From: Matthias Brugger <matthias.bgg@gmail.com> To: Eduardo Valentin <edubezval@gmail.com>, s.hauer@pengutronix.de Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, kernel@pengutronix.de, rui.zhang@intel.com, linux-arm-kernel@lists.infradead.org, djkurtz@chromium.org, eddie.huang@mediatek.com Subject: Re: [PATCH 1/1] thermal: small style cleanup in mtk_thermal Date: Thu, 18 Feb 2016 16:56:40 +0100 [thread overview] Message-ID: <56C5E9B8.6030300@gmail.com> (raw) In-Reply-To: <1455810625-20509-1-git-send-email-edubezval@gmail.com> On 18/02/16 16:50, Eduardo Valentin wrote: > Remove all checkpatch.pl --strict errors, checks, and warnings. > > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: Matthias Brugger <matthias.bgg@gmail.com> > Cc: linux-pm@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-mediatek@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > Signed-off-by: Eduardo Valentin <edubezval@gmail.com> > --- Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> > Sascha, > > Add your v12 in my forlinus branch. But also, on top of it > I cleaned the patch further with the following patch. > > BR, > > Eduardo > > drivers/thermal/mtk_thermal.c | 56 ++++++++++++++++++++++--------------------- > 1 file changed, 29 insertions(+), 27 deletions(-) > > diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c > index 589a138..3d93b1c 100644 > --- a/drivers/thermal/mtk_thermal.c > +++ b/drivers/thermal/mtk_thermal.c > @@ -78,7 +78,7 @@ > > #define TEMP_MONCTL1_PERIOD_UNIT(x) ((x) & 0x3ff) > > -#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff)) << 16 > +#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff) << 16) > #define TEMP_MONCTL2_SENSOR_INTERVAL(x) ((x) & 0x3ff) > > #define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x) (x) > @@ -108,15 +108,15 @@ > #define MT8173_NUM_SENSORS_PER_ZONE 4 > > /* Layout of the fuses providing the calibration data */ > -#define MT8173_CALIB_BUF0_VALID (1 << 0) > -#define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22 ) & 0x3ff) > -#define MT8173_CALIB_BUF0_VTS_TS1(x) (((x) >> 17 ) & 0x1ff) > -#define MT8173_CALIB_BUF0_VTS_TS2(x) (((x) >> 8 ) & 0x1ff) > -#define MT8173_CALIB_BUF1_VTS_TS3(x) (((x) >> 0 ) & 0x1ff) > -#define MT8173_CALIB_BUF2_VTS_TS4(x) (((x) >> 23 ) & 0x1ff) > -#define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14 ) & 0x1ff) > -#define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1 ) & 0x3f) > -#define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26 ) & 0x3f) > +#define MT8173_CALIB_BUF0_VALID BIT(0) > +#define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff) > +#define MT8173_CALIB_BUF0_VTS_TS1(x) (((x) >> 17) & 0x1ff) > +#define MT8173_CALIB_BUF0_VTS_TS2(x) (((x) >> 8) & 0x1ff) > +#define MT8173_CALIB_BUF1_VTS_TS3(x) (((x) >> 0) & 0x1ff) > +#define MT8173_CALIB_BUF2_VTS_TS4(x) (((x) >> 23) & 0x1ff) > +#define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14) & 0x1ff) > +#define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f) > +#define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f) > > #define THERMAL_NAME "mtk-thermal" > > @@ -136,6 +136,7 @@ struct mtk_thermal { > > struct mtk_thermal_bank banks[MT8173_NUM_ZONES]; > > + /* lock: for getting and putting banks */ > struct mutex lock; > > /* Calibration values */ > @@ -271,11 +272,9 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank) > static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) > { > struct mtk_thermal *mt = bank->mt; > - int temp, i, max; > + int i, temp = INT_MIN, max = INT_MIN; > u32 raw; > > - temp = max = INT_MIN; > - > for (i = 0; i < bank_data[bank->id].num_sensors; i++) { > raw = readl(mt->thermal_base + sensing_points[i].msr); > > @@ -322,7 +321,7 @@ static const struct thermal_zone_of_device_ops mtk_thermal_ops = { > }; > > static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, > - u32 apmixed_phys_base, u32 auxadc_phys_base) > + u32 apmixed_phys_base, u32 auxadc_phys_base) > { > struct mtk_thermal_bank *bank = &mt->banks[num]; > const struct mtk_thermal_bank_cfg *cfg = &bank_data[num]; > @@ -346,7 +345,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, > > /* poll is set to 10u */ > writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768), > - mt->thermal_base + TEMP_AHBPOLL); > + mt->thermal_base + TEMP_AHBPOLL); > > /* temperature sampling control, 1 sample */ > writel(0x0, mt->thermal_base + TEMP_MSRCTL0); > @@ -375,49 +374,50 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, > > /* AHB address for auxadc mux selection */ > writel(auxadc_phys_base + AUXADC_CON1_CLR_V, > - mt->thermal_base + TEMP_ADCMUXADDR); > + mt->thermal_base + TEMP_ADCMUXADDR); > > /* AHB address for pnp sensor mux selection */ > writel(apmixed_phys_base + APMIXED_SYS_TS_CON1, > - mt->thermal_base + TEMP_PNPMUXADDR); > + mt->thermal_base + TEMP_PNPMUXADDR); > > /* AHB value for auxadc enable */ > writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCEN); > > /* AHB address for auxadc enable (channel 0 immediate mode selected) */ > writel(auxadc_phys_base + AUXADC_CON1_SET_V, > - mt->thermal_base + TEMP_ADCENADDR); > + mt->thermal_base + TEMP_ADCENADDR); > > /* AHB address for auxadc valid bit */ > writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), > - mt->thermal_base + TEMP_ADCVALIDADDR); > + mt->thermal_base + TEMP_ADCVALIDADDR); > > /* AHB address for auxadc voltage output */ > writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), > - mt->thermal_base + TEMP_ADCVOLTADDR); > + mt->thermal_base + TEMP_ADCVOLTADDR); > > /* read valid & voltage are at the same register */ > writel(0x0, mt->thermal_base + TEMP_RDCTRL); > > /* indicate where the valid bit is */ > writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12), > - mt->thermal_base + TEMP_ADCVALIDMASK); > + mt->thermal_base + TEMP_ADCVALIDMASK); > > /* no shift */ > writel(0x0, mt->thermal_base + TEMP_ADCVOLTAGESHIFT); > > /* enable auxadc mux write transaction */ > writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE, > - mt->thermal_base + TEMP_ADCWRITECTRL); > + mt->thermal_base + TEMP_ADCWRITECTRL); > > for (i = 0; i < cfg->num_sensors; i++) > writel(sensor_mux_values[cfg->sensors[i]], > - mt->thermal_base + sensing_points[i].adcpnp); > + mt->thermal_base + sensing_points[i].adcpnp); > > writel((1 << cfg->num_sensors) - 1, mt->thermal_base + TEMP_MONCTL0); > > - writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | TEMP_ADCWRITECTRL_ADC_MUX_WRITE, > - mt->thermal_base + TEMP_ADCWRITECTRL); > + writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | > + TEMP_ADCWRITECTRL_ADC_MUX_WRITE, > + mt->thermal_base + TEMP_ADCWRITECTRL); > > mtk_thermal_put_bank(bank); > } > @@ -434,7 +434,8 @@ static u64 of_get_phys_base(struct device_node *np) > return of_translate_address(np, regaddr_p); > } > > -static int mtk_thermal_get_calibration_data(struct device *dev, struct mtk_thermal *mt) > +static int mtk_thermal_get_calibration_data(struct device *dev, > + struct mtk_thermal *mt) > { > struct nvmem_cell *cell; > u32 *buf; > @@ -567,7 +568,8 @@ static int mtk_thermal_probe(struct platform_device *pdev) > } > > for (i = 0; i < MT8173_NUM_ZONES; i++) > - mtk_thermal_init_bank(mt, i, apmixed_phys_base, auxadc_phys_base); > + mtk_thermal_init_bank(mt, i, apmixed_phys_base, > + auxadc_phys_base); > > platform_set_drvdata(pdev, mt); > >
WARNING: multiple messages have this Message-ID (diff)
From: matthias.bgg@gmail.com (Matthias Brugger) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/1] thermal: small style cleanup in mtk_thermal Date: Thu, 18 Feb 2016 16:56:40 +0100 [thread overview] Message-ID: <56C5E9B8.6030300@gmail.com> (raw) In-Reply-To: <1455810625-20509-1-git-send-email-edubezval@gmail.com> On 18/02/16 16:50, Eduardo Valentin wrote: > Remove all checkpatch.pl --strict errors, checks, and warnings. > > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: Matthias Brugger <matthias.bgg@gmail.com> > Cc: linux-pm at vger.kernel.org > Cc: linux-arm-kernel at lists.infradead.org > Cc: linux-mediatek at lists.infradead.org > Cc: linux-kernel at vger.kernel.org > Signed-off-by: Eduardo Valentin <edubezval@gmail.com> > --- Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> > Sascha, > > Add your v12 in my forlinus branch. But also, on top of it > I cleaned the patch further with the following patch. > > BR, > > Eduardo > > drivers/thermal/mtk_thermal.c | 56 ++++++++++++++++++++++--------------------- > 1 file changed, 29 insertions(+), 27 deletions(-) > > diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c > index 589a138..3d93b1c 100644 > --- a/drivers/thermal/mtk_thermal.c > +++ b/drivers/thermal/mtk_thermal.c > @@ -78,7 +78,7 @@ > > #define TEMP_MONCTL1_PERIOD_UNIT(x) ((x) & 0x3ff) > > -#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff)) << 16 > +#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff) << 16) > #define TEMP_MONCTL2_SENSOR_INTERVAL(x) ((x) & 0x3ff) > > #define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x) (x) > @@ -108,15 +108,15 @@ > #define MT8173_NUM_SENSORS_PER_ZONE 4 > > /* Layout of the fuses providing the calibration data */ > -#define MT8173_CALIB_BUF0_VALID (1 << 0) > -#define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22 ) & 0x3ff) > -#define MT8173_CALIB_BUF0_VTS_TS1(x) (((x) >> 17 ) & 0x1ff) > -#define MT8173_CALIB_BUF0_VTS_TS2(x) (((x) >> 8 ) & 0x1ff) > -#define MT8173_CALIB_BUF1_VTS_TS3(x) (((x) >> 0 ) & 0x1ff) > -#define MT8173_CALIB_BUF2_VTS_TS4(x) (((x) >> 23 ) & 0x1ff) > -#define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14 ) & 0x1ff) > -#define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1 ) & 0x3f) > -#define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26 ) & 0x3f) > +#define MT8173_CALIB_BUF0_VALID BIT(0) > +#define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff) > +#define MT8173_CALIB_BUF0_VTS_TS1(x) (((x) >> 17) & 0x1ff) > +#define MT8173_CALIB_BUF0_VTS_TS2(x) (((x) >> 8) & 0x1ff) > +#define MT8173_CALIB_BUF1_VTS_TS3(x) (((x) >> 0) & 0x1ff) > +#define MT8173_CALIB_BUF2_VTS_TS4(x) (((x) >> 23) & 0x1ff) > +#define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14) & 0x1ff) > +#define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f) > +#define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f) > > #define THERMAL_NAME "mtk-thermal" > > @@ -136,6 +136,7 @@ struct mtk_thermal { > > struct mtk_thermal_bank banks[MT8173_NUM_ZONES]; > > + /* lock: for getting and putting banks */ > struct mutex lock; > > /* Calibration values */ > @@ -271,11 +272,9 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank) > static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) > { > struct mtk_thermal *mt = bank->mt; > - int temp, i, max; > + int i, temp = INT_MIN, max = INT_MIN; > u32 raw; > > - temp = max = INT_MIN; > - > for (i = 0; i < bank_data[bank->id].num_sensors; i++) { > raw = readl(mt->thermal_base + sensing_points[i].msr); > > @@ -322,7 +321,7 @@ static const struct thermal_zone_of_device_ops mtk_thermal_ops = { > }; > > static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, > - u32 apmixed_phys_base, u32 auxadc_phys_base) > + u32 apmixed_phys_base, u32 auxadc_phys_base) > { > struct mtk_thermal_bank *bank = &mt->banks[num]; > const struct mtk_thermal_bank_cfg *cfg = &bank_data[num]; > @@ -346,7 +345,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, > > /* poll is set to 10u */ > writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768), > - mt->thermal_base + TEMP_AHBPOLL); > + mt->thermal_base + TEMP_AHBPOLL); > > /* temperature sampling control, 1 sample */ > writel(0x0, mt->thermal_base + TEMP_MSRCTL0); > @@ -375,49 +374,50 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, > > /* AHB address for auxadc mux selection */ > writel(auxadc_phys_base + AUXADC_CON1_CLR_V, > - mt->thermal_base + TEMP_ADCMUXADDR); > + mt->thermal_base + TEMP_ADCMUXADDR); > > /* AHB address for pnp sensor mux selection */ > writel(apmixed_phys_base + APMIXED_SYS_TS_CON1, > - mt->thermal_base + TEMP_PNPMUXADDR); > + mt->thermal_base + TEMP_PNPMUXADDR); > > /* AHB value for auxadc enable */ > writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCEN); > > /* AHB address for auxadc enable (channel 0 immediate mode selected) */ > writel(auxadc_phys_base + AUXADC_CON1_SET_V, > - mt->thermal_base + TEMP_ADCENADDR); > + mt->thermal_base + TEMP_ADCENADDR); > > /* AHB address for auxadc valid bit */ > writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), > - mt->thermal_base + TEMP_ADCVALIDADDR); > + mt->thermal_base + TEMP_ADCVALIDADDR); > > /* AHB address for auxadc voltage output */ > writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), > - mt->thermal_base + TEMP_ADCVOLTADDR); > + mt->thermal_base + TEMP_ADCVOLTADDR); > > /* read valid & voltage are at the same register */ > writel(0x0, mt->thermal_base + TEMP_RDCTRL); > > /* indicate where the valid bit is */ > writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12), > - mt->thermal_base + TEMP_ADCVALIDMASK); > + mt->thermal_base + TEMP_ADCVALIDMASK); > > /* no shift */ > writel(0x0, mt->thermal_base + TEMP_ADCVOLTAGESHIFT); > > /* enable auxadc mux write transaction */ > writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE, > - mt->thermal_base + TEMP_ADCWRITECTRL); > + mt->thermal_base + TEMP_ADCWRITECTRL); > > for (i = 0; i < cfg->num_sensors; i++) > writel(sensor_mux_values[cfg->sensors[i]], > - mt->thermal_base + sensing_points[i].adcpnp); > + mt->thermal_base + sensing_points[i].adcpnp); > > writel((1 << cfg->num_sensors) - 1, mt->thermal_base + TEMP_MONCTL0); > > - writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | TEMP_ADCWRITECTRL_ADC_MUX_WRITE, > - mt->thermal_base + TEMP_ADCWRITECTRL); > + writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | > + TEMP_ADCWRITECTRL_ADC_MUX_WRITE, > + mt->thermal_base + TEMP_ADCWRITECTRL); > > mtk_thermal_put_bank(bank); > } > @@ -434,7 +434,8 @@ static u64 of_get_phys_base(struct device_node *np) > return of_translate_address(np, regaddr_p); > } > > -static int mtk_thermal_get_calibration_data(struct device *dev, struct mtk_thermal *mt) > +static int mtk_thermal_get_calibration_data(struct device *dev, > + struct mtk_thermal *mt) > { > struct nvmem_cell *cell; > u32 *buf; > @@ -567,7 +568,8 @@ static int mtk_thermal_probe(struct platform_device *pdev) > } > > for (i = 0; i < MT8173_NUM_ZONES; i++) > - mtk_thermal_init_bank(mt, i, apmixed_phys_base, auxadc_phys_base); > + mtk_thermal_init_bank(mt, i, apmixed_phys_base, > + auxadc_phys_base); > > platform_set_drvdata(pdev, mt); > >
next prev parent reply other threads:[~2016-02-18 15:56 UTC|newest] Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-11-30 11:42 [PATCH v12] Add Mediatek thermal support Sascha Hauer 2015-11-30 11:42 ` Sascha Hauer 2015-11-30 11:42 ` [PATCH 1/3] dt-bindings: thermal: Add binding document for Mediatek thermal controller Sascha Hauer 2015-11-30 11:42 ` Sascha Hauer 2015-12-16 11:23 ` Daniel Kurtz 2015-12-16 11:23 ` Daniel Kurtz 2015-12-16 11:23 ` Daniel Kurtz 2015-12-17 19:23 ` Eduardo Valentin 2015-12-17 19:23 ` Eduardo Valentin 2015-12-17 19:23 ` Eduardo Valentin 2015-12-18 7:16 ` Sascha Hauer 2015-12-18 7:16 ` Sascha Hauer 2015-12-18 7:16 ` Sascha Hauer 2015-12-20 2:12 ` Eduardo Valentin 2015-12-20 2:12 ` Eduardo Valentin 2015-12-20 2:12 ` Eduardo Valentin 2015-11-30 11:42 ` [PATCH 2/3] thermal: Add Mediatek thermal controller support Sascha Hauer 2015-11-30 11:42 ` Sascha Hauer 2015-12-17 19:33 ` Eduardo Valentin 2015-12-17 19:33 ` Eduardo Valentin 2016-01-04 14:19 ` Sascha Hauer 2016-01-04 14:19 ` Sascha Hauer 2016-01-19 7:29 ` Sascha Hauer 2016-01-19 7:29 ` Sascha Hauer 2016-02-01 2:54 ` Eddie Huang 2016-02-01 2:54 ` Eddie Huang 2016-02-01 2:54 ` Eddie Huang 2016-02-15 2:11 ` Daniel Kurtz 2016-02-15 2:11 ` Daniel Kurtz 2016-02-15 2:11 ` Daniel Kurtz 2016-02-15 2:14 ` Daniel Kurtz 2016-02-15 2:14 ` Daniel Kurtz 2016-02-15 2:14 ` Daniel Kurtz 2016-02-17 17:05 ` Matthias Brugger 2016-02-17 17:05 ` Matthias Brugger 2016-02-17 17:05 ` Matthias Brugger 2016-02-18 10:56 ` Sascha Hauer 2016-02-18 10:56 ` Sascha Hauer 2016-02-18 10:56 ` Sascha Hauer 2016-02-18 14:28 ` Javi Merino 2016-02-18 14:28 ` Javi Merino 2016-02-18 14:28 ` Javi Merino 2016-02-18 15:15 ` Eduardo Valentin 2016-02-18 15:15 ` Eduardo Valentin 2016-02-18 15:15 ` Eduardo Valentin 2016-02-19 7:21 ` Sascha Hauer 2016-02-19 7:21 ` Sascha Hauer 2016-02-19 7:21 ` Sascha Hauer 2015-12-21 4:07 ` Daniel Kurtz 2015-12-21 4:07 ` Daniel Kurtz 2015-12-21 4:07 ` Daniel Kurtz 2016-01-04 14:31 ` Sascha Hauer 2016-01-04 14:31 ` Sascha Hauer 2016-01-04 14:31 ` Sascha Hauer 2016-01-04 15:43 ` Daniel Kurtz 2016-01-04 15:43 ` Daniel Kurtz 2016-01-04 15:43 ` Daniel Kurtz 2015-11-30 11:42 ` [PATCH 3/3] ARM64: dts: mt8173: Add thermal/auxadc device nodes Sascha Hauer 2015-11-30 11:42 ` Sascha Hauer 2016-02-18 16:18 ` Matthias Brugger 2016-02-18 16:18 ` Matthias Brugger 2016-02-19 7:20 ` Sascha Hauer 2016-02-19 7:20 ` Sascha Hauer 2016-04-20 11:23 ` Matthias Brugger 2016-04-20 11:23 ` Matthias Brugger 2015-12-14 10:37 ` [PATCH v12] Add Mediatek thermal support Sascha Hauer 2015-12-14 10:37 ` Sascha Hauer 2015-12-14 10:37 ` Sascha Hauer 2015-12-14 21:08 ` Eduardo Valentin 2015-12-14 21:08 ` Eduardo Valentin 2016-02-18 15:50 ` [PATCH 1/1] thermal: small style cleanup in mtk_thermal Eduardo Valentin 2016-02-18 15:50 ` Eduardo Valentin 2016-02-18 15:56 ` Matthias Brugger [this message] 2016-02-18 15:56 ` Matthias Brugger 2016-02-18 15:53 ` [PATCH v12] Add Mediatek thermal support Eduardo Valentin 2016-02-18 15:53 ` Eduardo Valentin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=56C5E9B8.6030300@gmail.com \ --to=matthias.bgg@gmail.com \ --cc=djkurtz@chromium.org \ --cc=eddie.huang@mediatek.com \ --cc=edubezval@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=linux-pm@vger.kernel.org \ --cc=rui.zhang@intel.com \ --cc=s.hauer@pengutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.