All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen@kernel.org>
To: "Théo Lebrun" <theo.lebrun@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Roger Quadros <rogerq@kernel.org>,
	Pawel Laszczak <pawell@cadence.com>, Nishanth Menon <nm@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 4/6] usb: cdns3: support power-off of controller when in host role
Date: Tue, 14 Nov 2023 16:38:38 +0800	[thread overview]
Message-ID: <20231114083838.GC64573@nchen-desktop> (raw)
In-Reply-To: <20231113-j7200-usb-suspend-v1-4-ad1ee714835c@bootlin.com>

On 23-11-13 15:26:59, Théo Lebrun wrote:
> The controller is not being reconfigured at resume. Change resume to
> redo hardware config if quirk CDNS3_RESET_ON_RESUME is active.

Current logic has power off judgement, see cdns3_controller_resume for
detail.

> 
> Platform data comes from the parent driver (eg cdns3-ti).
> 
> The quirk should be passed if the platform driver knows that the
> controller might be in reset state at resume. We do NOT reconfigure the
> hardware without this quirk to avoid losing state if we did a suspend
> without reset.
> 
> If the quirk is on, we notify the xHCI subsystem that:
> 
> 1. We reset on resume. It will therefore redo the xHC init & trigger
>    such message as "root hub lost power or was reset" in dmesg.
> 
> 2. It should disable/enable clocks on suspend/resume. This does not
>    matter on our platform as xhci-plat does not get access to any clock
>    but it would be the right thing to do if we indeed had such clocks.
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
>  drivers/usb/cdns3/core.h |  1 +
>  drivers/usb/cdns3/host.c | 20 ++++++++++++++++++++
>  2 files changed, 21 insertions(+)
> 
> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
> index 81a9c9d6be08..7487067ba23f 100644
> --- a/drivers/usb/cdns3/core.h
> +++ b/drivers/usb/cdns3/core.h
> @@ -44,6 +44,7 @@ struct cdns3_platform_data {
>  			bool suspend, bool wakeup);
>  	unsigned long quirks;
>  #define CDNS3_DEFAULT_PM_RUNTIME_ALLOW	BIT(0)
> +#define CDNS3_RESET_ON_RESUME		BIT(1)
>  };
>  
>  /**
> diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
> index 6164fc4c96a4..a81019a7c8cc 100644
> --- a/drivers/usb/cdns3/host.c
> +++ b/drivers/usb/cdns3/host.c
> @@ -88,6 +88,9 @@ static int __cdns_host_init(struct cdns *cdns)
>  		goto err1;
>  	}
>  
> +	if (cdns->pdata && cdns->pdata->quirks & CDNS3_RESET_ON_RESUME)
> +		cdns->xhci_plat_data->quirks |= XHCI_RESET_ON_RESUME | XHCI_SUSPEND_RESUME_CLKS;
> +

If you set this flag, how could you support the USB remote wakeup
request? In that case, the USB bus does not expect re-enumeration.

>  	if (cdns->pdata && (cdns->pdata->quirks & CDNS3_DEFAULT_PM_RUNTIME_ALLOW))
>  		cdns->xhci_plat_data->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
>  
> @@ -124,6 +127,18 @@ static void cdns_host_exit(struct cdns *cdns)
>  	cdns_drd_host_off(cdns);
>  }
>  
> +static int cdns_host_suspend(struct cdns *cdns, bool do_wakeup)
> +{
> +	if (!do_wakeup)
> +		cdns_drd_host_off(cdns);
> +	return 0;
> +}
> +
> +static int cdns_host_resume(struct cdns *cdns, bool hibernated)
> +{
> +	return cdns_drd_host_on(cdns);

This one will redo if controller's power is off, please consider both
on and power situation.

> +}
> +
>  int cdns_host_init(struct cdns *cdns)
>  {
>  	struct cdns_role_driver *rdrv;
> @@ -137,6 +152,11 @@ int cdns_host_init(struct cdns *cdns)
>  	rdrv->state	= CDNS_ROLE_STATE_INACTIVE;
>  	rdrv->name	= "host";
>  
> +	if (cdns->pdata && cdns->pdata->quirks & CDNS3_RESET_ON_RESUME) {
> +		rdrv->suspend = cdns_host_suspend;
> +		rdrv->resume = cdns_host_resume;
> +	}
> +
>  	cdns->roles[USB_ROLE_HOST] = rdrv;
>  
>  	return 0;
> 
> -- 
> 2.41.0
> 

-- 

Thanks,
Peter Chen

WARNING: multiple messages have this Message-ID (diff)
From: Peter Chen <peter.chen@kernel.org>
To: "Théo Lebrun" <theo.lebrun@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Roger Quadros <rogerq@kernel.org>,
	Pawel Laszczak <pawell@cadence.com>, Nishanth Menon <nm@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 4/6] usb: cdns3: support power-off of controller when in host role
Date: Tue, 14 Nov 2023 16:38:38 +0800	[thread overview]
Message-ID: <20231114083838.GC64573@nchen-desktop> (raw)
In-Reply-To: <20231113-j7200-usb-suspend-v1-4-ad1ee714835c@bootlin.com>

On 23-11-13 15:26:59, Théo Lebrun wrote:
> The controller is not being reconfigured at resume. Change resume to
> redo hardware config if quirk CDNS3_RESET_ON_RESUME is active.

Current logic has power off judgement, see cdns3_controller_resume for
detail.

> 
> Platform data comes from the parent driver (eg cdns3-ti).
> 
> The quirk should be passed if the platform driver knows that the
> controller might be in reset state at resume. We do NOT reconfigure the
> hardware without this quirk to avoid losing state if we did a suspend
> without reset.
> 
> If the quirk is on, we notify the xHCI subsystem that:
> 
> 1. We reset on resume. It will therefore redo the xHC init & trigger
>    such message as "root hub lost power or was reset" in dmesg.
> 
> 2. It should disable/enable clocks on suspend/resume. This does not
>    matter on our platform as xhci-plat does not get access to any clock
>    but it would be the right thing to do if we indeed had such clocks.
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
>  drivers/usb/cdns3/core.h |  1 +
>  drivers/usb/cdns3/host.c | 20 ++++++++++++++++++++
>  2 files changed, 21 insertions(+)
> 
> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
> index 81a9c9d6be08..7487067ba23f 100644
> --- a/drivers/usb/cdns3/core.h
> +++ b/drivers/usb/cdns3/core.h
> @@ -44,6 +44,7 @@ struct cdns3_platform_data {
>  			bool suspend, bool wakeup);
>  	unsigned long quirks;
>  #define CDNS3_DEFAULT_PM_RUNTIME_ALLOW	BIT(0)
> +#define CDNS3_RESET_ON_RESUME		BIT(1)
>  };
>  
>  /**
> diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
> index 6164fc4c96a4..a81019a7c8cc 100644
> --- a/drivers/usb/cdns3/host.c
> +++ b/drivers/usb/cdns3/host.c
> @@ -88,6 +88,9 @@ static int __cdns_host_init(struct cdns *cdns)
>  		goto err1;
>  	}
>  
> +	if (cdns->pdata && cdns->pdata->quirks & CDNS3_RESET_ON_RESUME)
> +		cdns->xhci_plat_data->quirks |= XHCI_RESET_ON_RESUME | XHCI_SUSPEND_RESUME_CLKS;
> +

If you set this flag, how could you support the USB remote wakeup
request? In that case, the USB bus does not expect re-enumeration.

>  	if (cdns->pdata && (cdns->pdata->quirks & CDNS3_DEFAULT_PM_RUNTIME_ALLOW))
>  		cdns->xhci_plat_data->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
>  
> @@ -124,6 +127,18 @@ static void cdns_host_exit(struct cdns *cdns)
>  	cdns_drd_host_off(cdns);
>  }
>  
> +static int cdns_host_suspend(struct cdns *cdns, bool do_wakeup)
> +{
> +	if (!do_wakeup)
> +		cdns_drd_host_off(cdns);
> +	return 0;
> +}
> +
> +static int cdns_host_resume(struct cdns *cdns, bool hibernated)
> +{
> +	return cdns_drd_host_on(cdns);

This one will redo if controller's power is off, please consider both
on and power situation.

> +}
> +
>  int cdns_host_init(struct cdns *cdns)
>  {
>  	struct cdns_role_driver *rdrv;
> @@ -137,6 +152,11 @@ int cdns_host_init(struct cdns *cdns)
>  	rdrv->state	= CDNS_ROLE_STATE_INACTIVE;
>  	rdrv->name	= "host";
>  
> +	if (cdns->pdata && cdns->pdata->quirks & CDNS3_RESET_ON_RESUME) {
> +		rdrv->suspend = cdns_host_suspend;
> +		rdrv->resume = cdns_host_resume;
> +	}
> +
>  	cdns->roles[USB_ROLE_HOST] = rdrv;
>  
>  	return 0;
> 
> -- 
> 2.41.0
> 

-- 

Thanks,
Peter Chen

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-11-14  8:39 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-13 14:26 [PATCH 0/6] usb: cdns: fix suspend on J7200 by assuming reset on resume Théo Lebrun
2023-11-13 14:26 ` Théo Lebrun
2023-11-13 14:26 ` [PATCH 1/6] dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible Théo Lebrun
2023-11-13 14:26   ` Théo Lebrun
2023-11-13 19:58   ` Conor Dooley
2023-11-13 19:58     ` Conor Dooley
2023-11-13 14:26 ` [PATCH 2/6] usb: cdns3-ti: move reg writes from probe into an init_hw helper Théo Lebrun
2023-11-13 14:26   ` Théo Lebrun
2023-11-15 11:33   ` Roger Quadros
2023-11-15 11:33     ` Roger Quadros
2023-11-15 14:23     ` Théo Lebrun
2023-11-15 14:23       ` Théo Lebrun
2023-11-16 12:00       ` Roger Quadros
2023-11-16 12:00         ` Roger Quadros
2023-11-13 14:26 ` [PATCH 3/6] usb: cdns3-ti: add suspend/resume procedures for J7200 Théo Lebrun
2023-11-13 14:26   ` Théo Lebrun
2023-11-13 15:39   ` Gregory CLEMENT
2023-11-13 15:39     ` Gregory CLEMENT
2023-11-14 11:13     ` Théo Lebrun
2023-11-14 11:13       ` Théo Lebrun
2023-11-15 11:37   ` Roger Quadros
2023-11-15 11:37     ` Roger Quadros
2023-11-15 15:02     ` Théo Lebrun
2023-11-15 15:02       ` Théo Lebrun
2023-11-16 12:40       ` Roger Quadros
2023-11-16 12:40         ` Roger Quadros
2023-11-16 18:56         ` Théo Lebrun
2023-11-16 18:56           ` Théo Lebrun
2023-11-16 21:44           ` Roger Quadros
2023-11-16 21:44             ` Roger Quadros
2023-11-17 10:17             ` Théo Lebrun
2023-11-17 10:17               ` Théo Lebrun
2023-11-17 11:51               ` Roger Quadros
2023-11-17 11:51                 ` Roger Quadros
2023-11-17 14:20                 ` Théo Lebrun
2023-11-17 14:20                   ` Théo Lebrun
2023-11-18 10:41                   ` Roger Quadros
2023-11-18 10:41                     ` Roger Quadros
2023-11-22 22:23                   ` Kevin Hilman
2023-11-22 22:23                     ` Kevin Hilman
2023-11-23  9:51                     ` Théo Lebrun
2023-11-23  9:51                       ` Théo Lebrun
2023-11-26 22:36                       ` Kevin Hilman
2023-11-26 22:36                         ` Kevin Hilman
2023-11-27 13:25                         ` Théo Lebrun
2023-11-27 13:25                           ` Théo Lebrun
2023-12-12 18:26                           ` Kevin Hilman
2023-12-12 18:26                             ` Kevin Hilman
2023-12-12 19:31                             ` Alan Stern
2023-12-12 19:31                               ` Alan Stern
2023-11-13 14:26 ` [PATCH 4/6] usb: cdns3: support power-off of controller when in host role Théo Lebrun
2023-11-13 14:26   ` Théo Lebrun
2023-11-14  8:38   ` Peter Chen [this message]
2023-11-14  8:38     ` Peter Chen
2023-11-14 11:10     ` Théo Lebrun
2023-11-14 11:10       ` Théo Lebrun
2023-11-17  3:38       ` Peter Chen
2023-11-17  3:38         ` Peter Chen
2023-11-17  9:58         ` Théo Lebrun
2023-11-17  9:58           ` Théo Lebrun
2023-11-20  5:44           ` Peter Chen
2023-11-20  5:44             ` Peter Chen
2023-11-13 14:27 ` [PATCH 5/6] usb: cdns3-ti: notify cdns core that hardware resets across suspend on J7200 Théo Lebrun
2023-11-13 14:27   ` Théo Lebrun
2023-11-13 14:27 ` [PATCH 6/6] arm64: dts: ti: k3-j7200: use J7200-specific USB compatible Théo Lebrun
2023-11-13 14:27   ` Théo Lebrun
2023-11-14 10:01   ` Gregory CLEMENT
2023-11-14 10:01     ` Gregory CLEMENT
2023-11-14 11:14     ` Théo Lebrun
2023-11-14 11:14       ` Théo Lebrun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231114083838.GC64573@nchen-desktop \
    --to=peter.chen@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=pawell@cadence.com \
    --cc=robh+dt@kernel.org \
    --cc=rogerq@kernel.org \
    --cc=theo.lebrun@bootlin.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.