From: Roland Stigge <stigge@antcom.de>
To: "arm@kernel.org" <arm@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, bigeasy@linutronix.de,
arnd@arndb.de, aletes.xgr@gmail.com, kevin.wells@nxp.com,
srinivas.bakki@nxp.com
Subject: [GIT PULL] ARM: mach-pnx4008: Remove architecture
Date: Fri, 24 Aug 2012 15:24:20 +0200 [thread overview]
Message-ID: <50378084.3080102@antcom.de> (raw)
In-Reply-To: <1345724548-18130-1-git-send-email-stigge@antcom.de>
Hi,
On 23/08/12 14:22, Roland Stigge wrote:
> This patch removes the ARM architecture mach-pnx4008. No direct support or user
> feedback since 2006. Acknowledgements from NXP/Philips and Linux arm-soc
> maintainers.
>
> Signed-off-by: Roland Stigge <stigge@antcom.de>
The patch was a bit too big for the mailing list - sorry.
Now re-proposing via pull request, below.
Thanks in advance,
Roland
The following changes since commit fea7a08acb13524b47711625eebea40a0ede69a0:
Linux 3.6-rc3 (2012-08-22 13:29:06 -0700)
are available in the git repository at:
git://git.antcom.de/linux-2.6.git pnx4008-removal
for you to fetch changes up to 5b54d019ca93850099299527753d23a5ff57c2e6:
ARM: mach-pnx4008: Remove architecture (2012-08-24 15:12:21 +0200)
----------------------------------------------------------------
Roland Stigge (1):
ARM: mach-pnx4008: Remove architecture
arch/arm/Kconfig | 8 -
arch/arm/Makefile | 1 -
arch/arm/configs/pnx4008_defconfig | 472 ---------
arch/arm/mach-pnx4008/Makefile | 12 -
arch/arm/mach-pnx4008/Makefile.boot | 4 -
arch/arm/mach-pnx4008/clock.c | 1001 -------------------
arch/arm/mach-pnx4008/clock.h | 43 -
arch/arm/mach-pnx4008/core.c | 290 ------
arch/arm/mach-pnx4008/dma.c | 1105 ---------------------
arch/arm/mach-pnx4008/gpio.c | 328 ------
arch/arm/mach-pnx4008/i2c.c | 86 --
arch/arm/mach-pnx4008/include/mach/clock.h | 62 --
arch/arm/mach-pnx4008/include/mach/debug-macro.S | 21 -
arch/arm/mach-pnx4008/include/mach/dma.h | 160 ---
arch/arm/mach-pnx4008/include/mach/entry-macro.S | 116 ---
arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h | 241 -----
arch/arm/mach-pnx4008/include/mach/hardware.h | 32 -
arch/arm/mach-pnx4008/include/mach/irq.h | 42 -
arch/arm/mach-pnx4008/include/mach/irqs.h | 215 ----
arch/arm/mach-pnx4008/include/mach/param.h | 21 -
arch/arm/mach-pnx4008/include/mach/platform.h | 69 --
arch/arm/mach-pnx4008/include/mach/pm.h | 33 -
arch/arm/mach-pnx4008/include/mach/timex.h | 19 -
arch/arm/mach-pnx4008/include/mach/uncompress.h | 46 -
arch/arm/mach-pnx4008/irq.c | 121 ---
arch/arm/mach-pnx4008/pm.c | 153 ---
arch/arm/mach-pnx4008/serial.c | 67 --
arch/arm/mach-pnx4008/sleep.S | 195 ----
arch/arm/mach-pnx4008/time.c | 134 ---
arch/arm/mach-pnx4008/time.h | 70 --
arch/arm/tools/mach-types | 1 -
drivers/i2c/busses/Kconfig | 2 +-
drivers/usb/Kconfig | 1 -
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/ohci-hcd.c | 2 +-
drivers/usb/host/ohci-nxp.c | 84 +-
drivers/video/Kconfig | 15 -
drivers/video/Makefile | 2 -
drivers/video/pnx4008/Makefile | 7 -
drivers/video/pnx4008/dum.h | 211 ----
drivers/video/pnx4008/fbcommon.h | 43 -
drivers/video/pnx4008/pnxrgbfb.c | 198 ----
drivers/video/pnx4008/sdum.c | 861 ----------------
drivers/video/pnx4008/sdum.h | 136 ---
drivers/watchdog/Kconfig | 6 +-
45 files changed, 7 insertions(+), 6731 deletions(-)
delete mode 100644 arch/arm/configs/pnx4008_defconfig
delete mode 100644 arch/arm/mach-pnx4008/Makefile
delete mode 100644 arch/arm/mach-pnx4008/Makefile.boot
delete mode 100644 arch/arm/mach-pnx4008/clock.c
delete mode 100644 arch/arm/mach-pnx4008/clock.h
delete mode 100644 arch/arm/mach-pnx4008/core.c
delete mode 100644 arch/arm/mach-pnx4008/dma.c
delete mode 100644 arch/arm/mach-pnx4008/gpio.c
delete mode 100644 arch/arm/mach-pnx4008/i2c.c
delete mode 100644 arch/arm/mach-pnx4008/include/mach/clock.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/debug-macro.S
delete mode 100644 arch/arm/mach-pnx4008/include/mach/dma.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/hardware.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/irq.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/irqs.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/param.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/platform.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/pm.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/timex.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-pnx4008/irq.c
delete mode 100644 arch/arm/mach-pnx4008/pm.c
delete mode 100644 arch/arm/mach-pnx4008/serial.c
delete mode 100644 arch/arm/mach-pnx4008/sleep.S
delete mode 100644 arch/arm/mach-pnx4008/time.c
delete mode 100644 arch/arm/mach-pnx4008/time.h
delete mode 100644 drivers/video/pnx4008/Makefile
delete mode 100644 drivers/video/pnx4008/dum.h
delete mode 100644 drivers/video/pnx4008/fbcommon.h
delete mode 100644 drivers/video/pnx4008/pnxrgbfb.c
delete mode 100644 drivers/video/pnx4008/sdum.c
delete mode 100644 drivers/video/pnx4008/sdum.h
WARNING: multiple messages have this Message-ID (diff)
From: stigge@antcom.de (Roland Stigge)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] ARM: mach-pnx4008: Remove architecture
Date: Fri, 24 Aug 2012 15:24:20 +0200 [thread overview]
Message-ID: <50378084.3080102@antcom.de> (raw)
In-Reply-To: <1345724548-18130-1-git-send-email-stigge@antcom.de>
Hi,
On 23/08/12 14:22, Roland Stigge wrote:
> This patch removes the ARM architecture mach-pnx4008. No direct support or user
> feedback since 2006. Acknowledgements from NXP/Philips and Linux arm-soc
> maintainers.
>
> Signed-off-by: Roland Stigge <stigge@antcom.de>
The patch was a bit too big for the mailing list - sorry.
Now re-proposing via pull request, below.
Thanks in advance,
Roland
The following changes since commit fea7a08acb13524b47711625eebea40a0ede69a0:
Linux 3.6-rc3 (2012-08-22 13:29:06 -0700)
are available in the git repository at:
git://git.antcom.de/linux-2.6.git pnx4008-removal
for you to fetch changes up to 5b54d019ca93850099299527753d23a5ff57c2e6:
ARM: mach-pnx4008: Remove architecture (2012-08-24 15:12:21 +0200)
----------------------------------------------------------------
Roland Stigge (1):
ARM: mach-pnx4008: Remove architecture
arch/arm/Kconfig | 8 -
arch/arm/Makefile | 1 -
arch/arm/configs/pnx4008_defconfig | 472 ---------
arch/arm/mach-pnx4008/Makefile | 12 -
arch/arm/mach-pnx4008/Makefile.boot | 4 -
arch/arm/mach-pnx4008/clock.c | 1001 -------------------
arch/arm/mach-pnx4008/clock.h | 43 -
arch/arm/mach-pnx4008/core.c | 290 ------
arch/arm/mach-pnx4008/dma.c | 1105 ---------------------
arch/arm/mach-pnx4008/gpio.c | 328 ------
arch/arm/mach-pnx4008/i2c.c | 86 --
arch/arm/mach-pnx4008/include/mach/clock.h | 62 --
arch/arm/mach-pnx4008/include/mach/debug-macro.S | 21 -
arch/arm/mach-pnx4008/include/mach/dma.h | 160 ---
arch/arm/mach-pnx4008/include/mach/entry-macro.S | 116 ---
arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h | 241 -----
arch/arm/mach-pnx4008/include/mach/hardware.h | 32 -
arch/arm/mach-pnx4008/include/mach/irq.h | 42 -
arch/arm/mach-pnx4008/include/mach/irqs.h | 215 ----
arch/arm/mach-pnx4008/include/mach/param.h | 21 -
arch/arm/mach-pnx4008/include/mach/platform.h | 69 --
arch/arm/mach-pnx4008/include/mach/pm.h | 33 -
arch/arm/mach-pnx4008/include/mach/timex.h | 19 -
arch/arm/mach-pnx4008/include/mach/uncompress.h | 46 -
arch/arm/mach-pnx4008/irq.c | 121 ---
arch/arm/mach-pnx4008/pm.c | 153 ---
arch/arm/mach-pnx4008/serial.c | 67 --
arch/arm/mach-pnx4008/sleep.S | 195 ----
arch/arm/mach-pnx4008/time.c | 134 ---
arch/arm/mach-pnx4008/time.h | 70 --
arch/arm/tools/mach-types | 1 -
drivers/i2c/busses/Kconfig | 2 +-
drivers/usb/Kconfig | 1 -
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/ohci-hcd.c | 2 +-
drivers/usb/host/ohci-nxp.c | 84 +-
drivers/video/Kconfig | 15 -
drivers/video/Makefile | 2 -
drivers/video/pnx4008/Makefile | 7 -
drivers/video/pnx4008/dum.h | 211 ----
drivers/video/pnx4008/fbcommon.h | 43 -
drivers/video/pnx4008/pnxrgbfb.c | 198 ----
drivers/video/pnx4008/sdum.c | 861 ----------------
drivers/video/pnx4008/sdum.h | 136 ---
drivers/watchdog/Kconfig | 6 +-
45 files changed, 7 insertions(+), 6731 deletions(-)
delete mode 100644 arch/arm/configs/pnx4008_defconfig
delete mode 100644 arch/arm/mach-pnx4008/Makefile
delete mode 100644 arch/arm/mach-pnx4008/Makefile.boot
delete mode 100644 arch/arm/mach-pnx4008/clock.c
delete mode 100644 arch/arm/mach-pnx4008/clock.h
delete mode 100644 arch/arm/mach-pnx4008/core.c
delete mode 100644 arch/arm/mach-pnx4008/dma.c
delete mode 100644 arch/arm/mach-pnx4008/gpio.c
delete mode 100644 arch/arm/mach-pnx4008/i2c.c
delete mode 100644 arch/arm/mach-pnx4008/include/mach/clock.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/debug-macro.S
delete mode 100644 arch/arm/mach-pnx4008/include/mach/dma.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/hardware.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/irq.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/irqs.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/param.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/platform.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/pm.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/timex.h
delete mode 100644 arch/arm/mach-pnx4008/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-pnx4008/irq.c
delete mode 100644 arch/arm/mach-pnx4008/pm.c
delete mode 100644 arch/arm/mach-pnx4008/serial.c
delete mode 100644 arch/arm/mach-pnx4008/sleep.S
delete mode 100644 arch/arm/mach-pnx4008/time.c
delete mode 100644 arch/arm/mach-pnx4008/time.h
delete mode 100644 drivers/video/pnx4008/Makefile
delete mode 100644 drivers/video/pnx4008/dum.h
delete mode 100644 drivers/video/pnx4008/fbcommon.h
delete mode 100644 drivers/video/pnx4008/pnxrgbfb.c
delete mode 100644 drivers/video/pnx4008/sdum.c
delete mode 100644 drivers/video/pnx4008/sdum.h
next prev parent reply other threads:[~2012-08-24 13:24 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-23 12:22 [PATCH] ARM: mach-pnx4008: Remove architecture Roland Stigge
2012-08-23 12:22 ` Roland Stigge
2012-08-24 13:24 ` Roland Stigge [this message]
2012-08-24 13:24 ` [GIT PULL] " Roland Stigge
2012-08-26 4:41 ` Arnd Bergmann
2012-08-26 4:41 ` Arnd Bergmann
2012-08-26 14:34 ` Roland Stigge
2012-08-26 14:34 ` Roland Stigge
2012-09-05 23:18 ` Olof Johansson
2012-09-05 23:18 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50378084.3080102@antcom.de \
--to=stigge@antcom.de \
--cc=aletes.xgr@gmail.com \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=bigeasy@linutronix.de \
--cc=kevin.wells@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=srinivas.bakki@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.