All of lore.kernel.org
 help / color / mirror / Atom feed
From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org, bgolaszewski@baylibre.com,
	akpm@linux-foundation.org
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arch@vger.kernel.org, andriy.shevchenko@linux.intel.com,
	linux@rasmusvillemoes.dk, yamada.masahiro@socionext.com,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	geert@linux-m68k.org, preid@electromag.com.au, lukas@wunner.de,
	William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: [PATCH v18 08/14] gpio: pcie-idio-24: Utilize for_each_set_clump8 macro
Date: Wed,  9 Oct 2019 13:14:44 -0400	[thread overview]
Message-ID: <d5d22fa9809dcf8330f4381dbe7e7ca37990e79f.1570641097.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1570641097.git.vilhelm.gray@gmail.com>

Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/gpio/gpio-pcie-idio-24.c | 109 ++++++++++++-------------------
 1 file changed, 40 insertions(+), 69 deletions(-)

diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c
index 52f1647a46fd..924ec916b358 100644
--- a/drivers/gpio/gpio-pcie-idio-24.c
+++ b/drivers/gpio/gpio-pcie-idio-24.c
@@ -198,52 +198,34 @@ static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
 	unsigned long *mask, unsigned long *bits)
 {
 	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
-	size_t i;
-	const unsigned int gpio_reg_size = 8;
-	unsigned int bits_offset;
-	size_t word_index;
-	unsigned int word_offset;
-	unsigned long word_mask;
-	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
-	unsigned long port_state;
+	unsigned long offset;
+	unsigned long gpio_mask;
 	void __iomem *ports[] = {
 		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
 		&idio24gpio->reg->out16_23, &idio24gpio->reg->in0_7,
 		&idio24gpio->reg->in8_15, &idio24gpio->reg->in16_23,
 	};
+	size_t index;
+	unsigned long port_state;
 	const unsigned long out_mode_mask = BIT(1);
 
 	/* clear bits array to a clean slate */
 	bitmap_zero(bits, chip->ngpio);
 
-	/* get bits are evaluated a gpio port register at a time */
-	for (i = 0; i < ARRAY_SIZE(ports) + 1; i++) {
-		/* gpio offset in bits array */
-		bits_offset = i * gpio_reg_size;
-
-		/* word index for bits array */
-		word_index = BIT_WORD(bits_offset);
-
-		/* gpio offset within current word of bits array */
-		word_offset = bits_offset % BITS_PER_LONG;
-
-		/* mask of get bits for current gpio within current word */
-		word_mask = mask[word_index] & (port_mask << word_offset);
-		if (!word_mask) {
-			/* no get bits in this port so skip to next one */
-			continue;
-		}
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		index = offset / 8;
 
 		/* read bits from current gpio port (port 6 is TTL GPIO) */
-		if (i < 6)
-			port_state = ioread8(ports[i]);
+		if (index < 6)
+			port_state = ioread8(ports[index]);
 		else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
 			port_state = ioread8(&idio24gpio->reg->ttl_out0_7);
 		else
 			port_state = ioread8(&idio24gpio->reg->ttl_in0_7);
 
-		/* store acquired bits at respective bits array offset */
-		bits[word_index] |= (port_state << word_offset) & word_mask;
+		port_state &= gpio_mask;
+
+		bitmap_set_value8(bits, port_state, offset);
 	}
 
 	return 0;
@@ -294,59 +276,48 @@ static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
 	unsigned long *mask, unsigned long *bits)
 {
 	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
-	size_t i;
-	unsigned long bits_offset;
+	unsigned long offset;
 	unsigned long gpio_mask;
-	const unsigned int gpio_reg_size = 8;
-	const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
-	unsigned long flags;
-	unsigned int out_state;
 	void __iomem *ports[] = {
 		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
 		&idio24gpio->reg->out16_23
 	};
+	size_t index;
+	unsigned long bitmask;
+	unsigned long flags;
+	unsigned long out_state;
 	const unsigned long out_mode_mask = BIT(1);
-	const unsigned int ttl_offset = 48;
-	const size_t ttl_i = BIT_WORD(ttl_offset);
-	const unsigned int word_offset = ttl_offset % BITS_PER_LONG;
-	const unsigned long ttl_mask = (mask[ttl_i] >> word_offset) & port_mask;
-	const unsigned long ttl_bits = (bits[ttl_i] >> word_offset) & ttl_mask;
-
-	/* set bits are processed a gpio port register at a time */
-	for (i = 0; i < ARRAY_SIZE(ports); i++) {
-		/* gpio offset in bits array */
-		bits_offset = i * gpio_reg_size;
-
-		/* check if any set bits for current port */
-		gpio_mask = (*mask >> bits_offset) & port_mask;
-		if (!gpio_mask) {
-			/* no set bits for this port so move on to next port */
-			continue;
-		}
 
-		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		index = offset / 8;
 
-		/* process output lines */
-		out_state = ioread8(ports[i]) & ~gpio_mask;
-		out_state |= (*bits >> bits_offset) & gpio_mask;
-		iowrite8(out_state, ports[i]);
+		bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
 
-		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
-	}
+		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
 
-	/* check if setting TTL lines and if they are in output mode */
-	if (!ttl_mask || !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask))
-		return;
+		/* read bits from current gpio port (port 6 is TTL GPIO) */
+		if (index < 6) {
+			out_state = ioread8(ports[index]);
+		} else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask) {
+			out_state = ioread8(&idio24gpio->reg->ttl_out0_7);
+		} else {
+			/* skip TTL GPIO if set for input */
+			raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+			continue;
+		}
 
-	/* handle TTL output */
-	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+		/* set requested bit states */
+		out_state &= ~gpio_mask;
+		out_state |= bitmask;
 
-	/* process output lines */
-	out_state = ioread8(&idio24gpio->reg->ttl_out0_7) & ~ttl_mask;
-	out_state |= ttl_bits;
-	iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
+		/* write bits for current gpio port (port 6 is TTL GPIO) */
+		if (index < 6)
+			iowrite8(out_state, ports[index]);
+		else
+			iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
 
-	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+	}
 }
 
 static void idio_24_irq_ack(struct irq_data *data)
-- 
2.23.0


WARNING: multiple messages have this Message-ID (diff)
From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org, bgolaszewski@baylibre.com,
	akpm@linux-foundation.org
Cc: linux-arch@vger.kernel.org, preid@electromag.com.au,
	yamada.masahiro@socionext.com, linux-pm@vger.kernel.org,
	linux@rasmusvillemoes.dk, linux-kernel@vger.kernel.org,
	William Breathitt Gray <vilhelm.gray@gmail.com>,
	linux-gpio@vger.kernel.org, lukas@wunner.de,
	geert@linux-m68k.org, andriy.shevchenko@linux.intel.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v18 08/14] gpio: pcie-idio-24: Utilize for_each_set_clump8 macro
Date: Wed,  9 Oct 2019 13:14:44 -0400	[thread overview]
Message-ID: <d5d22fa9809dcf8330f4381dbe7e7ca37990e79f.1570641097.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1570641097.git.vilhelm.gray@gmail.com>

Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/gpio/gpio-pcie-idio-24.c | 109 ++++++++++++-------------------
 1 file changed, 40 insertions(+), 69 deletions(-)

diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c
index 52f1647a46fd..924ec916b358 100644
--- a/drivers/gpio/gpio-pcie-idio-24.c
+++ b/drivers/gpio/gpio-pcie-idio-24.c
@@ -198,52 +198,34 @@ static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
 	unsigned long *mask, unsigned long *bits)
 {
 	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
-	size_t i;
-	const unsigned int gpio_reg_size = 8;
-	unsigned int bits_offset;
-	size_t word_index;
-	unsigned int word_offset;
-	unsigned long word_mask;
-	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
-	unsigned long port_state;
+	unsigned long offset;
+	unsigned long gpio_mask;
 	void __iomem *ports[] = {
 		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
 		&idio24gpio->reg->out16_23, &idio24gpio->reg->in0_7,
 		&idio24gpio->reg->in8_15, &idio24gpio->reg->in16_23,
 	};
+	size_t index;
+	unsigned long port_state;
 	const unsigned long out_mode_mask = BIT(1);
 
 	/* clear bits array to a clean slate */
 	bitmap_zero(bits, chip->ngpio);
 
-	/* get bits are evaluated a gpio port register at a time */
-	for (i = 0; i < ARRAY_SIZE(ports) + 1; i++) {
-		/* gpio offset in bits array */
-		bits_offset = i * gpio_reg_size;
-
-		/* word index for bits array */
-		word_index = BIT_WORD(bits_offset);
-
-		/* gpio offset within current word of bits array */
-		word_offset = bits_offset % BITS_PER_LONG;
-
-		/* mask of get bits for current gpio within current word */
-		word_mask = mask[word_index] & (port_mask << word_offset);
-		if (!word_mask) {
-			/* no get bits in this port so skip to next one */
-			continue;
-		}
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		index = offset / 8;
 
 		/* read bits from current gpio port (port 6 is TTL GPIO) */
-		if (i < 6)
-			port_state = ioread8(ports[i]);
+		if (index < 6)
+			port_state = ioread8(ports[index]);
 		else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
 			port_state = ioread8(&idio24gpio->reg->ttl_out0_7);
 		else
 			port_state = ioread8(&idio24gpio->reg->ttl_in0_7);
 
-		/* store acquired bits at respective bits array offset */
-		bits[word_index] |= (port_state << word_offset) & word_mask;
+		port_state &= gpio_mask;
+
+		bitmap_set_value8(bits, port_state, offset);
 	}
 
 	return 0;
@@ -294,59 +276,48 @@ static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
 	unsigned long *mask, unsigned long *bits)
 {
 	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
-	size_t i;
-	unsigned long bits_offset;
+	unsigned long offset;
 	unsigned long gpio_mask;
-	const unsigned int gpio_reg_size = 8;
-	const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
-	unsigned long flags;
-	unsigned int out_state;
 	void __iomem *ports[] = {
 		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
 		&idio24gpio->reg->out16_23
 	};
+	size_t index;
+	unsigned long bitmask;
+	unsigned long flags;
+	unsigned long out_state;
 	const unsigned long out_mode_mask = BIT(1);
-	const unsigned int ttl_offset = 48;
-	const size_t ttl_i = BIT_WORD(ttl_offset);
-	const unsigned int word_offset = ttl_offset % BITS_PER_LONG;
-	const unsigned long ttl_mask = (mask[ttl_i] >> word_offset) & port_mask;
-	const unsigned long ttl_bits = (bits[ttl_i] >> word_offset) & ttl_mask;
-
-	/* set bits are processed a gpio port register at a time */
-	for (i = 0; i < ARRAY_SIZE(ports); i++) {
-		/* gpio offset in bits array */
-		bits_offset = i * gpio_reg_size;
-
-		/* check if any set bits for current port */
-		gpio_mask = (*mask >> bits_offset) & port_mask;
-		if (!gpio_mask) {
-			/* no set bits for this port so move on to next port */
-			continue;
-		}
 
-		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		index = offset / 8;
 
-		/* process output lines */
-		out_state = ioread8(ports[i]) & ~gpio_mask;
-		out_state |= (*bits >> bits_offset) & gpio_mask;
-		iowrite8(out_state, ports[i]);
+		bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
 
-		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
-	}
+		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
 
-	/* check if setting TTL lines and if they are in output mode */
-	if (!ttl_mask || !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask))
-		return;
+		/* read bits from current gpio port (port 6 is TTL GPIO) */
+		if (index < 6) {
+			out_state = ioread8(ports[index]);
+		} else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask) {
+			out_state = ioread8(&idio24gpio->reg->ttl_out0_7);
+		} else {
+			/* skip TTL GPIO if set for input */
+			raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+			continue;
+		}
 
-	/* handle TTL output */
-	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+		/* set requested bit states */
+		out_state &= ~gpio_mask;
+		out_state |= bitmask;
 
-	/* process output lines */
-	out_state = ioread8(&idio24gpio->reg->ttl_out0_7) & ~ttl_mask;
-	out_state |= ttl_bits;
-	iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
+		/* write bits for current gpio port (port 6 is TTL GPIO) */
+		if (index < 6)
+			iowrite8(out_state, ports[index]);
+		else
+			iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
 
-	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+	}
 }
 
 static void idio_24_irq_ack(struct irq_data *data)
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-10-09 17:16 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09 17:14 [PATCH v18 00/14] Introduce the for_each_set_clump8 macro William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 01/14] bitops: " William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-09 21:18   ` Andrew Morton
2019-10-09 21:18     ` Andrew Morton
2019-10-09 21:18     ` Andrew Morton
2019-10-10 13:18     ` Andy Shevchenko
2019-10-10 13:18       ` Andy Shevchenko
2019-10-09 17:14 ` [PATCH v18 02/14] lib/test_bitmap.c: Add for_each_set_clump8 test cases William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 03/14] gpio: 104-dio-48e: Utilize for_each_set_clump8 macro William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 04/14] gpio: 104-idi-48: " William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 05/14] gpio: gpio-mm: " William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 06/14] gpio: ws16c48: " William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 07/14] gpio: pci-idio-16: " William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-09 17:14 ` William Breathitt Gray [this message]
2019-10-09 17:14   ` [PATCH v18 08/14] gpio: pcie-idio-24: " William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 09/14] gpio: uniphier: " William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 10/14] gpio: 74x164: Utilize the " William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-10 13:16   ` Andy Shevchenko
2019-10-10 13:16     ` Andy Shevchenko
2019-10-09 17:14 ` [PATCH v18 11/14] thermal: intel: intel_soc_dts_iosf: Utilize " William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 12/14] gpio: pisosr: Utilize the " William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 13/14] gpio: max3191x: " William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-09 17:14 ` [PATCH v18 14/14] gpio: pca953x: " William Breathitt Gray
2019-10-09 17:14   ` William Breathitt Gray
2019-10-10 13:16   ` Andy Shevchenko
2019-10-10 13:16     ` Andy Shevchenko
2019-10-09 17:38 ` [PATCH v18 00/14] Introduce " Andy Shevchenko
2019-10-09 17:38   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d5d22fa9809dcf8330f4381dbe7e7ca37990e79f.1570641097.git.vilhelm.gray@gmail.com \
    --to=vilhelm.gray@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=geert@linux-m68k.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@rasmusvillemoes.dk \
    --cc=lukas@wunner.de \
    --cc=preid@electromag.com.au \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.