Re: [PATCH v8 1/3] dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM controller

From: Andre Przywara <andre.przywara@arm.com>
To: Aleksandr Shubin <privatesub2@gmail.com>
Cc: linux-kernel@vger.kernel.org,
	"Conor Dooley" <conor.dooley@microchip.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Chen-Yu Tsai" <wens@csie.org>,
	"Jernej Skrabec" <jernej.skrabec@gmail.com>,
	"Samuel Holland" <samuel@sholland.org>,
	"Paul Walmsley" <paul.walmsley@sifive.com>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Marc Kleine-Budde" <mkl@pengutronix.de>,
	"Maksim Kiselev" <bigunclemax@gmail.com>,
	"Cristian Ciocaltea" <cristian.ciocaltea@collabora.com>,
	"John Watts" <contact@jookia.org>,
	"Cheo Fusi" <fusibrandon13@gmail.com>,
	linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-riscv@lists.infradead.org
Subject: Re: [PATCH v8 1/3] dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM controller
Date: Wed, 31 Jan 2024 14:52:44 +0000	[thread overview]
Message-ID: <20240131145244.4f534bac@donnerap.manchester.arm.com> (raw)
In-Reply-To: <20240131125920.2879433-2-privatesub2@gmail.com>

On Wed, 31 Jan 2024 15:59:14 +0300
Aleksandr Shubin <privatesub2@gmail.com> wrote:

Hi,

> Allwinner's D1, T113-S3 and R329 SoCs have a new pwm
> controller witch is different from the previous pwm-sun4i.
> 
> The D1 and T113 are identical in terms of peripherals,
> they differ only in the architecture of the CPU core, and
> even share the majority of their DT. Because of that,
> using the same compatible makes sense.
> The R329 is a different SoC though, and should have
> a different compatible string added, especially as there
> is a difference in the number of channels.
> 
> D1 and T113s SoCs have one PWM controller with 8 channels.
> R329 SoC has two PWM controllers in both power domains, one of
> them has 9 channels (CPUX one) and the other has 6 (CPUS one).
> 
> Add a device tree binding for them.
> 
> Signed-off-by: Aleksandr Shubin <privatesub2@gmail.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> ---
>  .../bindings/pwm/allwinner,sun20i-pwm.yaml    | 88 +++++++++++++++++++
>  1 file changed, 88 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> new file mode 100644
> index 000000000000..716f75776006
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/allwinner,sun20i-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner D1, T113-S3 and R329 PWM
> +
> +maintainers:
> +  - Aleksandr Shubin <privatesub2@gmail.com>
> +  - Brandon Cheo Fusi <fusibrandon13@gmail.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: allwinner,sun20i-d1-pwm
> +      - items:
> +          - const: allwinner,sun20i-r329-pwm
> +          - const: allwinner,sun20i-d1-pwm
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#pwm-cells":
> +    const: 3
> +
> +  clocks:
> +    items:
> +      - description: Bus clock
> +      - description: 24 MHz oscillator
> +      - description: APB0 clock
> +
> +  clock-names:
> +    items:
> +      - const: bus
> +      - const: hosc
> +      - const: apb0
> +
> +  resets:
> +    maxItems: 1
> +
> +  allwinner,pwm-channels:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: The number of PWM channels configured for this instance
> +    enum: [6, 9]
> +
> +allOf:
> +  - $ref: pwm.yaml#
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: allwinner,sun20i-r329-pwm
> +
> +    then:
> +      required:
> +        - allwinner,pwm-channels
> +
> +    else:
> +      properties:
> +        allwinner,pwm-channels: false

Do we really need to be that strict?
If something compatible to D1 pops up in the future, just with a different
number of channels, we would need a new compatible string.
If we would leave this else branch out, we could just specify some
number differing from the default, and be good.
The number of channels really looks like a parameter to the IP, it's
modelled like this in the manual (PCR: 0x0100 + 0x0000 + N * 0x0020).

Cheers,
Andre

> +
> +unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#pwm-cells"
> +  - clocks
> +  - clock-names
> +  - resets
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/sun20i-d1-ccu.h>
> +    #include <dt-bindings/reset/sun20i-d1-ccu.h>
> +
> +    pwm: pwm@2000c00 {
> +      compatible = "allwinner,sun20i-d1-pwm";
> +      reg = <0x02000c00 0x400>;
> +      clocks = <&ccu CLK_BUS_PWM>, <&dcxo>, <&ccu CLK_APB0>;
> +      clock-names = "bus", "hosc", "apb0";
> +      resets = <&ccu RST_BUS_PWM>;
> +      #pwm-cells = <0x3>;
> +    };
> +
> +...

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel