From: Ulf Hansson <ulf.hansson@linaro.org> To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net> Cc: Ulf Hansson <ulf.hansson@linaro.org>, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Andy Gross <agross@kernel.org>, linux-arm-msm@vger.kernel.org Subject: [PATCH v2 08/17] pmdomain: qcom: Move Kconfig options to the pmdomain subsystem Date: Fri, 15 Sep 2023 11:19:54 +0200 [thread overview] Message-ID: <20230915092003.658361-9-ulf.hansson@linaro.org> (raw) In-Reply-To: <20230915092003.658361-1-ulf.hansson@linaro.org> The Kconfig options belongs closer to the corresponding implementations, hence let's move them from the soc subsystem to the pmdomain subsystem. Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: <linux-arm-msm@vger.kernel.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- drivers/pmdomain/Kconfig | 1 + drivers/pmdomain/qcom/Kconfig | 41 +++++++++++++++++++++++++++++++++++ drivers/soc/qcom/Kconfig | 37 ------------------------------- 3 files changed, 42 insertions(+), 37 deletions(-) create mode 100644 drivers/pmdomain/qcom/Kconfig diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig index b1d9dc7d71e3..c91fdd40163a 100644 --- a/drivers/pmdomain/Kconfig +++ b/drivers/pmdomain/Kconfig @@ -7,5 +7,6 @@ source "drivers/pmdomain/apple/Kconfig" source "drivers/pmdomain/bcm/Kconfig" source "drivers/pmdomain/imx/Kconfig" source "drivers/pmdomain/mediatek/Kconfig" +source "drivers/pmdomain/qcom/Kconfig" endmenu diff --git a/drivers/pmdomain/qcom/Kconfig b/drivers/pmdomain/qcom/Kconfig new file mode 100644 index 000000000000..3d3948eabef0 --- /dev/null +++ b/drivers/pmdomain/qcom/Kconfig @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "Qualcomm PM Domains" + +config QCOM_CPR + tristate "QCOM Core Power Reduction (CPR) support" + depends on ARCH_QCOM && HAS_IOMEM + select PM_OPP + select REGMAP + help + Say Y here to enable support for the CPR hardware found on Qualcomm + SoCs like QCS404. + + This driver populates CPU OPPs tables and makes adjustments to the + tables based on feedback from the CPR hardware. If you want to do + CPUfrequency scaling say Y here. + + To compile this driver as a module, choose M here: the module will + be called qcom-cpr + +config QCOM_RPMHPD + tristate "Qualcomm RPMh Power domain driver" + depends on QCOM_RPMH && QCOM_COMMAND_DB + help + QCOM RPMh Power domain driver to support power-domains with + performance states. The driver communicates a performance state + value to RPMh which then translates it into corresponding voltage + for the voltage rail. + +config QCOM_RPMPD + tristate "Qualcomm RPM Power domain driver" + depends on PM && OF + depends on QCOM_SMD_RPM + select PM_GENERIC_DOMAINS + select PM_GENERIC_DOMAINS_OF + help + QCOM RPM Power domain driver to support power-domains with + performance states. The driver communicates a performance state + value to RPM which then translates it into corresponding voltage + for the voltage rail. + +endmenu diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 715348869d04..b3634e10f6f5 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -26,22 +26,6 @@ config QCOM_COMMAND_DB resource on a RPM-hardened platform must use this database to get SoC specific identifier and information for the shared resources. -config QCOM_CPR - tristate "QCOM Core Power Reduction (CPR) support" - depends on ARCH_QCOM && HAS_IOMEM - select PM_OPP - select REGMAP - help - Say Y here to enable support for the CPR hardware found on Qualcomm - SoCs like QCS404. - - This driver populates CPU OPPs tables and makes adjustments to the - tables based on feedback from the CPR hardware. If you want to do - CPUfrequency scaling say Y here. - - To compile this driver as a module, choose M here: the module will - be called qcom-cpr - config QCOM_GENI_SE tristate "QCOM GENI Serial Engine Driver" depends on ARCH_QCOM || COMPILE_TEST @@ -157,27 +141,6 @@ config QCOM_RPMH of hardware components aggregate requests for these resources and help apply the aggregated state on the resource. -config QCOM_RPMHPD - tristate "Qualcomm RPMh Power domain driver" - depends on QCOM_RPMH && QCOM_COMMAND_DB - help - QCOM RPMh Power domain driver to support power-domains with - performance states. The driver communicates a performance state - value to RPMh which then translates it into corresponding voltage - for the voltage rail. - -config QCOM_RPMPD - tristate "Qualcomm RPM Power domain driver" - depends on PM && OF - depends on QCOM_SMD_RPM - select PM_GENERIC_DOMAINS - select PM_GENERIC_DOMAINS_OF - help - QCOM RPM Power domain driver to support power-domains with - performance states. The driver communicates a performance state - value to RPM which then translates it into corresponding voltage - for the voltage rail. - config QCOM_SMEM tristate "Qualcomm Shared Memory Manager (SMEM)" depends on ARCH_QCOM || COMPILE_TEST -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Ulf Hansson <ulf.hansson@linaro.org> To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net> Cc: Ulf Hansson <ulf.hansson@linaro.org>, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Andy Gross <agross@kernel.org>, linux-arm-msm@vger.kernel.org Subject: [PATCH v2 08/17] pmdomain: qcom: Move Kconfig options to the pmdomain subsystem Date: Fri, 15 Sep 2023 11:19:54 +0200 [thread overview] Message-ID: <20230915092003.658361-9-ulf.hansson@linaro.org> (raw) In-Reply-To: <20230915092003.658361-1-ulf.hansson@linaro.org> The Kconfig options belongs closer to the corresponding implementations, hence let's move them from the soc subsystem to the pmdomain subsystem. Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: <linux-arm-msm@vger.kernel.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- drivers/pmdomain/Kconfig | 1 + drivers/pmdomain/qcom/Kconfig | 41 +++++++++++++++++++++++++++++++++++ drivers/soc/qcom/Kconfig | 37 ------------------------------- 3 files changed, 42 insertions(+), 37 deletions(-) create mode 100644 drivers/pmdomain/qcom/Kconfig diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig index b1d9dc7d71e3..c91fdd40163a 100644 --- a/drivers/pmdomain/Kconfig +++ b/drivers/pmdomain/Kconfig @@ -7,5 +7,6 @@ source "drivers/pmdomain/apple/Kconfig" source "drivers/pmdomain/bcm/Kconfig" source "drivers/pmdomain/imx/Kconfig" source "drivers/pmdomain/mediatek/Kconfig" +source "drivers/pmdomain/qcom/Kconfig" endmenu diff --git a/drivers/pmdomain/qcom/Kconfig b/drivers/pmdomain/qcom/Kconfig new file mode 100644 index 000000000000..3d3948eabef0 --- /dev/null +++ b/drivers/pmdomain/qcom/Kconfig @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "Qualcomm PM Domains" + +config QCOM_CPR + tristate "QCOM Core Power Reduction (CPR) support" + depends on ARCH_QCOM && HAS_IOMEM + select PM_OPP + select REGMAP + help + Say Y here to enable support for the CPR hardware found on Qualcomm + SoCs like QCS404. + + This driver populates CPU OPPs tables and makes adjustments to the + tables based on feedback from the CPR hardware. If you want to do + CPUfrequency scaling say Y here. + + To compile this driver as a module, choose M here: the module will + be called qcom-cpr + +config QCOM_RPMHPD + tristate "Qualcomm RPMh Power domain driver" + depends on QCOM_RPMH && QCOM_COMMAND_DB + help + QCOM RPMh Power domain driver to support power-domains with + performance states. The driver communicates a performance state + value to RPMh which then translates it into corresponding voltage + for the voltage rail. + +config QCOM_RPMPD + tristate "Qualcomm RPM Power domain driver" + depends on PM && OF + depends on QCOM_SMD_RPM + select PM_GENERIC_DOMAINS + select PM_GENERIC_DOMAINS_OF + help + QCOM RPM Power domain driver to support power-domains with + performance states. The driver communicates a performance state + value to RPM which then translates it into corresponding voltage + for the voltage rail. + +endmenu diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 715348869d04..b3634e10f6f5 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -26,22 +26,6 @@ config QCOM_COMMAND_DB resource on a RPM-hardened platform must use this database to get SoC specific identifier and information for the shared resources. -config QCOM_CPR - tristate "QCOM Core Power Reduction (CPR) support" - depends on ARCH_QCOM && HAS_IOMEM - select PM_OPP - select REGMAP - help - Say Y here to enable support for the CPR hardware found on Qualcomm - SoCs like QCS404. - - This driver populates CPU OPPs tables and makes adjustments to the - tables based on feedback from the CPR hardware. If you want to do - CPUfrequency scaling say Y here. - - To compile this driver as a module, choose M here: the module will - be called qcom-cpr - config QCOM_GENI_SE tristate "QCOM GENI Serial Engine Driver" depends on ARCH_QCOM || COMPILE_TEST @@ -157,27 +141,6 @@ config QCOM_RPMH of hardware components aggregate requests for these resources and help apply the aggregated state on the resource. -config QCOM_RPMHPD - tristate "Qualcomm RPMh Power domain driver" - depends on QCOM_RPMH && QCOM_COMMAND_DB - help - QCOM RPMh Power domain driver to support power-domains with - performance states. The driver communicates a performance state - value to RPMh which then translates it into corresponding voltage - for the voltage rail. - -config QCOM_RPMPD - tristate "Qualcomm RPM Power domain driver" - depends on PM && OF - depends on QCOM_SMD_RPM - select PM_GENERIC_DOMAINS - select PM_GENERIC_DOMAINS_OF - help - QCOM RPM Power domain driver to support power-domains with - performance states. The driver communicates a performance state - value to RPM which then translates it into corresponding voltage - for the voltage rail. - config QCOM_SMEM tristate "Qualcomm Shared Memory Manager (SMEM)" depends on ARCH_QCOM || COMPILE_TEST -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-09-15 9:21 UTC|newest] Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-09-15 9:19 [PATCH v2 00/17] pmdomain: Move Kconfig options/files to the pmdomain subsystem Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:19 ` [PATCH v2 01/17] pmdomain: Prepare to move Kconfig files into " Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 10:07 ` Geert Uytterhoeven 2023-09-15 10:07 ` Geert Uytterhoeven 2023-09-15 9:19 ` [PATCH v2 02/17] pmdomain: actions: Move Kconfig file to " Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:19 ` [PATCH v2 03/17] pmdomain: amlogic: Move Kconfig options " Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:19 ` [PATCH v2 04/17] pmdomain: apple: Move Kconfig option " Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:45 ` Eric Curtin 2023-09-15 9:45 ` Eric Curtin 2023-09-15 11:46 ` Ulf Hansson 2023-09-15 11:46 ` Ulf Hansson 2023-09-15 10:21 ` Neal Gompa 2023-09-15 10:21 ` Neal Gompa 2023-09-15 9:19 ` [PATCH v2 05/17] pmdomain: bcm: Move Kconfig options " Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 13:15 ` Philippe Mathieu-Daudé 2023-09-15 13:15 ` Philippe Mathieu-Daudé 2023-09-15 16:30 ` Florian Fainelli 2023-09-15 16:30 ` Florian Fainelli 2023-09-15 9:19 ` [PATCH v2 06/17] pmdomain: imx: " Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-17 23:07 ` Peng Fan 2023-09-17 23:07 ` Peng Fan 2023-09-15 9:19 ` [PATCH v2 07/17] pmdomain: mediatek: " Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson [this message] 2023-09-15 9:19 ` [PATCH v2 08/17] pmdomain: qcom: " Ulf Hansson 2023-09-15 9:19 ` [PATCH v2 09/17] pmdomain: renesas: " Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:19 ` [PATCH v2 10/17] pmdomain: rockchip: Move Kconfig option " Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:19 ` [PATCH v2 11/17] pmdomain: samsung: " Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:19 ` [PATCH v2 12/17] pmdomain: st: Add a Kconfig option for the ux500 power domain Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:19 ` [PATCH v2 13/17] pmdomain: starfive: Move Kconfig file to the pmdomain subsystem Ulf Hansson 2023-09-15 9:19 ` Ulf Hansson 2023-09-15 9:29 ` Conor Dooley 2023-09-15 9:29 ` Conor Dooley 2023-09-15 11:42 ` Ulf Hansson 2023-09-15 11:42 ` Ulf Hansson 2023-09-15 9:20 ` [PATCH v2 14/17] pmdomain: sunxi: Move Kconfig option " Ulf Hansson 2023-09-15 9:20 ` Ulf Hansson 2023-09-15 9:20 ` [PATCH v2 15/17] pmdomain: tegra: " Ulf Hansson 2023-09-15 9:20 ` Ulf Hansson 2023-09-15 9:20 ` [PATCH v2 16/17] pmdomain: ti: Move and add Kconfig options " Ulf Hansson 2023-09-15 9:20 ` Ulf Hansson 2023-09-19 9:09 ` Dhruva Gole 2023-09-19 9:09 ` Dhruva Gole 2023-09-15 9:20 ` [PATCH v2 17/17] pmdomain: xilinx: Move Kconfig option " Ulf Hansson 2023-09-15 9:20 ` Ulf Hansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230915092003.658361-9-ulf.hansson@linaro.org \ --to=ulf.hansson@linaro.org \ --cc=agross@kernel.org \ --cc=andersson@kernel.org \ --cc=arnd@arndb.de \ --cc=konrad.dybcio@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=olof@lixom.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.