All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: Marc Zyngier <marc.zyngier@arm.com>
Cc: Benoit Cousson <bcousson@baylibre.com>,
	Tony Lindgren <tony@atomide.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	Stefan Agner <stefan@agner.ch>,
	Jason Cooper <jason@lakedaemon.net>,
	Thomas Gleixner <tglx@linutronix.de>,
	"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>
Subject: Re: [PATCH 0/5] irqchip: kill the GIC routable domain
Date: Wed, 10 Dec 2014 12:21:46 -0600	[thread overview]
Message-ID: <54888F3A.5010800@ti.com> (raw)
In-Reply-To: <54874223.2000805@arm.com>

On 12/09/2014 12:40 PM, Marc Zyngier wrote:
> On 09/12/14 18:17, Nishanth Menon wrote:
>> On 09:53-20141209, Marc Zyngier wrote:
>>> On 08/12/14 22:41, Nishanth Menon wrote:
>>>
>>>> Anyways.. The following diff[1] on top of your branch makes DRA7 work - I
>>>> assume you will squash as needed and repost with linux-omap mailing list
>>>> in CC.
>>>
>>> Brilliant. I'll squash that into my tree and repost at some point.
>>
>> K, it will be nice to have a reflow of the series based on v3.19-rc1
>> since there are dts dependencies and we dont want folks to have
>> regressions on their platforms of choice..
>>
>> Obviously, my tests are basic boot tests and should get a few weeks(as
>> you already mentioned) on linux-next to get properly soaked
>>
>>>
>>>> I increased the scope of testing knowing that WUGEN is present in many
>>>> A9 based TI platforms as well.. and at least OMAP4 showed flakiness in
>>>> my testing.. Also a few notes:
>>>>
>>>> Stuff like: am437x is a bit questionable (interrupt-parent probably should be wugen?)
>>>> 175:          0       GIC  39  tps65218 
>>>>
>>>> OMAP5: (should be wugen?)
>>>> 308:       4323          0       GIC 106  OMAP UART2
>>>> 411:          0          0       GIC 151  twl6040
>>>> 405:          1          0       GIC  39  palmas
>>>
>>> Well, I can't really tell. Someone with access to the documentation
>>> should be able to find out.
>>
>> AM437x: http://www.ti.com/lit/pdf/spruhl7
>> OMAP5: http://www.ti.com/lit/pdf/swpu249
>>
>> yeah, we should be able to do them as well - trivially since they follow
>> the same structure as other SoCs without crossbar.
> 
> Done some stuff in that department.
> 
>>>
>>>> OMAP4 serial port is flaky -> not sure if it is due to routing of GIC to UART2 and not via WUGEN
>>>> IRQ branch: with my fix applied:
>>>> ---------------------------------
>>>
>>> [...]
>>>
>>>> 18: pandaboard-es:  Boot FAIL: http://slexy.org/raw/s20ty0Z6i5 (not expected)
>>>> 19: pandaboard-vanilla:  Boot FAIL: http://slexy.org/raw/s20BYfaMd2 (not expected)
>>>
>>> If I read the log correctly, the serial port stops responding after a while?
>>
>> yeah - dug at the omap4 ones a bit, obviously once the deeper c states
>> are hit, we'd like wakeupgen to wakeup CPU else we will be "sluggish" in
>> the sense that the event is detected when some other wakeupgen enabled
>> interrupt takes place.
> 
> I realised that as well once I got a panda up and running.
> 
>> Adding the following makes my panda work fine.
>> 1: pandaboard-es:  Boot PASS: http://slexy.org/raw/s20o8DaBvh
>> 2: pandaboard-vanilla:  Boot PASS: http://slexy.org/raw/s222JndDdh
>>
>>
>> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
>> index 1505135..8b6d50e 100644
>> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
>> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
>> @@ -371,8 +371,8 @@
>>  	twl: twl@48 {
>>  		reg = <0x48>;
>>  		/* IRQ# = 7 */
>> -		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
>> -		interrupt-parent = <&gic>;
>> +		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to wakeupgen to gic */
>> +		interrupt-parent = <&wakeupgen>;
>>  	};
> 
> [...]
> 
> I already fixed those in my tree, in a slightly different way: no need
> to have an interrupt parent at all, as we're going to inherit the
> default anyway.
> 
> I've pushed another version of the branch, with the crossbar rework
> sitting *before* the WUGEN hacks. That should hopefully make bisection work.
> 
> If you can give it a shake, that'd be most appreciated. I'll repost the
> branch in a couple of days.
> 

Did a quick run.. and thought of testing power management and found
that CPUFreq for my platforms are broken in v3.18-rc7 and my scripts
broke (so much for my cronjob testing daily boot... now I gotta add
some PM test as well.. Sigh..) anyways.. just boot log..

based on
irq/die-gic-arch-extn-die-die-die c0024cb irqchip: gic: Drop support
for gic_arch_extn


 1: am335x-evm:  Boot PASS: http://slexy.org/raw/s201YeK4dW
 2:  am335x-sk:  Boot PASS: http://slexy.org/raw/s20nydiyVx
 3: am3517-evm:  Boot PASS: http://slexy.org/raw/s2aTrenePo
 4:  am437x-sk:  Boot FAIL: http://slexy.org/raw/s20NNiEa4W
 5: am43xx-epos:  Boot PASS: http://slexy.org/raw/s2gghhhyOy
 6: am43xx-gpevm:  Boot PASS: http://slexy.org/raw/s2LY4Cb75N
 7: BeagleBoard-XM:  Boot PASS: http://slexy.org/raw/s2e8iJMUXu
 8: beagleboard-vanilla:  Boot PASS: http://slexy.org/raw/s20wqxUmvr
 9: beaglebone-black:  Boot PASS: http://slexy.org/raw/s21I0g2Ba3
10: beaglebone:  Boot PASS: http://slexy.org/raw/s2lpED0qW4
11: craneboard:  Boot PASS: http://slexy.org/raw/s230RKflY3
12: dra72x-evm:  Boot FAIL: http://slexy.org/raw/s21fWVnjaB
13: dra7xx-evm:  Boot PASS: http://slexy.org/raw/s20yEhfruO
14: OMAP3430-Labrador(LDP):  Boot PASS: http://slexy.org/raw/s20qZaXwz0
15:       n900:  Boot PASS: http://slexy.org/raw/s21LNTXZP7
16:  omap5-evm:  Boot PASS: http://slexy.org/raw/s2WF8eAcK2
17: pandaboard-es:  Boot PASS: http://slexy.org/raw/s21PVo7ENF
18: pandaboard-vanilla:  Boot PASS: http://slexy.org/raw/s2BcMbSrVF
19:    sdp2430:  Boot PASS: http://slexy.org/raw/s24LgXbav1
20:    sdp3430:  Boot PASS: http://slexy.org/raw/s21IaKdkUs
TOTAL = 20 boards, Booted Boards = 18, No Boot boards = 2


will try to first try and save a bit of cpufreq and reinstate my
scripts and once you post based on 3.19-rc1, will do a retest..

-- 
Regards,
Nishanth Menon

WARNING: multiple messages have this Message-ID (diff)
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/5] irqchip: kill the GIC routable domain
Date: Wed, 10 Dec 2014 12:21:46 -0600	[thread overview]
Message-ID: <54888F3A.5010800@ti.com> (raw)
In-Reply-To: <54874223.2000805@arm.com>

On 12/09/2014 12:40 PM, Marc Zyngier wrote:
> On 09/12/14 18:17, Nishanth Menon wrote:
>> On 09:53-20141209, Marc Zyngier wrote:
>>> On 08/12/14 22:41, Nishanth Menon wrote:
>>>
>>>> Anyways.. The following diff[1] on top of your branch makes DRA7 work - I
>>>> assume you will squash as needed and repost with linux-omap mailing list
>>>> in CC.
>>>
>>> Brilliant. I'll squash that into my tree and repost at some point.
>>
>> K, it will be nice to have a reflow of the series based on v3.19-rc1
>> since there are dts dependencies and we dont want folks to have
>> regressions on their platforms of choice..
>>
>> Obviously, my tests are basic boot tests and should get a few weeks(as
>> you already mentioned) on linux-next to get properly soaked
>>
>>>
>>>> I increased the scope of testing knowing that WUGEN is present in many
>>>> A9 based TI platforms as well.. and at least OMAP4 showed flakiness in
>>>> my testing.. Also a few notes:
>>>>
>>>> Stuff like: am437x is a bit questionable (interrupt-parent probably should be wugen?)
>>>> 175:          0       GIC  39  tps65218 
>>>>
>>>> OMAP5: (should be wugen?)
>>>> 308:       4323          0       GIC 106  OMAP UART2
>>>> 411:          0          0       GIC 151  twl6040
>>>> 405:          1          0       GIC  39  palmas
>>>
>>> Well, I can't really tell. Someone with access to the documentation
>>> should be able to find out.
>>
>> AM437x: http://www.ti.com/lit/pdf/spruhl7
>> OMAP5: http://www.ti.com/lit/pdf/swpu249
>>
>> yeah, we should be able to do them as well - trivially since they follow
>> the same structure as other SoCs without crossbar.
> 
> Done some stuff in that department.
> 
>>>
>>>> OMAP4 serial port is flaky -> not sure if it is due to routing of GIC to UART2 and not via WUGEN
>>>> IRQ branch: with my fix applied:
>>>> ---------------------------------
>>>
>>> [...]
>>>
>>>> 18: pandaboard-es:  Boot FAIL: http://slexy.org/raw/s20ty0Z6i5 (not expected)
>>>> 19: pandaboard-vanilla:  Boot FAIL: http://slexy.org/raw/s20BYfaMd2 (not expected)
>>>
>>> If I read the log correctly, the serial port stops responding after a while?
>>
>> yeah - dug at the omap4 ones a bit, obviously once the deeper c states
>> are hit, we'd like wakeupgen to wakeup CPU else we will be "sluggish" in
>> the sense that the event is detected when some other wakeupgen enabled
>> interrupt takes place.
> 
> I realised that as well once I got a panda up and running.
> 
>> Adding the following makes my panda work fine.
>> 1: pandaboard-es:  Boot PASS: http://slexy.org/raw/s20o8DaBvh
>> 2: pandaboard-vanilla:  Boot PASS: http://slexy.org/raw/s222JndDdh
>>
>>
>> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
>> index 1505135..8b6d50e 100644
>> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
>> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
>> @@ -371,8 +371,8 @@
>>  	twl: twl at 48 {
>>  		reg = <0x48>;
>>  		/* IRQ# = 7 */
>> -		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
>> -		interrupt-parent = <&gic>;
>> +		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to wakeupgen to gic */
>> +		interrupt-parent = <&wakeupgen>;
>>  	};
> 
> [...]
> 
> I already fixed those in my tree, in a slightly different way: no need
> to have an interrupt parent at all, as we're going to inherit the
> default anyway.
> 
> I've pushed another version of the branch, with the crossbar rework
> sitting *before* the WUGEN hacks. That should hopefully make bisection work.
> 
> If you can give it a shake, that'd be most appreciated. I'll repost the
> branch in a couple of days.
> 

Did a quick run.. and thought of testing power management and found
that CPUFreq for my platforms are broken in v3.18-rc7 and my scripts
broke (so much for my cronjob testing daily boot... now I gotta add
some PM test as well.. Sigh..) anyways.. just boot log..

based on
irq/die-gic-arch-extn-die-die-die c0024cb irqchip: gic: Drop support
for gic_arch_extn


 1: am335x-evm:  Boot PASS: http://slexy.org/raw/s201YeK4dW
 2:  am335x-sk:  Boot PASS: http://slexy.org/raw/s20nydiyVx
 3: am3517-evm:  Boot PASS: http://slexy.org/raw/s2aTrenePo
 4:  am437x-sk:  Boot FAIL: http://slexy.org/raw/s20NNiEa4W
 5: am43xx-epos:  Boot PASS: http://slexy.org/raw/s2gghhhyOy
 6: am43xx-gpevm:  Boot PASS: http://slexy.org/raw/s2LY4Cb75N
 7: BeagleBoard-XM:  Boot PASS: http://slexy.org/raw/s2e8iJMUXu
 8: beagleboard-vanilla:  Boot PASS: http://slexy.org/raw/s20wqxUmvr
 9: beaglebone-black:  Boot PASS: http://slexy.org/raw/s21I0g2Ba3
10: beaglebone:  Boot PASS: http://slexy.org/raw/s2lpED0qW4
11: craneboard:  Boot PASS: http://slexy.org/raw/s230RKflY3
12: dra72x-evm:  Boot FAIL: http://slexy.org/raw/s21fWVnjaB
13: dra7xx-evm:  Boot PASS: http://slexy.org/raw/s20yEhfruO
14: OMAP3430-Labrador(LDP):  Boot PASS: http://slexy.org/raw/s20qZaXwz0
15:       n900:  Boot PASS: http://slexy.org/raw/s21LNTXZP7
16:  omap5-evm:  Boot PASS: http://slexy.org/raw/s2WF8eAcK2
17: pandaboard-es:  Boot PASS: http://slexy.org/raw/s21PVo7ENF
18: pandaboard-vanilla:  Boot PASS: http://slexy.org/raw/s2BcMbSrVF
19:    sdp2430:  Boot PASS: http://slexy.org/raw/s24LgXbav1
20:    sdp3430:  Boot PASS: http://slexy.org/raw/s21IaKdkUs
TOTAL = 20 boards, Booted Boards = 18, No Boot boards = 2


will try to first try and save a bit of cpufreq and reinstate my
scripts and once you post based on 3.19-rc1, will do a retest..

-- 
Regards,
Nishanth Menon

  reply	other threads:[~2014-12-10 18:22 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-06 13:46 [PATCH 0/5] irqchip: kill the GIC routable domain Marc Zyngier
2014-12-06 13:46 ` [PATCH 1/5] genirq: Add irqchip_set_wake_parent Marc Zyngier
2014-12-06 15:34   ` Stefan Agner
2014-12-08 11:18     ` Marc Zyngier
2014-12-06 13:46 ` [PATCH 2/5] irqchip: crossbar: convert dra7 crossbar to stacked domains Marc Zyngier
2014-12-06 13:46 ` [PATCH 3/5] DT: update ti,irq-crossbar binding Marc Zyngier
2014-12-06 13:46 ` [PATCH 4/5] irqchip: GIC: get rid of routable domain Marc Zyngier
2014-12-06 13:46 ` [PATCH 5/5] DT: arm,gic: kill arm,routable-irqs Marc Zyngier
2014-12-07 17:16 ` [PATCH 0/5] irqchip: kill the GIC routable domain Nishanth Menon
2014-12-07 17:16   ` Nishanth Menon
2014-12-07 18:03   ` Nishanth Menon
2014-12-07 18:03     ` Nishanth Menon
2014-12-08  9:10     ` Marc Zyngier
2014-12-08  9:10       ` Marc Zyngier
2014-12-08 22:41       ` Nishanth Menon
2014-12-08 22:41         ` Nishanth Menon
2014-12-09  9:53         ` Marc Zyngier
2014-12-09  9:53           ` Marc Zyngier
2014-12-09 18:17           ` Nishanth Menon
2014-12-09 18:17             ` Nishanth Menon
2014-12-09 18:40             ` Marc Zyngier
2014-12-09 18:40               ` Marc Zyngier
2014-12-10 18:21               ` Nishanth Menon [this message]
2014-12-10 18:21                 ` Nishanth Menon
2015-01-07 16:14                 ` Nishanth Menon
2015-01-07 16:14                   ` Nishanth Menon
2015-01-07 16:09               ` Jason Cooper
2015-01-07 16:09                 ` Jason Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54888F3A.5010800@ti.com \
    --to=nm@ti.com \
    --cc=bcousson@baylibre.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=ssantosh@kernel.org \
    --cc=stefan@agner.ch \
    --cc=tglx@linutronix.de \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.