From: Dmitry Rokosov <ddrokosov@sberdevices.ru>
To: <neil.armstrong@linaro.org>, <jbrunet@baylibre.com>,
<mturquette@baylibre.com>, <sboyd@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<khilman@baylibre.com>, <martin.blumenstingl@googlemail.com>,
<conor+dt@kernel.org>
Cc: <kernel@sberdevices.ru>, <sdfw_system_team@sberdevices.ru>,
<rockosov@gmail.com>, <linux-amlogic@lists.infradead.org>,
<linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v1 0/6] arm64: dts: meson: a1: introduce several peripheral IPs
Date: Fri, 23 Jun 2023 11:22:01 +0300 [thread overview]
Message-ID: <20230623082201.7tfnpjvwi22omleq@CAB-WSD-L081021> (raw)
In-Reply-To: <20230607201641.20982-1-ddrokosov@sberdevices.ru>
Hello Neil, Krzysztof, Jerome, Martin, Rob and Conor,
Would you please review this patch? The latest modifications enable CLK,
EFUSE, USB, SDIO (WiFi), and UART (BT) functionality on A1 boards.
On Wed, Jun 07, 2023 at 11:16:35PM +0300, Dmitry Rokosov wrote:
> This patch series introduces device tree declarations for various
> peripheral IPs of the A1 SoC family, including clock controllers, EFUSE,
> USB, SPI Flash Controller, SDIO, and UART_AO:
> - CLK: A1 SoC has four types on the board, namely PLL, Peripherals,
> CPU, and Audio, but only Amlogic A1 PLL and Peripherals clock
> controllers are currently supported.
> - EFUSE: consists of a 4k bit One Time Programmable (OTP) memory
> divided into 32 128-bit blocks, and data is accessed using the APB
> bus through software or the Key-ladder integrated with the EFUSE
> block.
> - USB: only one USB 2.0 high-speed port is available in the A1 SoC,
> supporting both HOST and DEVICE modes for OTG.
> - SPI Flash Controller: 4-bit QPI/SPI NOR Flash or NAND FLASH
> controller.
> - SDIO: for WiFi/IEEE802.11 connection.
> - UART_AO: for Bluetooth connection.
>
> Alexey Romanov (1):
> arm64: dts: meson: a1: enable efuse controller and setup its clk
>
> Dmitry Rokosov (2):
> arm64: dts: meson: a1: introduce PLL and Peripherals clk controllers
> arm64: dts: meson: a1: support USB controller in OTG mode
>
> Jan Dakinevich (1):
> arm64: dts: meson: a1: add eMMC controller and its pins
>
> Martin Kurbanov (1):
> arm64: dts: meson: a1: introduce SPI Flash Controller
>
> Oleg Lyovin (1):
> arm64: dts: meson: a1: introduce UART_AO mux definitions
>
> arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 164 ++++++++++++++++++++++
> 1 file changed, 164 insertions(+)
>
> --
> 2.36.0
>
--
Thank you,
Dmitry
WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Rokosov <ddrokosov@sberdevices.ru>
To: <neil.armstrong@linaro.org>, <jbrunet@baylibre.com>,
<mturquette@baylibre.com>, <sboyd@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<khilman@baylibre.com>, <martin.blumenstingl@googlemail.com>,
<conor+dt@kernel.org>
Cc: <kernel@sberdevices.ru>, <sdfw_system_team@sberdevices.ru>,
<rockosov@gmail.com>, <linux-amlogic@lists.infradead.org>,
<linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v1 0/6] arm64: dts: meson: a1: introduce several peripheral IPs
Date: Fri, 23 Jun 2023 11:22:01 +0300 [thread overview]
Message-ID: <20230623082201.7tfnpjvwi22omleq@CAB-WSD-L081021> (raw)
In-Reply-To: <20230607201641.20982-1-ddrokosov@sberdevices.ru>
Hello Neil, Krzysztof, Jerome, Martin, Rob and Conor,
Would you please review this patch? The latest modifications enable CLK,
EFUSE, USB, SDIO (WiFi), and UART (BT) functionality on A1 boards.
On Wed, Jun 07, 2023 at 11:16:35PM +0300, Dmitry Rokosov wrote:
> This patch series introduces device tree declarations for various
> peripheral IPs of the A1 SoC family, including clock controllers, EFUSE,
> USB, SPI Flash Controller, SDIO, and UART_AO:
> - CLK: A1 SoC has four types on the board, namely PLL, Peripherals,
> CPU, and Audio, but only Amlogic A1 PLL and Peripherals clock
> controllers are currently supported.
> - EFUSE: consists of a 4k bit One Time Programmable (OTP) memory
> divided into 32 128-bit blocks, and data is accessed using the APB
> bus through software or the Key-ladder integrated with the EFUSE
> block.
> - USB: only one USB 2.0 high-speed port is available in the A1 SoC,
> supporting both HOST and DEVICE modes for OTG.
> - SPI Flash Controller: 4-bit QPI/SPI NOR Flash or NAND FLASH
> controller.
> - SDIO: for WiFi/IEEE802.11 connection.
> - UART_AO: for Bluetooth connection.
>
> Alexey Romanov (1):
> arm64: dts: meson: a1: enable efuse controller and setup its clk
>
> Dmitry Rokosov (2):
> arm64: dts: meson: a1: introduce PLL and Peripherals clk controllers
> arm64: dts: meson: a1: support USB controller in OTG mode
>
> Jan Dakinevich (1):
> arm64: dts: meson: a1: add eMMC controller and its pins
>
> Martin Kurbanov (1):
> arm64: dts: meson: a1: introduce SPI Flash Controller
>
> Oleg Lyovin (1):
> arm64: dts: meson: a1: introduce UART_AO mux definitions
>
> arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 164 ++++++++++++++++++++++
> 1 file changed, 164 insertions(+)
>
> --
> 2.36.0
>
--
Thank you,
Dmitry
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Rokosov <ddrokosov@sberdevices.ru>
To: <neil.armstrong@linaro.org>, <jbrunet@baylibre.com>,
<mturquette@baylibre.com>, <sboyd@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<khilman@baylibre.com>, <martin.blumenstingl@googlemail.com>,
<conor+dt@kernel.org>
Cc: <kernel@sberdevices.ru>, <sdfw_system_team@sberdevices.ru>,
<rockosov@gmail.com>, <linux-amlogic@lists.infradead.org>,
<linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v1 0/6] arm64: dts: meson: a1: introduce several peripheral IPs
Date: Fri, 23 Jun 2023 11:22:01 +0300 [thread overview]
Message-ID: <20230623082201.7tfnpjvwi22omleq@CAB-WSD-L081021> (raw)
In-Reply-To: <20230607201641.20982-1-ddrokosov@sberdevices.ru>
Hello Neil, Krzysztof, Jerome, Martin, Rob and Conor,
Would you please review this patch? The latest modifications enable CLK,
EFUSE, USB, SDIO (WiFi), and UART (BT) functionality on A1 boards.
On Wed, Jun 07, 2023 at 11:16:35PM +0300, Dmitry Rokosov wrote:
> This patch series introduces device tree declarations for various
> peripheral IPs of the A1 SoC family, including clock controllers, EFUSE,
> USB, SPI Flash Controller, SDIO, and UART_AO:
> - CLK: A1 SoC has four types on the board, namely PLL, Peripherals,
> CPU, and Audio, but only Amlogic A1 PLL and Peripherals clock
> controllers are currently supported.
> - EFUSE: consists of a 4k bit One Time Programmable (OTP) memory
> divided into 32 128-bit blocks, and data is accessed using the APB
> bus through software or the Key-ladder integrated with the EFUSE
> block.
> - USB: only one USB 2.0 high-speed port is available in the A1 SoC,
> supporting both HOST and DEVICE modes for OTG.
> - SPI Flash Controller: 4-bit QPI/SPI NOR Flash or NAND FLASH
> controller.
> - SDIO: for WiFi/IEEE802.11 connection.
> - UART_AO: for Bluetooth connection.
>
> Alexey Romanov (1):
> arm64: dts: meson: a1: enable efuse controller and setup its clk
>
> Dmitry Rokosov (2):
> arm64: dts: meson: a1: introduce PLL and Peripherals clk controllers
> arm64: dts: meson: a1: support USB controller in OTG mode
>
> Jan Dakinevich (1):
> arm64: dts: meson: a1: add eMMC controller and its pins
>
> Martin Kurbanov (1):
> arm64: dts: meson: a1: introduce SPI Flash Controller
>
> Oleg Lyovin (1):
> arm64: dts: meson: a1: introduce UART_AO mux definitions
>
> arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 164 ++++++++++++++++++++++
> 1 file changed, 164 insertions(+)
>
> --
> 2.36.0
>
--
Thank you,
Dmitry
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2023-06-23 8:22 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-07 20:16 [PATCH v1 0/6] arm64: dts: meson: a1: introduce several peripheral IPs Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-07 20:16 ` [PATCH v1 1/6] arm64: dts: meson: a1: introduce PLL and Peripherals clk controllers Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-25 21:00 ` Martin Blumenstingl
2023-06-25 21:00 ` Martin Blumenstingl
2023-06-25 21:00 ` Martin Blumenstingl
2023-06-28 14:18 ` Dmitry Rokosov
2023-06-28 14:18 ` Dmitry Rokosov
2023-06-28 14:18 ` Dmitry Rokosov
2023-06-28 20:51 ` Martin Blumenstingl
2023-06-28 20:51 ` Martin Blumenstingl
2023-06-28 20:51 ` Martin Blumenstingl
2023-06-07 20:16 ` [PATCH v1 2/6] arm64: dts: meson: a1: support USB controller in OTG mode Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-07 20:16 ` [PATCH v1 3/6] arm64: dts: meson: a1: enable efuse controller and setup its clk Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-25 20:50 ` Martin Blumenstingl
2023-06-25 20:50 ` Martin Blumenstingl
2023-06-25 20:50 ` Martin Blumenstingl
2023-06-28 14:20 ` Dmitry Rokosov
2023-06-28 14:20 ` Dmitry Rokosov
2023-06-28 14:20 ` Dmitry Rokosov
2023-06-07 20:16 ` [PATCH v1 4/6] arm64: dts: meson: a1: introduce SPI Flash Controller Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-25 21:03 ` Martin Blumenstingl
2023-06-25 21:03 ` Martin Blumenstingl
2023-06-25 21:03 ` Martin Blumenstingl
2023-06-28 14:23 ` Dmitry Rokosov
2023-06-28 14:23 ` Dmitry Rokosov
2023-06-28 14:23 ` Dmitry Rokosov
2023-06-07 20:16 ` [PATCH v1 5/6] arm64: dts: meson: a1: introduce UART_AO mux definitions Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-25 21:07 ` Martin Blumenstingl
2023-06-25 21:07 ` Martin Blumenstingl
2023-06-25 21:07 ` Martin Blumenstingl
2023-06-26 13:34 ` neil.armstrong
2023-06-26 13:34 ` neil.armstrong
2023-06-26 13:34 ` neil.armstrong
2023-06-28 14:51 ` Dmitry Rokosov
2023-06-28 14:51 ` Dmitry Rokosov
2023-06-28 14:51 ` Dmitry Rokosov
2023-06-28 14:49 ` Dmitry Rokosov
2023-06-28 14:49 ` Dmitry Rokosov
2023-06-28 14:49 ` Dmitry Rokosov
2023-06-07 20:16 ` [PATCH v1 6/6] arm64: dts: meson: a1: add eMMC controller and its pins Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-07 20:16 ` Dmitry Rokosov
2023-06-25 21:11 ` Martin Blumenstingl
2023-06-25 21:11 ` Martin Blumenstingl
2023-06-25 21:11 ` Martin Blumenstingl
2023-06-26 13:36 ` neil.armstrong
2023-06-26 13:36 ` neil.armstrong
2023-06-26 13:36 ` neil.armstrong
2023-06-28 14:28 ` Dmitry Rokosov
2023-06-28 14:28 ` Dmitry Rokosov
2023-06-28 14:28 ` Dmitry Rokosov
2023-06-23 8:22 ` Dmitry Rokosov [this message]
2023-06-23 8:22 ` [PATCH v1 0/6] arm64: dts: meson: a1: introduce several peripheral IPs Dmitry Rokosov
2023-06-23 8:22 ` Dmitry Rokosov
2023-06-23 8:49 ` Krzysztof Kozlowski
2023-06-23 8:49 ` Krzysztof Kozlowski
2023-06-23 8:49 ` Krzysztof Kozlowski
2023-06-23 11:23 ` Dmitry Rokosov
2023-06-23 11:23 ` Dmitry Rokosov
2023-06-23 11:23 ` Dmitry Rokosov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230623082201.7tfnpjvwi22omleq@CAB-WSD-L081021 \
--to=ddrokosov@sberdevices.ru \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=kernel@sberdevices.ru \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
--cc=rockosov@gmail.com \
--cc=sboyd@kernel.org \
--cc=sdfw_system_team@sberdevices.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.