All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brad Larson <blarson@amd.com>
To: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
	<linux-spi@vger.kernel.org>, <adrian.hunter@intel.com>,
	<alcooperx@gmail.com>, <andy.shevchenko@gmail.com>,
	<arnd@arndb.de>, <blarson@amd.com>, <brendan.higgins@linux.dev>,
	<briannorris@chromium.org>, <brijeshkumar.singh@amd.com>,
	<catalin.marinas@arm.com>, <davidgow@google.com>,
	<gsomlo@gmail.com>, <gerg@linux-m68k.org>, <krzk@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <lee@kernel.org>,
	<lee.jones@linaro.org>, <broonie@kernel.org>,
	<yamada.masahiro@socionext.com>, <p.zabel@pengutronix.de>,
	<piotrs@cadence.com>, <p.yadav@ti.com>, <rdunlap@infradead.org>,
	<robh+dt@kernel.org>, <samuel@sholland.org>,
	<fancer.lancer@gmail.com>, <skhan@linuxfoundation.org>,
	<suravee.suthikulpanit@amd.com>, <thomas.lendacky@amd.com>,
	<tonyhuang.sunplus@gmail.com>, <ulf.hansson@linaro.org>,
	<vaishnav.a@ti.com>, <will@kernel.org>,
	<devicetree@vger.kernel.org>
Subject: [PATCH v11 10/15] spi: dw: Add support for AMD Pensando Elba SoC
Date: Sat, 11 Mar 2023 16:44:40 -0800	[thread overview]
Message-ID: <20230312004445.15913-11-blarson@amd.com> (raw)
In-Reply-To: <20230312004445.15913-1-blarson@amd.com>

The AMD Pensando Elba SoC includes a DW apb_ssi v4 controller
with device specific chip-select control.  The Elba SoC
provides four chip-selects where the native DW IP supports
two chip-selects.  The Elba DW_SPI instance has two native
CS signals that are always overridden.

Signed-off-by: Brad Larson <blarson@amd.com>
---

v11 changes:
- Simplify dw_spi_elb_init by using syscon_regmap_lookup_by_phandle()

v10 changes:
- Delete struct dw_spi_elba, use regmap directly in priv

v9 changes:
- Add use of macros GENMASK() and BIT()
- Change ELBA_SPICS_SHIFT() to ELBA_SPICS_OFFSET()

---
 drivers/spi/spi-dw-mmio.c | 57 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 26c40ea6dd12..5851ecc6e1e9 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -53,6 +53,20 @@ struct dw_spi_mscc {
 	void __iomem        *spi_mst; /* Not sparx5 */
 };
 
+/*
+ * Elba SoC does not use ssi, pin override is used for cs 0,1 and
+ * gpios for cs 2,3 as defined in the device tree.
+ *
+ * cs:  |       1               0
+ * bit: |---3-------2-------1-------0
+ *      |  cs1   cs1_ovr   cs0   cs0_ovr
+ */
+#define ELBA_SPICS_REG			0x2468
+#define ELBA_SPICS_OFFSET(cs)		((cs) << 1)
+#define ELBA_SPICS_MASK(cs)		(GENMASK(1, 0) << ELBA_SPICS_OFFSET(cs))
+#define ELBA_SPICS_SET(cs, val)		\
+		((((val) << 1) | BIT(0)) << ELBA_SPICS_OFFSET(cs))
+
 /*
  * The Designware SPI controller (referred to as master in the documentation)
  * automatically deasserts chip select when the tx fifo is empty. The chip
@@ -237,6 +251,48 @@ static int dw_spi_canaan_k210_init(struct platform_device *pdev,
 	return 0;
 }
 
+static void dw_spi_elba_override_cs(struct regmap *syscon, int cs, int enable)
+{
+	regmap_update_bits(syscon, ELBA_SPICS_REG, ELBA_SPICS_MASK(cs),
+			   ELBA_SPICS_SET(cs, enable));
+}
+
+static void dw_spi_elba_set_cs(struct spi_device *spi, bool enable)
+{
+	struct dw_spi *dws = spi_master_get_devdata(spi->master);
+	struct dw_spi_mmio *dwsmmio = container_of(dws, struct dw_spi_mmio, dws);
+	struct regmap *syscon = dwsmmio->priv;
+	u8 cs;
+
+	cs = spi->chip_select;
+	if (cs < 2)
+		dw_spi_elba_override_cs(syscon, spi->chip_select, enable);
+
+	/*
+	 * The DW SPI controller needs a native CS bit selected to start
+	 * the serial engine.
+	 */
+	spi->chip_select = 0;
+	dw_spi_set_cs(spi, enable);
+	spi->chip_select = cs;
+}
+
+static int dw_spi_elba_init(struct platform_device *pdev,
+			    struct dw_spi_mmio *dwsmmio)
+{
+	struct regmap *syscon;
+
+	syscon = syscon_regmap_lookup_by_phandle(dev_of_node(&pdev->dev),
+						 "amd,pensando-elba-syscon");
+	if (IS_ERR(syscon))
+		return dev_err_probe(&pdev->dev, PTR_ERR(syscon),
+				     "syscon regmap lookup failed\n");
+	dwsmmio->priv = syscon;
+	dwsmmio->dws.set_cs = dw_spi_elba_set_cs;
+
+	return 0;
+}
+
 static int dw_spi_mmio_probe(struct platform_device *pdev)
 {
 	int (*init_func)(struct platform_device *pdev,
@@ -352,6 +408,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
 	{ .compatible = "intel,thunderbay-ssi", .data = dw_spi_intel_init},
 	{ .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init},
 	{ .compatible = "canaan,k210-spi", dw_spi_canaan_k210_init},
+	{ .compatible = "amd,pensando-elba-spi", .data = dw_spi_elba_init},
 	{ /* end of table */}
 };
 MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Brad Larson <blarson@amd.com>
To: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
	<linux-spi@vger.kernel.org>, <adrian.hunter@intel.com>,
	<alcooperx@gmail.com>, <andy.shevchenko@gmail.com>,
	<arnd@arndb.de>, <blarson@amd.com>, <brendan.higgins@linux.dev>,
	<briannorris@chromium.org>, <brijeshkumar.singh@amd.com>,
	<catalin.marinas@arm.com>, <davidgow@google.com>,
	<gsomlo@gmail.com>, <gerg@linux-m68k.org>, <krzk@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <lee@kernel.org>,
	<lee.jones@linaro.org>, <broonie@kernel.org>,
	<yamada.masahiro@socionext.com>, <p.zabel@pengutronix.de>,
	<piotrs@cadence.com>, <p.yadav@ti.com>, <rdunlap@infradead.org>,
	<robh+dt@kernel.org>, <samuel@sholland.org>,
	<fancer.lancer@gmail.com>, <skhan@linuxfoundation.org>,
	<suravee.suthikulpanit@amd.com>, <thomas.lendacky@amd.com>,
	<tonyhuang.sunplus@gmail.com>, <ulf.hansson@linaro.org>,
	<vaishnav.a@ti.com>, <will@kernel.org>,
	<devicetree@vger.kernel.org>
Subject: [PATCH v11 10/15] spi: dw: Add support for AMD Pensando Elba SoC
Date: Sat, 11 Mar 2023 16:44:40 -0800	[thread overview]
Message-ID: <20230312004445.15913-11-blarson@amd.com> (raw)
In-Reply-To: <20230312004445.15913-1-blarson@amd.com>

The AMD Pensando Elba SoC includes a DW apb_ssi v4 controller
with device specific chip-select control.  The Elba SoC
provides four chip-selects where the native DW IP supports
two chip-selects.  The Elba DW_SPI instance has two native
CS signals that are always overridden.

Signed-off-by: Brad Larson <blarson@amd.com>
---

v11 changes:
- Simplify dw_spi_elb_init by using syscon_regmap_lookup_by_phandle()

v10 changes:
- Delete struct dw_spi_elba, use regmap directly in priv

v9 changes:
- Add use of macros GENMASK() and BIT()
- Change ELBA_SPICS_SHIFT() to ELBA_SPICS_OFFSET()

---
 drivers/spi/spi-dw-mmio.c | 57 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 26c40ea6dd12..5851ecc6e1e9 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -53,6 +53,20 @@ struct dw_spi_mscc {
 	void __iomem        *spi_mst; /* Not sparx5 */
 };
 
+/*
+ * Elba SoC does not use ssi, pin override is used for cs 0,1 and
+ * gpios for cs 2,3 as defined in the device tree.
+ *
+ * cs:  |       1               0
+ * bit: |---3-------2-------1-------0
+ *      |  cs1   cs1_ovr   cs0   cs0_ovr
+ */
+#define ELBA_SPICS_REG			0x2468
+#define ELBA_SPICS_OFFSET(cs)		((cs) << 1)
+#define ELBA_SPICS_MASK(cs)		(GENMASK(1, 0) << ELBA_SPICS_OFFSET(cs))
+#define ELBA_SPICS_SET(cs, val)		\
+		((((val) << 1) | BIT(0)) << ELBA_SPICS_OFFSET(cs))
+
 /*
  * The Designware SPI controller (referred to as master in the documentation)
  * automatically deasserts chip select when the tx fifo is empty. The chip
@@ -237,6 +251,48 @@ static int dw_spi_canaan_k210_init(struct platform_device *pdev,
 	return 0;
 }
 
+static void dw_spi_elba_override_cs(struct regmap *syscon, int cs, int enable)
+{
+	regmap_update_bits(syscon, ELBA_SPICS_REG, ELBA_SPICS_MASK(cs),
+			   ELBA_SPICS_SET(cs, enable));
+}
+
+static void dw_spi_elba_set_cs(struct spi_device *spi, bool enable)
+{
+	struct dw_spi *dws = spi_master_get_devdata(spi->master);
+	struct dw_spi_mmio *dwsmmio = container_of(dws, struct dw_spi_mmio, dws);
+	struct regmap *syscon = dwsmmio->priv;
+	u8 cs;
+
+	cs = spi->chip_select;
+	if (cs < 2)
+		dw_spi_elba_override_cs(syscon, spi->chip_select, enable);
+
+	/*
+	 * The DW SPI controller needs a native CS bit selected to start
+	 * the serial engine.
+	 */
+	spi->chip_select = 0;
+	dw_spi_set_cs(spi, enable);
+	spi->chip_select = cs;
+}
+
+static int dw_spi_elba_init(struct platform_device *pdev,
+			    struct dw_spi_mmio *dwsmmio)
+{
+	struct regmap *syscon;
+
+	syscon = syscon_regmap_lookup_by_phandle(dev_of_node(&pdev->dev),
+						 "amd,pensando-elba-syscon");
+	if (IS_ERR(syscon))
+		return dev_err_probe(&pdev->dev, PTR_ERR(syscon),
+				     "syscon regmap lookup failed\n");
+	dwsmmio->priv = syscon;
+	dwsmmio->dws.set_cs = dw_spi_elba_set_cs;
+
+	return 0;
+}
+
 static int dw_spi_mmio_probe(struct platform_device *pdev)
 {
 	int (*init_func)(struct platform_device *pdev,
@@ -352,6 +408,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
 	{ .compatible = "intel,thunderbay-ssi", .data = dw_spi_intel_init},
 	{ .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init},
 	{ .compatible = "canaan,k210-spi", dw_spi_canaan_k210_init},
+	{ .compatible = "amd,pensando-elba-spi", .data = dw_spi_elba_init},
 	{ /* end of table */}
 };
 MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-03-12  0:47 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-12  0:44 [PATCH v11 00/15] Support AMD Pensando Elba SoC Brad Larson
2023-03-12  0:44 ` Brad Larson
2023-03-12  0:44 ` [PATCH v11 01/15] dt-bindings: arm: add AMD Pensando boards Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12  0:44 ` [PATCH v11 02/15] dt-bindings: mmc: cdns: Add AMD Pensando Elba SoC Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12 20:57   ` Krzysztof Kozlowski
2023-03-12 20:57     ` Krzysztof Kozlowski
2023-03-12  0:44 ` [PATCH v11 03/15] dt-bindings: spi: cdns: Add compatible for " Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12 20:57   ` Krzysztof Kozlowski
2023-03-12 20:57     ` Krzysztof Kozlowski
2023-03-12  0:44 ` [PATCH v11 04/15] dt-bindings: spi: dw: Add AMD Pensando Elba SoC SPI Controller Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12 21:42   ` Serge Semin
2023-03-12 21:42     ` Serge Semin
2023-03-12  0:44 ` [PATCH v11 05/15] dt-bindings: soc: amd: amd,pensando-elba-ctrl: Add Pensando SoC Controller Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12 20:58   ` Krzysztof Kozlowski
2023-03-12 20:58     ` Krzysztof Kozlowski
2023-03-12  0:44 ` [PATCH v11 06/15] MAINTAINERS: Add entry for AMD PENSANDO Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12  0:44 ` [PATCH v11 07/15] arm64: Add config for AMD Pensando SoC platforms Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12  0:44 ` [PATCH v11 08/15] arm64: dts: Add AMD Pensando Elba SoC support Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12  0:44 ` [PATCH v11 09/15] spi: cadence-quadspi: Add compatible for AMD Pensando Elba SoC Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12  0:44 ` Brad Larson [this message]
2023-03-12  0:44   ` [PATCH v11 10/15] spi: dw: Add support " Brad Larson
2023-03-12 21:16   ` Serge Semin
2023-03-12 21:16     ` Serge Semin
2023-03-12  0:44 ` [PATCH v11 11/15] mmc: sdhci-cadence: Enable device specific override of writel() Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12  0:44 ` [PATCH v11 12/15] mmc: sdhci-cadence: Support device specific init during probe Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12  0:44 ` [PATCH v11 13/15] mmc: sdhci-cadence: Add AMD Pensando Elba SoC support Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12  0:44 ` [PATCH v11 14/15] mmc: sdhci-cadence: Support mmc hardware reset Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12  0:44 ` [PATCH v11 15/15] soc: amd: Add support for AMD Pensando SoC Controller Brad Larson
2023-03-12  0:44   ` Brad Larson
2023-03-12  2:08   ` kernel test robot
2023-03-12  2:08     ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230312004445.15913-11-blarson@amd.com \
    --to=blarson@amd.com \
    --cc=adrian.hunter@intel.com \
    --cc=alcooperx@gmail.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=arnd@arndb.de \
    --cc=brendan.higgins@linux.dev \
    --cc=briannorris@chromium.org \
    --cc=brijeshkumar.singh@amd.com \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=davidgow@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=gerg@linux-m68k.org \
    --cc=gsomlo@gmail.com \
    --cc=krzk@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lee.jones@linaro.org \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=p.yadav@ti.com \
    --cc=p.zabel@pengutronix.de \
    --cc=piotrs@cadence.com \
    --cc=rdunlap@infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=skhan@linuxfoundation.org \
    --cc=suravee.suthikulpanit@amd.com \
    --cc=thomas.lendacky@amd.com \
    --cc=tonyhuang.sunplus@gmail.com \
    --cc=ulf.hansson@linaro.org \
    --cc=vaishnav.a@ti.com \
    --cc=will@kernel.org \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.