From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org, bgolaszewski@baylibre.com,
akpm@linux-foundation.org
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arch@vger.kernel.org, andriy.shevchenko@linux.intel.com,
linux@rasmusvillemoes.dk, yamada.masahiro@socionext.com,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
geert@linux-m68k.org, preid@electromag.com.au, lukas@wunner.de,
William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: [PATCH v18 09/14] gpio: uniphier: Utilize for_each_set_clump8 macro
Date: Wed, 9 Oct 2019 13:14:45 -0400 [thread overview]
Message-ID: <5b24887e97f3093e4832d7c50a1093f537e91ab4.1570641097.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1570641097.git.vilhelm.gray@gmail.com>
Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity. An
improvement in this case is that banks that are not masked will now be
skipped.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/gpio-uniphier.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
index 93cdcc41e9fb..3db9c41b7954 100644
--- a/drivers/gpio/gpio-uniphier.c
+++ b/drivers/gpio/gpio-uniphier.c
@@ -15,9 +15,6 @@
#include <linux/spinlock.h>
#include <dt-bindings/gpio/uniphier-gpio.h>
-#define UNIPHIER_GPIO_BANK_MASK \
- GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0)
-
#define UNIPHIER_GPIO_IRQ_MAX_NUM 24
#define UNIPHIER_GPIO_PORT_DATA 0x0 /* data */
@@ -147,15 +144,11 @@ static void uniphier_gpio_set(struct gpio_chip *chip,
static void uniphier_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
- unsigned int bank, shift, bank_mask, bank_bits;
- int i;
+ unsigned long i, bank, bank_mask, bank_bits;
- for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) {
+ for_each_set_clump8(i, bank_mask, mask, chip->ngpio) {
bank = i / UNIPHIER_GPIO_LINES_PER_BANK;
- shift = i % BITS_PER_LONG;
- bank_mask = (mask[BIT_WORD(i)] >> shift) &
- UNIPHIER_GPIO_BANK_MASK;
- bank_bits = bits[BIT_WORD(i)] >> shift;
+ bank_bits = bitmap_get_value8(bits, i);
uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA,
bank_mask, bank_bits);
--
2.23.0
WARNING: multiple messages have this Message-ID (diff)
From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org, bgolaszewski@baylibre.com,
akpm@linux-foundation.org
Cc: linux-arch@vger.kernel.org, preid@electromag.com.au,
yamada.masahiro@socionext.com, linux-pm@vger.kernel.org,
linux@rasmusvillemoes.dk, linux-kernel@vger.kernel.org,
William Breathitt Gray <vilhelm.gray@gmail.com>,
linux-gpio@vger.kernel.org, lukas@wunner.de,
geert@linux-m68k.org, andriy.shevchenko@linux.intel.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v18 09/14] gpio: uniphier: Utilize for_each_set_clump8 macro
Date: Wed, 9 Oct 2019 13:14:45 -0400 [thread overview]
Message-ID: <5b24887e97f3093e4832d7c50a1093f537e91ab4.1570641097.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1570641097.git.vilhelm.gray@gmail.com>
Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity. An
improvement in this case is that banks that are not masked will now be
skipped.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/gpio-uniphier.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
index 93cdcc41e9fb..3db9c41b7954 100644
--- a/drivers/gpio/gpio-uniphier.c
+++ b/drivers/gpio/gpio-uniphier.c
@@ -15,9 +15,6 @@
#include <linux/spinlock.h>
#include <dt-bindings/gpio/uniphier-gpio.h>
-#define UNIPHIER_GPIO_BANK_MASK \
- GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0)
-
#define UNIPHIER_GPIO_IRQ_MAX_NUM 24
#define UNIPHIER_GPIO_PORT_DATA 0x0 /* data */
@@ -147,15 +144,11 @@ static void uniphier_gpio_set(struct gpio_chip *chip,
static void uniphier_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
- unsigned int bank, shift, bank_mask, bank_bits;
- int i;
+ unsigned long i, bank, bank_mask, bank_bits;
- for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) {
+ for_each_set_clump8(i, bank_mask, mask, chip->ngpio) {
bank = i / UNIPHIER_GPIO_LINES_PER_BANK;
- shift = i % BITS_PER_LONG;
- bank_mask = (mask[BIT_WORD(i)] >> shift) &
- UNIPHIER_GPIO_BANK_MASK;
- bank_bits = bits[BIT_WORD(i)] >> shift;
+ bank_bits = bitmap_get_value8(bits, i);
uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA,
bank_mask, bank_bits);
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-09 17:15 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 17:14 [PATCH v18 00/14] Introduce the for_each_set_clump8 macro William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 01/14] bitops: " William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 21:18 ` Andrew Morton
2019-10-09 21:18 ` Andrew Morton
2019-10-09 21:18 ` Andrew Morton
2019-10-10 13:18 ` Andy Shevchenko
2019-10-10 13:18 ` Andy Shevchenko
2019-10-09 17:14 ` [PATCH v18 02/14] lib/test_bitmap.c: Add for_each_set_clump8 test cases William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 03/14] gpio: 104-dio-48e: Utilize for_each_set_clump8 macro William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 04/14] gpio: 104-idi-48: " William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 05/14] gpio: gpio-mm: " William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 06/14] gpio: ws16c48: " William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 07/14] gpio: pci-idio-16: " William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 08/14] gpio: pcie-idio-24: " William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray [this message]
2019-10-09 17:14 ` [PATCH v18 09/14] gpio: uniphier: " William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 10/14] gpio: 74x164: Utilize the " William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-10 13:16 ` Andy Shevchenko
2019-10-10 13:16 ` Andy Shevchenko
2019-10-09 17:14 ` [PATCH v18 11/14] thermal: intel: intel_soc_dts_iosf: Utilize " William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 12/14] gpio: pisosr: Utilize the " William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 13/14] gpio: max3191x: " William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 14/14] gpio: pca953x: " William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-10 13:16 ` Andy Shevchenko
2019-10-10 13:16 ` Andy Shevchenko
2019-10-09 17:38 ` [PATCH v18 00/14] Introduce " Andy Shevchenko
2019-10-09 17:38 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5b24887e97f3093e4832d7c50a1093f537e91ab4.1570641097.git.vilhelm.gray@gmail.com \
--to=vilhelm.gray@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=geert@linux-m68k.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=lukas@wunner.de \
--cc=preid@electromag.com.au \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.