From: Judith Mendez <jm@ti.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Wadim Egorov <w.egorov@phytec.de>, Francesco Dolcini <francesco.dolcini@toradex.com> Subject: [PATCH v3 3/9] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Date: Tue, 13 Feb 2024 17:56:55 -0600 [thread overview] Message-ID: <20240213235701.2438513-4-jm@ti.com> (raw) In-Reply-To: <20240213235701.2438513-1-jm@ti.com> From: Nitin Yadav <n-yadav@ti.com> Add support for 32GB eMMC card on AM62A7 SK. Includes adding mmc0 pins settings. Add mmc0 alias for sdhci0 in k3-am62a7-sk.dts. Signed-off-by: Nitin Yadav <n-yadav@ti.com> Signed-off-by: Judith Mendez <jm@ti.com> --- Changes since V3: - No change --- arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 26 +++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index f5ae91bf1bdb..c99b2e90f76d 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -20,6 +20,7 @@ aliases { serial0 = &wkup_uart0; serial2 = &main_uart0; serial3 = &main_uart1; + mmc0 = &sdhci0; mmc1 = &sdhci1; }; @@ -263,6 +264,22 @@ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ >; }; + main_mmc0_pins_default: main-mmc0-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */ + AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ + AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ + AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ + AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ + AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ + AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ + AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ @@ -550,6 +567,15 @@ &main_i2c2 { clock-frequency = <400000>; }; +&sdhci0 { + /* eMMC */ + status = "okay"; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + disable-wp; +}; + &sdhci1 { /* SD/MMC */ status = "okay"; -- 2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Judith Mendez <jm@ti.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Wadim Egorov <w.egorov@phytec.de>, Francesco Dolcini <francesco.dolcini@toradex.com> Subject: [PATCH v3 3/9] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Date: Tue, 13 Feb 2024 17:56:55 -0600 [thread overview] Message-ID: <20240213235701.2438513-4-jm@ti.com> (raw) In-Reply-To: <20240213235701.2438513-1-jm@ti.com> From: Nitin Yadav <n-yadav@ti.com> Add support for 32GB eMMC card on AM62A7 SK. Includes adding mmc0 pins settings. Add mmc0 alias for sdhci0 in k3-am62a7-sk.dts. Signed-off-by: Nitin Yadav <n-yadav@ti.com> Signed-off-by: Judith Mendez <jm@ti.com> --- Changes since V3: - No change --- arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 26 +++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index f5ae91bf1bdb..c99b2e90f76d 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -20,6 +20,7 @@ aliases { serial0 = &wkup_uart0; serial2 = &main_uart0; serial3 = &main_uart1; + mmc0 = &sdhci0; mmc1 = &sdhci1; }; @@ -263,6 +264,22 @@ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ >; }; + main_mmc0_pins_default: main-mmc0-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */ + AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ + AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ + AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ + AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ + AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ + AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ + AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ @@ -550,6 +567,15 @@ &main_i2c2 { clock-frequency = <400000>; }; +&sdhci0 { + /* eMMC */ + status = "okay"; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + disable-wp; +}; + &sdhci1 { /* SD/MMC */ status = "okay"; -- 2.43.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-13 23:57 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-02-13 23:56 [PATCH v3 0/9] Fix MMC properties on Sitara K3 devices Judith Mendez 2024-02-13 23:56 ` Judith Mendez 2024-02-13 23:56 ` [PATCH v3 1/9] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance Judith Mendez 2024-02-13 23:56 ` Judith Mendez 2024-02-13 23:56 ` [PATCH v3 2/9] arm64: dts: ti: k3-am62a-main: Add sdhci2 instance Judith Mendez 2024-02-13 23:56 ` Judith Mendez 2024-02-13 23:56 ` Judith Mendez [this message] 2024-02-13 23:56 ` [PATCH v3 3/9] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Judith Mendez 2024-02-13 23:56 ` [PATCH v3 4/9] arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC Judith Mendez 2024-02-13 23:56 ` Judith Mendez 2024-02-13 23:56 ` [PATCH v3 5/9] arm64: dts: ti: k3-am62p: Add " Judith Mendez 2024-02-13 23:56 ` Judith Mendez 2024-02-13 23:56 ` [PATCH v3 6/9] arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs Judith Mendez 2024-02-13 23:56 ` Judith Mendez 2024-02-13 23:56 ` [PATCH v3 7/9] arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes Judith Mendez 2024-02-13 23:56 ` Judith Mendez 2024-02-13 23:57 ` [PATCH v3 8/9] arm64: dts: ti: k3-am6*: Fix bus-width " Judith Mendez 2024-02-13 23:57 ` Judith Mendez 2024-02-13 23:57 ` [PATCH v3 9/9] arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node Judith Mendez 2024-02-13 23:57 ` Judith Mendez 2024-02-14 10:26 ` [PATCH v3 0/9] Fix MMC properties on Sitara K3 devices Wadim Egorov 2024-02-14 10:26 ` Wadim Egorov 2024-02-20 4:03 ` Vignesh Raghavendra 2024-02-20 4:03 ` Vignesh Raghavendra
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240213235701.2438513-4-jm@ti.com \ --to=jm@ti.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=francesco.dolcini@toradex.com \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=robh+dt@kernel.org \ --cc=vigneshr@ti.com \ --cc=w.egorov@phytec.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.