[PATCH v7 4/7] thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse

From: Amit Kucheria <amit.kucheria@linaro.org>
To: linux-kernel@vger.kernel.org
Cc: rnayak@codeaurora.org, linux-arm-msm@vger.kernel.org,
	bjorn.andersson@linaro.org, edubezval@gmail.com,
	smohanad@codeaurora.org, vivek.gautam@codeaurora.org,
	andy.gross@linaro.org, dianders@chromium.org, mka@chromium.org,
	Zhang Rui <rui.zhang@intel.com>,
	linux-pm@vger.kernel.org
Subject: [PATCH v7 4/7] thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse
Date: Thu, 12 Jul 2018 14:09:05 +0530	[thread overview]
Message-ID: <3bd2c05db1bfe6fd3891abd87b0c767152346a1d.1531384019.git.amit.kucheria@linaro.org> (raw)
In-Reply-To: <cover.1531384019.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1531384019.git.amit.kucheria@linaro.org>

The TSENS block inside the 8996 is internally classified as version 2 of
the IP. Several other SoC families use this block and can share this code.

We rename get_temp() to reflect that it can be used across the v2 family.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
 drivers/thermal/qcom/Makefile                     |  2 +-
 drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} | 25 ++++++++---------------
 2 files changed, 9 insertions(+), 18 deletions(-)
 rename drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} (66%)

diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index 2cc2193..a821929 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -1,2 +1,2 @@
 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
-qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
+qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o
diff --git a/drivers/thermal/qcom/tsens-8996.c b/drivers/thermal/qcom/tsens-v2.c
similarity index 66%
rename from drivers/thermal/qcom/tsens-8996.c
rename to drivers/thermal/qcom/tsens-v2.c
index 3e60cec..44d3736 100644
--- a/drivers/thermal/qcom/tsens-8996.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -1,27 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
+ * Copyright (c) 2018, Linaro Limited
  */
 
-#include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include "tsens.h"
 
-#define STATUS_OFFSET	0xa0
-#define LAST_TEMP_MASK	0xfff
+#define STATUS_OFFSET		0xa0
+#define LAST_TEMP_MASK		0xfff
 #define STATUS_VALID_BIT	BIT(21)
 #define CODE_SIGN_BIT		BIT(11)
 
-static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
+static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
 {
 	struct tsens_sensor *s = &tmdev->sensor[id];
 	u32 code;
@@ -73,12 +64,12 @@ static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
 	return 0;
 }
 
-static const struct tsens_ops ops_8996 = {
+static const struct tsens_ops ops_generic_v2 = {
 	.init		= init_common,
-	.get_temp	= get_temp_8996,
+	.get_temp	= get_temp_tsens_v2,
 };
 
 const struct tsens_data data_8996 = {
 	.num_sensors	= 13,
-	.ops		= &ops_8996,
+	.ops		= &ops_generic_v2,
 };
-- 
2.7.4
