45 insertions(+) -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Cc: nathan.morrison@timesys.com, greg.malysa@timesys.com, Tudor Ambarus <tudor.ambarus@microchip.com>, Pratyush Yadav <pratyush@kernel.org>, Michael Walle <michael@walle.cc>, Miquel Raynal <miquel.raynal@bootlin.com>, Richard Weinberger <richard@nod.at>, Vignesh Raghavendra <vigneshr@ti.com>, linux-mtd@lists.infradead.org (open list:SPI NOR SUBSYSTEM), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v4 0/3] mtd: spi-nor: Extend SFDP to support additional octal modes as per latest JEDEC standard Date: Fri, 2 Dec 2022 08:55:36 -0500 [thread overview] Message-ID: <20221202135539.271936-1-nathan.morrison@timesys.com> (raw) In the latest JEDEC standard (JESD216F), there are now bitfields in the 4 byte address instruction table for 1S-1S-8S and 1S-8S-8S modes. This patchset adds support for checking the 4BAIT for these modes. v2: Move page program commands into sfdp.c instead of core.c, as this appears to conform more closely with spi-nor paradigm. Page program buswidth appears to be automatically determined, so let's follow suit and do the same. v3: - Added missing SPI_NOR_OCTAL_READ_1_8_8 to spi_nor_sfdp check in spi_nor_init_params_deprecated() - Convert IS25LX256 to 1S-8S-8S instead of 1S-1S-8S - Tested and confirmed both 1S-1S-8S and 1S-8S-8S work on IS25LX256 v4: - Remove SPI_NOR_OCTAL_READ_1_8_8, this was following a defunct path - Correct the IS25LX256's missing BFPT info via a fixup instead Nathan Barrett-Morrison (3): mtd: spi-nor: Extend SFDP 4byte address instruction lookup table with new octal modes as per JEDEC JESD216F mtd: spi-nor: Add additional octal-mode page program flags to be checked during SFDP 4BAIT parsing mtd: spi-nor: Add support for IS25LX256 operating in 1S-8S-8S octal read mode drivers/mtd/spi-nor/issi.c | 32 ++++++++++++++++++++++++++++++++ drivers/mtd/spi-nor/sfdp.c | 13 +++++++++++++ 2 files changed, 45 insertions(+) -- 2.30.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2022-12-02 13:55 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-12-02 13:55 Nathan Barrett-Morrison [this message] 2022-12-02 13:55 ` [PATCH v4 0/3] mtd: spi-nor: Extend SFDP to support additional octal modes as per latest JEDEC standard Nathan Barrett-Morrison 2022-12-02 13:55 ` [PATCH v4 1/3] mtd: spi-nor: Extend SFDP 4byte address instruction lookup table with new octal modes as per JEDEC JESD216F Nathan Barrett-Morrison 2022-12-02 13:55 ` Nathan Barrett-Morrison 2022-12-02 15:13 ` Michael Walle 2022-12-02 15:13 ` Michael Walle 2022-12-26 8:12 ` Tudor Ambarus 2022-12-26 8:12 ` Tudor Ambarus 2022-12-02 13:55 ` [PATCH v4 2/3] mtd: spi-nor: Add additional octal-mode page program flags to be checked during SFDP 4BAIT parsing Nathan Barrett-Morrison 2022-12-02 13:55 ` Nathan Barrett-Morrison 2022-12-02 15:16 ` Michael Walle 2022-12-02 15:16 ` Michael Walle 2022-12-26 8:14 ` Tudor Ambarus 2022-12-26 8:14 ` Tudor Ambarus 2022-12-02 13:55 ` [PATCH v4 3/3] mtd: spi-nor: Add support for IS25LX256 operating in 1S-8S-8S octal read mode Nathan Barrett-Morrison 2022-12-02 13:55 ` Nathan Barrett-Morrison 2022-12-02 15:20 ` Michael Walle 2022-12-02 15:20 ` Michael Walle 2022-12-03 4:32 ` kernel test robot 2022-12-03 4:32 ` kernel test robot 2022-12-03 7:44 ` kernel test robot 2022-12-03 7:44 ` kernel test robot 2022-12-26 8:04 ` Tudor Ambarus 2022-12-26 8:04 ` Tudor Ambarus 2022-12-26 8:17 ` Tudor Ambarus 2022-12-26 8:17 ` Tudor Ambarus 2022-12-27 12:37 ` Michael Walle 2022-12-27 12:37 ` Michael Walle 2022-12-27 13:24 ` Tudor Ambarus 2022-12-27 13:24 ` Tudor Ambarus
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221202135539.271936-1-nathan.morrison@timesys.com \ --to=nathan.morrison@timesys.com \ --cc=greg.malysa@timesys.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mtd@lists.infradead.org \ --cc=michael@walle.cc \ --cc=miquel.raynal@bootlin.com \ --cc=pratyush@kernel.org \ --cc=richard@nod.at \ --cc=tudor.ambarus@microchip.com \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.