From: Michal Simek <michal.simek@xilinx.com>
To: linux-arm-kernel@lists.infradead.org, git@xilinx.com
Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
Harini Katakam <harini.katakam@xilinx.com>,
Mark Rutland <mark.rutland@arm.com>,
Rajan Vaja <rajan.vaja@xilinx.com>,
Rob Herring <robh+dt@kernel.org>,
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/8] arm64: zynqmp: Setup clock-output-names for si570 chips
Date: Thu, 9 Jan 2020 14:52:19 +0100 [thread overview]
Message-ID: <b1939b85c07be210f09a4fe60e91e580320def82.1578577931.git.michal.simek@xilinx.com> (raw)
In-Reply-To: <cover.1578577931.git.michal.simek@xilinx.com>
If there are more instances of si570 clock-output-names property
should be used for differentiation of clock output.
The patch is adding this optional properties for all zynqmp boards with
si570 chip.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Changes in v2: None
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 2 ++
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 ++
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 ++
3 files changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index c96e8416fa7e..845671447f60 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -389,6 +389,7 @@ si570_1: clock-generator@5d { /* USER SI570 - u42 */
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
i2c@3 {
@@ -402,6 +403,7 @@ si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
temperature-stability = <50>; /* copy from zc702 */
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
i2c@4 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index ae62fe4287c2..822de6f04725 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -388,6 +388,7 @@ si570_1: clock-generator@5d { /* USER SI570 - u42 */
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
i2c@3 {
@@ -401,6 +402,7 @@ si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
temperature-stability = <50>; /* copy from zc702 */
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
i2c@4 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index b3c29947d6b3..022c732005ee 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -304,6 +304,7 @@ si570_1: clock-generator@5d { /* USER SI570 - u47 */
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
i2c@3 {
@@ -317,6 +318,7 @@ si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */
temperature-stability = <50>;
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
i2c@4 {
--
2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek@xilinx.com>
To: linux-arm-kernel@lists.infradead.org, git@xilinx.com
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
Rajan Vaja <rajan.vaja@xilinx.com>,
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Harini Katakam <harini.katakam@xilinx.com>
Subject: [PATCH v2 5/8] arm64: zynqmp: Setup clock-output-names for si570 chips
Date: Thu, 9 Jan 2020 14:52:19 +0100 [thread overview]
Message-ID: <b1939b85c07be210f09a4fe60e91e580320def82.1578577931.git.michal.simek@xilinx.com> (raw)
In-Reply-To: <cover.1578577931.git.michal.simek@xilinx.com>
If there are more instances of si570 clock-output-names property
should be used for differentiation of clock output.
The patch is adding this optional properties for all zynqmp boards with
si570 chip.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Changes in v2: None
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 2 ++
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 ++
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 ++
3 files changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index c96e8416fa7e..845671447f60 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -389,6 +389,7 @@ si570_1: clock-generator@5d { /* USER SI570 - u42 */
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
i2c@3 {
@@ -402,6 +403,7 @@ si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
temperature-stability = <50>; /* copy from zc702 */
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
i2c@4 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index ae62fe4287c2..822de6f04725 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -388,6 +388,7 @@ si570_1: clock-generator@5d { /* USER SI570 - u42 */
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
i2c@3 {
@@ -401,6 +402,7 @@ si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
temperature-stability = <50>; /* copy from zc702 */
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
i2c@4 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index b3c29947d6b3..022c732005ee 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -304,6 +304,7 @@ si570_1: clock-generator@5d { /* USER SI570 - u47 */
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
i2c@3 {
@@ -317,6 +318,7 @@ si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */
temperature-stability = <50>;
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
i2c@4 {
--
2.24.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-09 13:52 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-09 13:52 [PATCH v2 0/8] arm64: zynqmp: Various DT fixes Michal Simek
2020-01-09 13:52 ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 1/8] arm64: zynqmp: Use ethernet-phy as node name for ethernet phys Michal Simek
2020-01-09 13:52 ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 2/8] arm64: zynqmp: Remove addition number in node name Michal Simek
2020-01-09 13:52 ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 3/8] arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104 Michal Simek
2020-01-09 13:52 ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 4/8] arm64: zynqmp: Turn comment to gpio-line-names Michal Simek
2020-01-09 13:52 ` Michal Simek
2020-01-09 13:52 ` Michal Simek [this message]
2020-01-09 13:52 ` [PATCH v2 5/8] arm64: zynqmp: Setup clock-output-names for si570 chips Michal Simek
2020-01-09 13:52 ` [PATCH v2 6/8] arm64: zynqmp: Fix the si570 clock frequency on zcu111 Michal Simek
2020-01-09 13:52 ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 7/8] arm64: zynqmp: Remove broken-cd from zcu100-revC Michal Simek
2020-01-09 13:52 ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 8/8] arm64: zynqmp: Setup default number of chipselects for zcu100 Michal Simek
2020-01-09 13:52 ` Michal Simek
2020-01-21 9:51 ` [PATCH v2 0/8] arm64: zynqmp: Various DT fixes Michal Simek
2020-01-21 9:51 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b1939b85c07be210f09a4fe60e91e580320def82.1578577931.git.michal.simek@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=anurag.kumar.vulisha@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=harini.katakam@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=rajan.vaja@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=venkatesh.abbarapu@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.