From: Michal Simek <michal.simek@xilinx.com> To: linux-arm-kernel@lists.infradead.org, git@xilinx.com Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>, Harini Katakam <harini.katakam@xilinx.com>, Mark Rutland <mark.rutland@arm.com>, Rajan Vaja <rajan.vaja@xilinx.com>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/8] arm64: zynqmp: Remove addition number in node name Date: Thu, 9 Jan 2020 14:52:16 +0100 [thread overview] Message-ID: <34e9e2001a874428b3e3fb3c73799589783a6278.1578577931.git.michal.simek@xilinx.com> (raw) In-Reply-To: <cover.1578577931.git.michal.simek@xilinx.com> This change is coming from mainline review that's why this patch is sync. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: - Add missing patch arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index b75235ae7d30..4a86efa32d68 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -123,7 +123,7 @@ &spi0 { status = "okay"; num-cs = <1>; - spi0_flash0: flash0@0 { + spi0_flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25wf080", "jedec,spi-nor"; @@ -141,7 +141,7 @@ &spi1 { status = "okay"; num-cs = <1>; - spi1_flash0: flash0@0 { + spi1_flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash"; -- 2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek@xilinx.com> To: linux-arm-kernel@lists.infradead.org, git@xilinx.com Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>, Rajan Vaja <rajan.vaja@xilinx.com>, linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Harini Katakam <harini.katakam@xilinx.com> Subject: [PATCH v2 2/8] arm64: zynqmp: Remove addition number in node name Date: Thu, 9 Jan 2020 14:52:16 +0100 [thread overview] Message-ID: <34e9e2001a874428b3e3fb3c73799589783a6278.1578577931.git.michal.simek@xilinx.com> (raw) In-Reply-To: <cover.1578577931.git.michal.simek@xilinx.com> This change is coming from mainline review that's why this patch is sync. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: - Add missing patch arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index b75235ae7d30..4a86efa32d68 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -123,7 +123,7 @@ &spi0 { status = "okay"; num-cs = <1>; - spi0_flash0: flash0@0 { + spi0_flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25wf080", "jedec,spi-nor"; @@ -141,7 +141,7 @@ &spi1 { status = "okay"; num-cs = <1>; - spi1_flash0: flash0@0 { + spi1_flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash"; -- 2.24.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-09 13:52 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-09 13:52 [PATCH v2 0/8] arm64: zynqmp: Various DT fixes Michal Simek 2020-01-09 13:52 ` Michal Simek 2020-01-09 13:52 ` [PATCH v2 1/8] arm64: zynqmp: Use ethernet-phy as node name for ethernet phys Michal Simek 2020-01-09 13:52 ` Michal Simek 2020-01-09 13:52 ` Michal Simek [this message] 2020-01-09 13:52 ` [PATCH v2 2/8] arm64: zynqmp: Remove addition number in node name Michal Simek 2020-01-09 13:52 ` [PATCH v2 3/8] arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104 Michal Simek 2020-01-09 13:52 ` Michal Simek 2020-01-09 13:52 ` [PATCH v2 4/8] arm64: zynqmp: Turn comment to gpio-line-names Michal Simek 2020-01-09 13:52 ` Michal Simek 2020-01-09 13:52 ` [PATCH v2 5/8] arm64: zynqmp: Setup clock-output-names for si570 chips Michal Simek 2020-01-09 13:52 ` Michal Simek 2020-01-09 13:52 ` [PATCH v2 6/8] arm64: zynqmp: Fix the si570 clock frequency on zcu111 Michal Simek 2020-01-09 13:52 ` Michal Simek 2020-01-09 13:52 ` [PATCH v2 7/8] arm64: zynqmp: Remove broken-cd from zcu100-revC Michal Simek 2020-01-09 13:52 ` Michal Simek 2020-01-09 13:52 ` [PATCH v2 8/8] arm64: zynqmp: Setup default number of chipselects for zcu100 Michal Simek 2020-01-09 13:52 ` Michal Simek 2020-01-21 9:51 ` [PATCH v2 0/8] arm64: zynqmp: Various DT fixes Michal Simek 2020-01-21 9:51 ` Michal Simek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=34e9e2001a874428b3e3fb3c73799589783a6278.1578577931.git.michal.simek@xilinx.com \ --to=michal.simek@xilinx.com \ --cc=anurag.kumar.vulisha@xilinx.com \ --cc=devicetree@vger.kernel.org \ --cc=git@xilinx.com \ --cc=harini.katakam@xilinx.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=rajan.vaja@xilinx.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.