From: Bartosz Golaszewski <brgl@bgdev.pl> To: Marcel Holtmann <marcel@holtmann.org>, Luiz Augusto von Dentz <luiz.dentz@gmail.com>, "David S . Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Kalle Valo <kvalo@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, Bjorn Helgaas <bhelgaas@google.com>, Bartosz Golaszewski <brgl@bgdev.pl>, Saravana Kannan <saravanak@google.com>, Geert Uytterhoeven <geert+renesas@glider.be>, Arnd Bergmann <arnd@arndb.de>, Neil Armstrong <neil.armstrong@linaro.org>, Marek Szyprowski <m.szyprowski@samsung.com>, Alex Elder <elder@linaro.org>, Srini Kandagatla <srinivas.kandagatla@linaro.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Abel Vesa <abel.vesa@linaro.org>, Manivannan Sadhasivam <mani@kernel.org>, Lukas Wunner <lukas@wunner.de>, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org, linux-pm@vger.kernel.org, Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Subject: [PATCH v5 09/18] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391 Date: Fri, 16 Feb 2024 21:32:06 +0100 [thread overview] Message-ID: <20240216203215.40870-10-brgl@bgdev.pl> (raw) In-Reply-To: <20240216203215.40870-1-brgl@bgdev.pl> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Add a node for the PMU module of the QCA6391 present on the RB5 board. Assign its LDO power outputs to the existing Bluetooth module. Add a node for the PCIe port to sm8250.dtsi and define the WLAN node on it in the board's .dts and also make it consume the power outputs of the PMU. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> --- arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 123 +++++++++++++++++++++-- arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 ++ 2 files changed, 122 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index cd0db4f31d4a..3331a3e5aaa8 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -108,6 +108,87 @@ lt9611_3v3: lt9611-3v3 { regulator-always-on; }; + qca6390-pmu { + compatible = "qcom,qca6390-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>, <&wlan_en_state>; + + vddaon-supply = <&vreg_s6a_0p95>; + vddpmu-supply = <&vreg_s2f_0p95>; + vddrfa0p95-supply = <&vreg_s2f_0p95>; + vddrfa1p3-supply = <&vreg_s8c_1p3>; + vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddpcie1p3-supply = <&vreg_s8c_1p3>; + vddpcie1p9-supply = <&vreg_s5a_1p9>; + vddio-supply = <&vreg_s4a_1p8>; + + wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + regulator-min-microvolt = <760000>; + regulator-max-microvolt = <840000>; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + regulator-min-microvolt = <540000>; + regulator-max-microvolt = <840000>; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + regulator-min-microvolt = <760000>; + regulator-max-microvolt = <840000>; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <890000>; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <890000>; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + regulator-min-microvolt = <760000>; + regulator-max-microvolt = <840000>; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + regulator-min-microvolt = <1187000>; + regulator-max-microvolt = <1313000>; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + }; + }; + }; + thermal-zones { conn-thermal { polling-delay-passive = <0>; @@ -734,6 +815,23 @@ &pcie0_phy { vdda-pll-supply = <&vreg_l9a_1p2>; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1101"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie1 { status = "okay"; }; @@ -1303,6 +1401,14 @@ sdc2_card_det_n: sd-card-det-n-state { function = "gpio"; bias-pull-up; }; + + wlan_en_state: wlan-default-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <16>; + output-low; + bias-pull-up; + }; }; &uart6 { @@ -1311,17 +1417,12 @@ &uart6 { bluetooth { compatible = "qcom,qca6390-bt"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_en_state>; - - enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; - - vddio-supply = <&vreg_s4a_1p8>; - vddpmu-supply = <&vreg_s2f_0p95>; - vddaon-supply = <&vreg_s6a_0p95>; - vddrfa0p9-supply = <&vreg_s2f_0p95>; - vddrfa1p3-supply = <&vreg_s8c_1p3>; - vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index f3c70b87efad..29d2ccb5b389 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2203,6 +2203,16 @@ pcie0: pcie@1c00000 { dma-coherent; status = "disabled"; + + pcieport0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + bus-range = <0x01 0xff>; + }; }; pcie0_phy: phy@1c06000 { -- 2.40.1
WARNING: multiple messages have this Message-ID (diff)
From: Bartosz Golaszewski <brgl@bgdev.pl> To: Marcel Holtmann <marcel@holtmann.org>, Luiz Augusto von Dentz <luiz.dentz@gmail.com>, "David S . Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Kalle Valo <kvalo@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, Bjorn Helgaas <bhelgaas@google.com>, Bartosz Golaszewski <brgl@bgdev.pl>, Saravana Kannan <saravanak@google.com>, Geert Uytterhoeven <geert+renesas@glider.be>, Arnd Bergmann <arnd@arndb.de>, Neil Armstrong <neil.armstrong@linaro.org>, Marek Szyprowski <m.szyprowski@samsung.com>, Alex Elder <elder@linaro.org>, Srini Kandagatla <srinivas.kandagatla@linaro.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Abel Vesa <abel.vesa@linaro.org>, Manivannan Sadhasivam <mani@kernel.org>, Lukas Wunner <lukas@wunner.de>, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org, linux-pm@vger.kernel.org, Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Subject: [PATCH v5 09/18] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391 Date: Fri, 16 Feb 2024 21:32:06 +0100 [thread overview] Message-ID: <20240216203215.40870-10-brgl@bgdev.pl> (raw) In-Reply-To: <20240216203215.40870-1-brgl@bgdev.pl> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Add a node for the PMU module of the QCA6391 present on the RB5 board. Assign its LDO power outputs to the existing Bluetooth module. Add a node for the PCIe port to sm8250.dtsi and define the WLAN node on it in the board's .dts and also make it consume the power outputs of the PMU. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> --- arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 123 +++++++++++++++++++++-- arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 ++ 2 files changed, 122 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index cd0db4f31d4a..3331a3e5aaa8 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -108,6 +108,87 @@ lt9611_3v3: lt9611-3v3 { regulator-always-on; }; + qca6390-pmu { + compatible = "qcom,qca6390-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>, <&wlan_en_state>; + + vddaon-supply = <&vreg_s6a_0p95>; + vddpmu-supply = <&vreg_s2f_0p95>; + vddrfa0p95-supply = <&vreg_s2f_0p95>; + vddrfa1p3-supply = <&vreg_s8c_1p3>; + vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddpcie1p3-supply = <&vreg_s8c_1p3>; + vddpcie1p9-supply = <&vreg_s5a_1p9>; + vddio-supply = <&vreg_s4a_1p8>; + + wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + regulator-min-microvolt = <760000>; + regulator-max-microvolt = <840000>; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + regulator-min-microvolt = <540000>; + regulator-max-microvolt = <840000>; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + regulator-min-microvolt = <760000>; + regulator-max-microvolt = <840000>; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <890000>; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <890000>; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + regulator-min-microvolt = <760000>; + regulator-max-microvolt = <840000>; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + regulator-min-microvolt = <1187000>; + regulator-max-microvolt = <1313000>; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + }; + }; + }; + thermal-zones { conn-thermal { polling-delay-passive = <0>; @@ -734,6 +815,23 @@ &pcie0_phy { vdda-pll-supply = <&vreg_l9a_1p2>; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1101"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie1 { status = "okay"; }; @@ -1303,6 +1401,14 @@ sdc2_card_det_n: sd-card-det-n-state { function = "gpio"; bias-pull-up; }; + + wlan_en_state: wlan-default-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <16>; + output-low; + bias-pull-up; + }; }; &uart6 { @@ -1311,17 +1417,12 @@ &uart6 { bluetooth { compatible = "qcom,qca6390-bt"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_en_state>; - - enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; - - vddio-supply = <&vreg_s4a_1p8>; - vddpmu-supply = <&vreg_s2f_0p95>; - vddaon-supply = <&vreg_s6a_0p95>; - vddrfa0p9-supply = <&vreg_s2f_0p95>; - vddrfa1p3-supply = <&vreg_s8c_1p3>; - vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index f3c70b87efad..29d2ccb5b389 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2203,6 +2203,16 @@ pcie0: pcie@1c00000 { dma-coherent; status = "disabled"; + + pcieport0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + bus-range = <0x01 0xff>; + }; }; pcie0_phy: phy@1c06000 { -- 2.40.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-16 20:33 UTC|newest] Thread overview: 159+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-02-16 20:31 [PATCH v5 00/18] power: sequencing: implement the subsystem and add first users Bartosz Golaszewski 2024-02-16 20:31 ` Bartosz Golaszewski 2024-02-16 20:31 ` [PATCH v5 01/18] of: Add cleanup.h based auto release via __free(device_node) markings Bartosz Golaszewski 2024-02-16 20:31 ` Bartosz Golaszewski 2024-02-16 20:36 ` power: sequencing: implement the subsystem and add first users bluez.test.bot 2024-02-16 20:31 ` [PATCH v5 02/18] arm64: defconfig: enable ath12k as a module Bartosz Golaszewski 2024-02-16 20:31 ` Bartosz Golaszewski 2024-02-19 7:31 ` Krzysztof Kozlowski 2024-02-19 7:31 ` Krzysztof Kozlowski 2024-02-19 7:56 ` Bartosz Golaszewski 2024-02-19 7:56 ` Bartosz Golaszewski 2024-02-16 20:32 ` [PATCH v5 03/18] dt-bindings: regulator: describe the PMU module of the QCA6390 package Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-17 15:48 ` Mark Brown 2024-02-17 15:48 ` Mark Brown 2024-02-17 18:32 ` Bartosz Golaszewski 2024-02-17 18:32 ` Bartosz Golaszewski 2024-02-17 20:43 ` Mark Brown 2024-02-17 20:43 ` Mark Brown 2024-02-19 7:32 ` Krzysztof Kozlowski 2024-02-19 7:32 ` Krzysztof Kozlowski 2024-02-19 12:53 ` Bartosz Golaszewski 2024-02-19 12:53 ` Bartosz Golaszewski 2024-02-19 21:23 ` Krzysztof Kozlowski 2024-02-19 21:23 ` Krzysztof Kozlowski 2024-02-19 7:34 ` Krzysztof Kozlowski 2024-02-19 7:34 ` Krzysztof Kozlowski 2024-02-16 20:32 ` [PATCH v5 04/18] dt-bindings: net: bluetooth: qualcomm: describe regulators for QCA6390 Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-19 7:34 ` Krzysztof Kozlowski 2024-02-19 7:34 ` Krzysztof Kozlowski 2024-02-16 20:32 ` [PATCH v5 05/18] dt-bindings: new: wireless: qcom,ath11k: describe the ath11k on QCA6390 Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-16 20:32 ` [PATCH v5 06/18] dt-bindings: new: wireless: describe the ath12k PCI module Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-17 6:34 ` Kalle Valo 2024-02-17 6:34 ` Kalle Valo 2024-02-17 18:30 ` Bartosz Golaszewski 2024-02-17 18:30 ` Bartosz Golaszewski 2024-02-17 20:02 ` Jeff Johnson 2024-02-17 20:02 ` Jeff Johnson 2024-02-19 7:38 ` Krzysztof Kozlowski 2024-02-19 7:38 ` Krzysztof Kozlowski 2024-02-22 23:56 ` Rob Herring 2024-02-22 23:56 ` Rob Herring 2024-02-16 20:32 ` [PATCH v5 07/18] arm64: dts: qcom: sm8550-qrd: add the Wifi node Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-16 20:32 ` [PATCH v5 08/18] arm64: dts: qcom: sm8650-qrd: " Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-16 23:09 ` Dmitry Baryshkov 2024-02-16 23:09 ` Dmitry Baryshkov 2024-02-17 18:53 ` Bartosz Golaszewski 2024-02-17 18:53 ` Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski [this message] 2024-02-16 20:32 ` [PATCH v5 09/18] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391 Bartosz Golaszewski 2024-02-19 18:03 ` Mark Brown 2024-02-19 18:03 ` Mark Brown 2024-02-19 18:48 ` Bartosz Golaszewski 2024-02-19 18:48 ` Bartosz Golaszewski 2024-02-19 19:59 ` Mark Brown 2024-02-19 19:59 ` Mark Brown 2024-02-20 11:16 ` Bartosz Golaszewski 2024-02-20 11:16 ` Bartosz Golaszewski 2024-02-20 13:31 ` Mark Brown 2024-02-20 13:31 ` Mark Brown 2024-02-20 13:38 ` Bartosz Golaszewski 2024-02-20 13:38 ` Bartosz Golaszewski 2024-02-20 13:48 ` Mark Brown 2024-02-20 13:48 ` Mark Brown 2024-02-20 13:51 ` Bartosz Golaszewski 2024-02-20 13:51 ` Bartosz Golaszewski 2024-02-20 14:10 ` Mark Brown 2024-02-20 14:10 ` Mark Brown 2024-02-20 16:30 ` Dmitry Baryshkov 2024-02-20 16:30 ` Dmitry Baryshkov 2024-02-20 17:53 ` Bartosz Golaszewski 2024-02-20 17:53 ` Bartosz Golaszewski 2024-02-20 18:11 ` Dmitry Baryshkov 2024-02-20 18:11 ` Dmitry Baryshkov 2024-02-16 20:32 ` [PATCH v5 10/18] PCI: hold the rescan mutex when scanning for the first time Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-16 20:32 ` [PATCH v5 11/18] PCI/pwrctl: reuse the OF node for power controlled devices Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-16 20:32 ` [PATCH v5 12/18] PCI/pwrctl: create platform devices for child OF nodes of the port node Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-16 20:32 ` [PATCH v5 13/18] PCI/pwrctl: add PCI power control core code Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-16 20:32 ` [PATCH v5 14/18] PCI/pwrctl: add a power control driver for WCN7850 Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-18 12:25 ` kernel test robot 2024-02-19 17:49 ` Mark Brown 2024-02-19 17:49 ` Mark Brown 2024-02-20 11:22 ` Bartosz Golaszewski 2024-02-20 11:22 ` Bartosz Golaszewski 2024-02-20 12:47 ` Mark Brown 2024-02-20 12:47 ` Mark Brown 2024-02-20 21:21 ` Konrad Dybcio 2024-02-20 21:21 ` Konrad Dybcio 2024-02-20 23:44 ` Mark Brown 2024-02-20 23:44 ` Mark Brown 2024-02-22 9:22 ` Bartosz Golaszewski 2024-02-22 9:22 ` Bartosz Golaszewski 2024-02-22 12:21 ` Mark Brown 2024-02-22 12:21 ` Mark Brown 2024-02-22 12:26 ` Bartosz Golaszewski 2024-02-22 12:26 ` Bartosz Golaszewski 2024-02-22 13:15 ` Mark Brown 2024-02-22 13:15 ` Mark Brown 2024-02-22 13:26 ` Bartosz Golaszewski 2024-02-22 13:26 ` Bartosz Golaszewski 2024-02-16 20:32 ` [PATCH v5 15/18] power: sequencing: implement the pwrseq core Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-18 16:26 ` kernel test robot 2024-02-16 20:32 ` [PATCH v5 16/18] power: pwrseq: add a driver for the QCA6390 PMU module Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-16 23:17 ` Dmitry Baryshkov 2024-02-16 23:17 ` Dmitry Baryshkov 2024-02-17 19:09 ` Bartosz Golaszewski 2024-02-17 19:09 ` Bartosz Golaszewski 2024-02-16 20:32 ` [PATCH v5 17/18] Bluetooth: qca: use the power sequencer for QCA6390 Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-16 20:32 ` [PATCH v5 18/18] PCI/pwrctl: add a PCI power control driver for power sequenced devices Bartosz Golaszewski 2024-02-16 20:32 ` Bartosz Golaszewski 2024-02-18 12:53 ` [PATCH v5 00/18] power: sequencing: implement the subsystem and add first users Dmitry Baryshkov 2024-02-18 12:53 ` Dmitry Baryshkov 2024-02-19 8:14 ` Neil Armstrong 2024-02-19 8:14 ` Neil Armstrong 2024-02-19 9:22 ` Dmitry Baryshkov 2024-02-19 9:22 ` Dmitry Baryshkov 2024-02-19 9:42 ` neil.armstrong 2024-02-19 9:42 ` neil.armstrong 2024-02-19 10:26 ` Dmitry Baryshkov 2024-02-19 10:26 ` Dmitry Baryshkov 2024-02-19 12:23 ` Bartosz Golaszewski 2024-02-19 12:23 ` Bartosz Golaszewski 2024-02-19 12:33 ` Dmitry Baryshkov 2024-02-19 12:33 ` Dmitry Baryshkov 2024-02-19 17:18 ` neil.armstrong 2024-02-19 17:18 ` neil.armstrong 2024-02-19 22:21 ` Dmitry Baryshkov 2024-02-19 22:21 ` Dmitry Baryshkov 2024-02-22 11:00 ` Bartosz Golaszewski 2024-02-22 11:00 ` Bartosz Golaszewski 2024-02-22 11:26 ` Dmitry Baryshkov 2024-02-22 11:26 ` Dmitry Baryshkov 2024-02-22 12:27 ` Bartosz Golaszewski 2024-02-22 12:27 ` Bartosz Golaszewski 2024-02-22 12:47 ` Dmitry Baryshkov 2024-02-22 12:47 ` Dmitry Baryshkov 2024-02-22 12:50 ` Bartosz Golaszewski 2024-02-22 12:50 ` Bartosz Golaszewski 2024-02-22 13:46 ` neil.armstrong 2024-02-22 13:46 ` neil.armstrong 2024-02-24 8:52 ` Krzysztof Kozlowski 2024-02-24 8:52 ` Krzysztof Kozlowski 2024-02-19 8:16 ` Neil Armstrong 2024-02-19 8:16 ` Neil Armstrong 2024-03-05 12:50 ` Amit Pundir 2024-03-05 12:50 ` Amit Pundir
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240216203215.40870-10-brgl@bgdev.pl \ --to=brgl@bgdev.pl \ --cc=abel.vesa@linaro.org \ --cc=andersson@kernel.org \ --cc=arnd@arndb.de \ --cc=bartosz.golaszewski@linaro.org \ --cc=bhelgaas@google.com \ --cc=broonie@kernel.org \ --cc=catalin.marinas@arm.com \ --cc=conor+dt@kernel.org \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=dmitry.baryshkov@linaro.org \ --cc=edumazet@google.com \ --cc=elder@linaro.org \ --cc=geert+renesas@glider.be \ --cc=gregkh@linuxfoundation.org \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=kuba@kernel.org \ --cc=kvalo@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-bluetooth@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-wireless@vger.kernel.org \ --cc=luiz.dentz@gmail.com \ --cc=lukas@wunner.de \ --cc=m.szyprowski@samsung.com \ --cc=mani@kernel.org \ --cc=marcel@holtmann.org \ --cc=neil.armstrong@linaro.org \ --cc=netdev@vger.kernel.org \ --cc=pabeni@redhat.com \ --cc=robh@kernel.org \ --cc=saravanak@google.com \ --cc=srinivas.kandagatla@linaro.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.