From: Kishon Vijay Abraham I <kishon@ti.com>
To: Dave Gerlach <d-gerlach@ti.com>, Nishanth Menon <nm@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
Tony Lindgren <tony@atomide.com>,
Vignesh Raghavendra <vigneshr@ti.com>, Suman Anna <s-anna@ti.com>,
Sekhar Nori <nsekhar@ti.com>, Lokesh Vutla <lokeshvutla@ti.com>,
Aswath Govindraju <a-govindraju@ti.com>
Subject: Re: [PATCH v4 0/5] arm64: Initial support for Texas Instruments AM642 Platform
Date: Mon, 1 Mar 2021 20:26:01 +0530 [thread overview]
Message-ID: <3bc3cc02-fdbc-234e-f6dd-45a00b0cc566@ti.com> (raw)
In-Reply-To: <20210226144257.5470-1-d-gerlach@ti.com>
On 26/02/21 8:12 pm, Dave Gerlach wrote:
> Hi,
> This is v4 of the series to add initial support for the latest new SoC,
> AM642, from Texas Instruments. Additional detail can be found in the
> patch descriptions, also see AM64X Technical Reference Manual (SPRUIM2,
> Nov 2020) for further details: https://www.ti.com/lit/pdf/spruim2
>
> This version contains a few minor fixes from v3:
>
> * Add Rob's Ack to patch 2
> * Drop address-cells from interrupt controller node in patch 4 as [1] was dropped
> * Add Suman's Signed-off-by to patch 3
> * Fix date range in Makefile for TI dtbs in patch 5
> * Include Reviewed-by from several people from v3 for multiple patches
>
> v3: https://lore.kernel.org/linux-arm-kernel/20210120202532.9011-1-d-gerlach@ti.com/
> v2: https://lore.kernel.org/linux-arm-kernel/20210119163927.774-1-d-gerlach@ti.com/
> v1: https://lore.kernel.org/linux-arm-kernel/20201125052004.17823-1-d-gerlach@ti.com/
Kernel Boot logs: https://pastebin.ubuntu.com/p/hFV56bM6Jx/
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
>
> Regards,
> Dave
>
> [1] https://lore.kernel.org/linux-arm-kernel/161131973654.21299.8023411678794984222.b4-ty@ti.com/
>
> Dave Gerlach (4):
> dt-bindings: arm: ti: Add bindings for AM642 SoC
> dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
> arm64: dts: ti: Add support for AM642 SoC
> arm64: dts: ti: Add support for AM642 EVM
>
> Peter Ujfalusi (1):
> arm64: dts: ti: k3-am64-main: Enable DMA support
>
> .../devicetree/bindings/arm/ti/k3.yaml | 6 +
> arch/arm64/boot/dts/ti/Makefile | 4 +-
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 405 ++++++++++++++++++
> arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 76 ++++
> arch/arm64/boot/dts/ti/k3-am64.dtsi | 103 +++++
> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 246 +++++++++++
> arch/arm64/boot/dts/ti/k3-am642.dtsi | 65 +++
> include/dt-bindings/pinctrl/k3.h | 5 +-
> 8 files changed, 908 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
> create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
> create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts
> create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi
>
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Dave Gerlach <d-gerlach@ti.com>, Nishanth Menon <nm@ti.com>
Cc: devicetree@vger.kernel.org, Vignesh Raghavendra <vigneshr@ti.com>,
Tony Lindgren <tony@atomide.com>, Sekhar Nori <nsekhar@ti.com>,
Lokesh Vutla <lokeshvutla@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Aswath Govindraju <a-govindraju@ti.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 0/5] arm64: Initial support for Texas Instruments AM642 Platform
Date: Mon, 1 Mar 2021 20:26:01 +0530 [thread overview]
Message-ID: <3bc3cc02-fdbc-234e-f6dd-45a00b0cc566@ti.com> (raw)
In-Reply-To: <20210226144257.5470-1-d-gerlach@ti.com>
On 26/02/21 8:12 pm, Dave Gerlach wrote:
> Hi,
> This is v4 of the series to add initial support for the latest new SoC,
> AM642, from Texas Instruments. Additional detail can be found in the
> patch descriptions, also see AM64X Technical Reference Manual (SPRUIM2,
> Nov 2020) for further details: https://www.ti.com/lit/pdf/spruim2
>
> This version contains a few minor fixes from v3:
>
> * Add Rob's Ack to patch 2
> * Drop address-cells from interrupt controller node in patch 4 as [1] was dropped
> * Add Suman's Signed-off-by to patch 3
> * Fix date range in Makefile for TI dtbs in patch 5
> * Include Reviewed-by from several people from v3 for multiple patches
>
> v3: https://lore.kernel.org/linux-arm-kernel/20210120202532.9011-1-d-gerlach@ti.com/
> v2: https://lore.kernel.org/linux-arm-kernel/20210119163927.774-1-d-gerlach@ti.com/
> v1: https://lore.kernel.org/linux-arm-kernel/20201125052004.17823-1-d-gerlach@ti.com/
Kernel Boot logs: https://pastebin.ubuntu.com/p/hFV56bM6Jx/
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
>
> Regards,
> Dave
>
> [1] https://lore.kernel.org/linux-arm-kernel/161131973654.21299.8023411678794984222.b4-ty@ti.com/
>
> Dave Gerlach (4):
> dt-bindings: arm: ti: Add bindings for AM642 SoC
> dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
> arm64: dts: ti: Add support for AM642 SoC
> arm64: dts: ti: Add support for AM642 EVM
>
> Peter Ujfalusi (1):
> arm64: dts: ti: k3-am64-main: Enable DMA support
>
> .../devicetree/bindings/arm/ti/k3.yaml | 6 +
> arch/arm64/boot/dts/ti/Makefile | 4 +-
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 405 ++++++++++++++++++
> arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 76 ++++
> arch/arm64/boot/dts/ti/k3-am64.dtsi | 103 +++++
> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 246 +++++++++++
> arch/arm64/boot/dts/ti/k3-am642.dtsi | 65 +++
> include/dt-bindings/pinctrl/k3.h | 5 +-
> 8 files changed, 908 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
> create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
> create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts
> create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-01 14:57 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-26 14:42 [PATCH v4 0/5] arm64: Initial support for Texas Instruments AM642 Platform Dave Gerlach
2021-02-26 14:42 ` Dave Gerlach
2021-02-26 14:42 ` [PATCH v4 1/5] dt-bindings: arm: ti: Add bindings for AM642 SoC Dave Gerlach
2021-02-26 14:42 ` Dave Gerlach
2021-02-27 13:19 ` Nishanth Menon
2021-02-27 13:19 ` Nishanth Menon
2021-02-26 14:42 ` [PATCH v4 2/5] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 Dave Gerlach
2021-02-26 14:42 ` Dave Gerlach
2021-02-27 13:20 ` Nishanth Menon
2021-02-27 13:20 ` Nishanth Menon
2021-02-26 14:42 ` [PATCH v4 3/5] arm64: dts: ti: Add support for AM642 SoC Dave Gerlach
2021-02-26 14:42 ` Dave Gerlach
2021-02-26 14:42 ` [PATCH v4 4/5] arm64: dts: ti: k3-am64-main: Enable DMA support Dave Gerlach
2021-02-26 14:42 ` Dave Gerlach
2021-02-26 14:42 ` [PATCH v4 5/5] arm64: dts: ti: Add support for AM642 EVM Dave Gerlach
2021-02-26 14:42 ` Dave Gerlach
2021-02-27 14:55 ` [PATCH v4 0/5] arm64: Initial support for Texas Instruments AM642 Platform Nishanth Menon
2021-02-27 14:55 ` Nishanth Menon
2021-03-01 14:56 ` Kishon Vijay Abraham I [this message]
2021-03-01 14:56 ` Kishon Vijay Abraham I
2021-03-01 15:12 ` Nishanth Menon
2021-03-01 15:12 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3bc3cc02-fdbc-234e-f6dd-45a00b0cc566@ti.com \
--to=kishon@ti.com \
--cc=a-govindraju@ti.com \
--cc=d-gerlach@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=s-anna@ti.com \
--cc=tony@atomide.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.