All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Stephen Boyd <sboyd@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
	"Artur Świgoń" <a.swigon@partner.samsung.com>,
	"Abel Vesa" <abel.vesa@nxp.com>,
	"Saravana Kannan" <saravanak@google.com>,
	"Anson Huang" <Anson.Huang@nxp.com>,
	linux-arm-kernel@lists.infradead.org,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	linux-pm@vger.kernel.org, linux-imx@nxp.com,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	linux-clk@vger.kernel.org,
	"Kyungmin Park" <kyungmin.park@samsung.com>,
	"Alexandre Bailon" <abailon@baylibre.com>,
	kernel@pengutronix.de, "Dong Aisheng" <aisheng.dong@nxp.com>,
	"Fabio Estevam" <fabio.estevam@nxp.com>,
	"Georgi Djakov" <georgi.djakov@linaro.org>,
	devicetree@vger.kernel.org, "Jacky Bai" <ping.bai@nxp.com>
Subject: [PATCH v2 3/7] PM / devfreq: Add generic imx bus driver
Date: Tue, 20 Aug 2019 18:45:08 +0300	[thread overview]
Message-ID: <8726e078e0c0661eead993f26c1bd8546b63e6ab.1566315740.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1566315740.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1566315740.git.leonard.crestez@nxp.com>

Add initial support for dynamic frequency switching on pieces of the imx
interconnect fabric.

All this driver actually does is set a clk rate based on an opp table.

No attempt is made to map registers or anything clever.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/devfreq/Kconfig       |  12 +++
 drivers/devfreq/Makefile      |   1 +
 drivers/devfreq/imx-devfreq.c | 148 ++++++++++++++++++++++++++++++++++
 3 files changed, 161 insertions(+)
 create mode 100644 drivers/devfreq/imx-devfreq.c

diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index defe1d438710..9088a151bafe 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -90,10 +90,22 @@ config ARM_EXYNOS_BUS_DEVFREQ
 	  Each memory bus group could contain many memoby bus block. It reads
 	  PPMU counters of memory controllers by using DEVFREQ-event device
 	  and adjusts the operating frequencies and voltages with OPP support.
 	  This does not yet operate with optimal voltages.
 
+config ARM_IMX_DEVFREQ
+	tristate "i.MX DEVFREQ Driver"
+	depends on ARCH_MXC || COMPILE_TEST
+	select DEVFREQ_GOV_PASSIVE
+	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	select DEVFREQ_GOV_USERSPACE
+	select PM_OPP
+	help
+	  This adds the DEVFREQ driver for the i.MX family of SoCs.
+	  It allows adjusting frequencies for DDRC (DDR Controller) and various
+	  NICs and NOCs which form the SOC interconnect fabric
+
 config ARM_TEGRA_DEVFREQ
 	tristate "NVIDIA Tegra30/114/124/210 DEVFREQ Driver"
 	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_114_SOC || \
 		ARCH_TEGRA_132_SOC || ARCH_TEGRA_124_SOC || \
 		ARCH_TEGRA_210_SOC || \
diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index 338ae8440db6..c2463ed4c934 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -7,10 +7,11 @@ obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE)	+= governor_powersave.o
 obj-$(CONFIG_DEVFREQ_GOV_USERSPACE)	+= governor_userspace.o
 obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+= governor_passive.o
 
 # DEVFREQ Drivers
 obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
+obj-$(CONFIG_ARM_IMX_DEVFREQ)		+= imx-devfreq.o
 obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
 obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
 obj-$(CONFIG_ARM_TEGRA20_DEVFREQ)	+= tegra20-devfreq.o
 
 # DEVFREQ Event Drivers
diff --git a/drivers/devfreq/imx-devfreq.c b/drivers/devfreq/imx-devfreq.c
new file mode 100644
index 000000000000..5c907b3ab9c0
--- /dev/null
+++ b/drivers/devfreq/imx-devfreq.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct imx_devfreq {
+	struct devfreq_dev_profile profile;
+	struct devfreq *devfreq;
+	struct clk *clk;
+	struct devfreq_passive_data passive_data;
+};
+
+static int imx_devfreq_target(struct device *dev, unsigned long *freq, u32 flags)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+	struct dev_pm_opp *new_opp;
+	unsigned long new_freq;
+	int ret;
+
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		ret = PTR_ERR(new_opp);
+		dev_err(dev, "failed to get recommended opp: %d\n", ret);
+		return ret;
+	}
+	new_freq = dev_pm_opp_get_freq(new_opp);
+	dev_pm_opp_put(new_opp);
+
+	return clk_set_rate(priv->clk, new_freq);
+}
+
+static int imx_devfreq_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+
+	*freq = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static int imx_devfreq_get_dev_status(struct device *dev,
+		struct devfreq_dev_status *stat)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+
+	stat->busy_time = 0;
+	stat->total_time = 0;
+	stat->current_frequency = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static void imx_devfreq_exit(struct device *dev)
+{
+	dev_pm_opp_of_remove_table(dev);
+}
+
+static int imx_devfreq_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx_devfreq *priv;
+	const char *gov = DEVFREQ_GOV_USERSPACE;
+	void *govdata = NULL;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		dev_err(dev, "failed to fetch clk: %d\n", ret);
+		return ret;
+	}
+	platform_set_drvdata(pdev, priv);
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get OPP table\n");
+		return ret;
+	}
+
+	priv->profile.polling_ms = 1000;
+	priv->profile.target = imx_devfreq_target;
+	priv->profile.get_dev_status = imx_devfreq_get_dev_status;
+	priv->profile.exit = imx_devfreq_exit;
+	priv->profile.get_cur_freq = imx_devfreq_get_cur_freq;
+	priv->profile.initial_freq = clk_get_rate(priv->clk);
+
+	/* Handle passive devfreq parent link */
+	priv->passive_data.parent = devfreq_get_devfreq_by_phandle(dev, 0);
+	if (!IS_ERR(priv->passive_data.parent)) {
+		dev_info(dev, "passive link to %s\n",
+				dev_name(priv->passive_data.parent->dev.parent));
+		gov = DEVFREQ_GOV_PASSIVE;
+		govdata = &priv->passive_data;
+	} else if (priv->passive_data.parent != ERR_PTR(-ENODEV)) {
+		// -ENODEV means no parent: not an error.
+		ret = PTR_ERR(priv->passive_data.parent);
+		if (ret != -EPROBE_DEFER)
+			dev_warn(dev, "failed to get passive parent: %d\n", ret);
+		goto err;
+	}
+
+	priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
+						gov, govdata);
+	if (IS_ERR(priv->devfreq)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to add devfreq device: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	dev_pm_opp_of_remove_table(dev);
+	return ret;
+}
+
+static const struct of_device_id imx_devfreq_of_match[] = {
+	{ .compatible = "fsl,imx8m-noc", },
+	{ .compatible = "fsl,imx8m-nic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx_devfreq_of_match);
+
+static struct platform_driver imx_devfreq_platdrv = {
+	.probe		= imx_devfreq_probe,
+	.driver = {
+		.name	= "imx-devfreq",
+		.of_match_table = of_match_ptr(imx_devfreq_of_match),
+	},
+};
+module_platform_driver(imx_devfreq_platdrv);
+
+MODULE_DESCRIPTION("Generic i.MX bus frequency driver");
+MODULE_AUTHOR("Leonard Crestez <leonard.crestez@nxp.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Stephen Boyd <sboyd@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: "Kyungmin Park" <kyungmin.park@samsung.com>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Artur Świgoń" <a.swigon@partner.samsung.com>,
	"Saravana Kannan" <saravanak@google.com>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	"Alexandre Bailon" <abailon@baylibre.com>,
	"Georgi Djakov" <georgi.djakov@linaro.org>,
	"Dong Aisheng" <aisheng.dong@nxp.com>,
	"Abel Vesa" <abel.vesa@nxp.com>, "Jacky Bai" <ping.bai@nxp.com>,
	"Anson Huang" <Anson.Huang@nxp.com>,
	"Fabio Estevam" <fabio.estevam@nxp.com>,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-imx@nxp.com,
	kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/7] PM / devfreq: Add generic imx bus driver
Date: Tue, 20 Aug 2019 18:45:08 +0300	[thread overview]
Message-ID: <8726e078e0c0661eead993f26c1bd8546b63e6ab.1566315740.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1566315740.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1566315740.git.leonard.crestez@nxp.com>

Add initial support for dynamic frequency switching on pieces of the imx
interconnect fabric.

All this driver actually does is set a clk rate based on an opp table.

No attempt is made to map registers or anything clever.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/devfreq/Kconfig       |  12 +++
 drivers/devfreq/Makefile      |   1 +
 drivers/devfreq/imx-devfreq.c | 148 ++++++++++++++++++++++++++++++++++
 3 files changed, 161 insertions(+)
 create mode 100644 drivers/devfreq/imx-devfreq.c

diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index defe1d438710..9088a151bafe 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -90,10 +90,22 @@ config ARM_EXYNOS_BUS_DEVFREQ
 	  Each memory bus group could contain many memoby bus block. It reads
 	  PPMU counters of memory controllers by using DEVFREQ-event device
 	  and adjusts the operating frequencies and voltages with OPP support.
 	  This does not yet operate with optimal voltages.
 
+config ARM_IMX_DEVFREQ
+	tristate "i.MX DEVFREQ Driver"
+	depends on ARCH_MXC || COMPILE_TEST
+	select DEVFREQ_GOV_PASSIVE
+	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	select DEVFREQ_GOV_USERSPACE
+	select PM_OPP
+	help
+	  This adds the DEVFREQ driver for the i.MX family of SoCs.
+	  It allows adjusting frequencies for DDRC (DDR Controller) and various
+	  NICs and NOCs which form the SOC interconnect fabric
+
 config ARM_TEGRA_DEVFREQ
 	tristate "NVIDIA Tegra30/114/124/210 DEVFREQ Driver"
 	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_114_SOC || \
 		ARCH_TEGRA_132_SOC || ARCH_TEGRA_124_SOC || \
 		ARCH_TEGRA_210_SOC || \
diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index 338ae8440db6..c2463ed4c934 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -7,10 +7,11 @@ obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE)	+= governor_powersave.o
 obj-$(CONFIG_DEVFREQ_GOV_USERSPACE)	+= governor_userspace.o
 obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+= governor_passive.o
 
 # DEVFREQ Drivers
 obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
+obj-$(CONFIG_ARM_IMX_DEVFREQ)		+= imx-devfreq.o
 obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
 obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
 obj-$(CONFIG_ARM_TEGRA20_DEVFREQ)	+= tegra20-devfreq.o
 
 # DEVFREQ Event Drivers
diff --git a/drivers/devfreq/imx-devfreq.c b/drivers/devfreq/imx-devfreq.c
new file mode 100644
index 000000000000..5c907b3ab9c0
--- /dev/null
+++ b/drivers/devfreq/imx-devfreq.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct imx_devfreq {
+	struct devfreq_dev_profile profile;
+	struct devfreq *devfreq;
+	struct clk *clk;
+	struct devfreq_passive_data passive_data;
+};
+
+static int imx_devfreq_target(struct device *dev, unsigned long *freq, u32 flags)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+	struct dev_pm_opp *new_opp;
+	unsigned long new_freq;
+	int ret;
+
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		ret = PTR_ERR(new_opp);
+		dev_err(dev, "failed to get recommended opp: %d\n", ret);
+		return ret;
+	}
+	new_freq = dev_pm_opp_get_freq(new_opp);
+	dev_pm_opp_put(new_opp);
+
+	return clk_set_rate(priv->clk, new_freq);
+}
+
+static int imx_devfreq_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+
+	*freq = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static int imx_devfreq_get_dev_status(struct device *dev,
+		struct devfreq_dev_status *stat)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+
+	stat->busy_time = 0;
+	stat->total_time = 0;
+	stat->current_frequency = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static void imx_devfreq_exit(struct device *dev)
+{
+	dev_pm_opp_of_remove_table(dev);
+}
+
+static int imx_devfreq_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx_devfreq *priv;
+	const char *gov = DEVFREQ_GOV_USERSPACE;
+	void *govdata = NULL;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		dev_err(dev, "failed to fetch clk: %d\n", ret);
+		return ret;
+	}
+	platform_set_drvdata(pdev, priv);
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get OPP table\n");
+		return ret;
+	}
+
+	priv->profile.polling_ms = 1000;
+	priv->profile.target = imx_devfreq_target;
+	priv->profile.get_dev_status = imx_devfreq_get_dev_status;
+	priv->profile.exit = imx_devfreq_exit;
+	priv->profile.get_cur_freq = imx_devfreq_get_cur_freq;
+	priv->profile.initial_freq = clk_get_rate(priv->clk);
+
+	/* Handle passive devfreq parent link */
+	priv->passive_data.parent = devfreq_get_devfreq_by_phandle(dev, 0);
+	if (!IS_ERR(priv->passive_data.parent)) {
+		dev_info(dev, "passive link to %s\n",
+				dev_name(priv->passive_data.parent->dev.parent));
+		gov = DEVFREQ_GOV_PASSIVE;
+		govdata = &priv->passive_data;
+	} else if (priv->passive_data.parent != ERR_PTR(-ENODEV)) {
+		// -ENODEV means no parent: not an error.
+		ret = PTR_ERR(priv->passive_data.parent);
+		if (ret != -EPROBE_DEFER)
+			dev_warn(dev, "failed to get passive parent: %d\n", ret);
+		goto err;
+	}
+
+	priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
+						gov, govdata);
+	if (IS_ERR(priv->devfreq)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to add devfreq device: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	dev_pm_opp_of_remove_table(dev);
+	return ret;
+}
+
+static const struct of_device_id imx_devfreq_of_match[] = {
+	{ .compatible = "fsl,imx8m-noc", },
+	{ .compatible = "fsl,imx8m-nic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx_devfreq_of_match);
+
+static struct platform_driver imx_devfreq_platdrv = {
+	.probe		= imx_devfreq_probe,
+	.driver = {
+		.name	= "imx-devfreq",
+		.of_match_table = of_match_ptr(imx_devfreq_of_match),
+	},
+};
+module_platform_driver(imx_devfreq_platdrv);
+
+MODULE_DESCRIPTION("Generic i.MX bus frequency driver");
+MODULE_AUTHOR("Leonard Crestez <leonard.crestez@nxp.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Stephen Boyd <sboyd@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
	"Artur Świgoń" <a.swigon@partner.samsung.com>,
	"Abel Vesa" <abel.vesa@nxp.com>,
	"Saravana Kannan" <saravanak@google.com>,
	"Anson Huang" <Anson.Huang@nxp.com>,
	linux-arm-kernel@lists.infradead.org,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	linux-pm@vger.kernel.org, linux-imx@nxp.com,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	linux-clk@vger.kernel.org,
	"Kyungmin Park" <kyungmin.park@samsung.com>,
	"Alexandre Bailon" <abailon@baylibre.com>,
	kernel@pengutronix.de, "Dong Aisheng" <aisheng.dong@nxp.com>,
	"Fabio Estevam" <fabio.estevam@nxp.com>,
	"Georgi Djakov" <georgi.djakov@linaro.org>,
	devicetree@vger.kernel.org, "Jacky Bai" <ping.bai@nxp.com>
Subject: [PATCH v2 3/7] PM / devfreq: Add generic imx bus driver
Date: Tue, 20 Aug 2019 18:45:08 +0300	[thread overview]
Message-ID: <8726e078e0c0661eead993f26c1bd8546b63e6ab.1566315740.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1566315740.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1566315740.git.leonard.crestez@nxp.com>

Add initial support for dynamic frequency switching on pieces of the imx
interconnect fabric.

All this driver actually does is set a clk rate based on an opp table.

No attempt is made to map registers or anything clever.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/devfreq/Kconfig       |  12 +++
 drivers/devfreq/Makefile      |   1 +
 drivers/devfreq/imx-devfreq.c | 148 ++++++++++++++++++++++++++++++++++
 3 files changed, 161 insertions(+)
 create mode 100644 drivers/devfreq/imx-devfreq.c

diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index defe1d438710..9088a151bafe 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -90,10 +90,22 @@ config ARM_EXYNOS_BUS_DEVFREQ
 	  Each memory bus group could contain many memoby bus block. It reads
 	  PPMU counters of memory controllers by using DEVFREQ-event device
 	  and adjusts the operating frequencies and voltages with OPP support.
 	  This does not yet operate with optimal voltages.
 
+config ARM_IMX_DEVFREQ
+	tristate "i.MX DEVFREQ Driver"
+	depends on ARCH_MXC || COMPILE_TEST
+	select DEVFREQ_GOV_PASSIVE
+	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	select DEVFREQ_GOV_USERSPACE
+	select PM_OPP
+	help
+	  This adds the DEVFREQ driver for the i.MX family of SoCs.
+	  It allows adjusting frequencies for DDRC (DDR Controller) and various
+	  NICs and NOCs which form the SOC interconnect fabric
+
 config ARM_TEGRA_DEVFREQ
 	tristate "NVIDIA Tegra30/114/124/210 DEVFREQ Driver"
 	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_114_SOC || \
 		ARCH_TEGRA_132_SOC || ARCH_TEGRA_124_SOC || \
 		ARCH_TEGRA_210_SOC || \
diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index 338ae8440db6..c2463ed4c934 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -7,10 +7,11 @@ obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE)	+= governor_powersave.o
 obj-$(CONFIG_DEVFREQ_GOV_USERSPACE)	+= governor_userspace.o
 obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+= governor_passive.o
 
 # DEVFREQ Drivers
 obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
+obj-$(CONFIG_ARM_IMX_DEVFREQ)		+= imx-devfreq.o
 obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
 obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
 obj-$(CONFIG_ARM_TEGRA20_DEVFREQ)	+= tegra20-devfreq.o
 
 # DEVFREQ Event Drivers
diff --git a/drivers/devfreq/imx-devfreq.c b/drivers/devfreq/imx-devfreq.c
new file mode 100644
index 000000000000..5c907b3ab9c0
--- /dev/null
+++ b/drivers/devfreq/imx-devfreq.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct imx_devfreq {
+	struct devfreq_dev_profile profile;
+	struct devfreq *devfreq;
+	struct clk *clk;
+	struct devfreq_passive_data passive_data;
+};
+
+static int imx_devfreq_target(struct device *dev, unsigned long *freq, u32 flags)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+	struct dev_pm_opp *new_opp;
+	unsigned long new_freq;
+	int ret;
+
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		ret = PTR_ERR(new_opp);
+		dev_err(dev, "failed to get recommended opp: %d\n", ret);
+		return ret;
+	}
+	new_freq = dev_pm_opp_get_freq(new_opp);
+	dev_pm_opp_put(new_opp);
+
+	return clk_set_rate(priv->clk, new_freq);
+}
+
+static int imx_devfreq_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+
+	*freq = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static int imx_devfreq_get_dev_status(struct device *dev,
+		struct devfreq_dev_status *stat)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+
+	stat->busy_time = 0;
+	stat->total_time = 0;
+	stat->current_frequency = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static void imx_devfreq_exit(struct device *dev)
+{
+	dev_pm_opp_of_remove_table(dev);
+}
+
+static int imx_devfreq_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx_devfreq *priv;
+	const char *gov = DEVFREQ_GOV_USERSPACE;
+	void *govdata = NULL;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		dev_err(dev, "failed to fetch clk: %d\n", ret);
+		return ret;
+	}
+	platform_set_drvdata(pdev, priv);
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get OPP table\n");
+		return ret;
+	}
+
+	priv->profile.polling_ms = 1000;
+	priv->profile.target = imx_devfreq_target;
+	priv->profile.get_dev_status = imx_devfreq_get_dev_status;
+	priv->profile.exit = imx_devfreq_exit;
+	priv->profile.get_cur_freq = imx_devfreq_get_cur_freq;
+	priv->profile.initial_freq = clk_get_rate(priv->clk);
+
+	/* Handle passive devfreq parent link */
+	priv->passive_data.parent = devfreq_get_devfreq_by_phandle(dev, 0);
+	if (!IS_ERR(priv->passive_data.parent)) {
+		dev_info(dev, "passive link to %s\n",
+				dev_name(priv->passive_data.parent->dev.parent));
+		gov = DEVFREQ_GOV_PASSIVE;
+		govdata = &priv->passive_data;
+	} else if (priv->passive_data.parent != ERR_PTR(-ENODEV)) {
+		// -ENODEV means no parent: not an error.
+		ret = PTR_ERR(priv->passive_data.parent);
+		if (ret != -EPROBE_DEFER)
+			dev_warn(dev, "failed to get passive parent: %d\n", ret);
+		goto err;
+	}
+
+	priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
+						gov, govdata);
+	if (IS_ERR(priv->devfreq)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to add devfreq device: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	dev_pm_opp_of_remove_table(dev);
+	return ret;
+}
+
+static const struct of_device_id imx_devfreq_of_match[] = {
+	{ .compatible = "fsl,imx8m-noc", },
+	{ .compatible = "fsl,imx8m-nic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx_devfreq_of_match);
+
+static struct platform_driver imx_devfreq_platdrv = {
+	.probe		= imx_devfreq_probe,
+	.driver = {
+		.name	= "imx-devfreq",
+		.of_match_table = of_match_ptr(imx_devfreq_of_match),
+	},
+};
+module_platform_driver(imx_devfreq_platdrv);
+
+MODULE_DESCRIPTION("Generic i.MX bus frequency driver");
+MODULE_AUTHOR("Leonard Crestez <leonard.crestez@nxp.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-08-20 15:45 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-20 15:45 [PATCH v2 0/7] PM / devfreq: Add initial imx support Leonard Crestez
2019-08-20 15:45 ` Leonard Crestez
2019-08-20 15:45 ` Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 1/7] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram_alt/apb Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-09-16 20:33   ` Stephen Boyd
2019-09-16 23:03     ` Leonard Crestez
2019-09-16 23:03       ` Leonard Crestez
2019-09-16 23:03       ` Leonard Crestez
2019-09-17 16:32       ` Stephen Boyd
2019-09-17 16:59         ` Leonard Crestez
2019-09-17 16:59           ` Leonard Crestez
2019-09-17 16:59           ` Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 2/7] dt-bindings: devfreq: Add bindings for generic imx buses Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-08-20 15:45 ` Leonard Crestez [this message]
2019-08-20 15:45   ` [PATCH v2 3/7] PM / devfreq: Add generic imx bus driver Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 4/7] dt-bindings: devfreq: Add bindings for imx ddr controller Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 5/7] PM / devfreq: Add dynamic scaling " Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 6/7] PM / devfreq: imx-ddrc: Measure bandwidth with perf Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 7/7] arm64: dts: imx8mm: Add devfreq nodes Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez
2019-08-20 15:45   ` Leonard Crestez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8726e078e0c0661eead993f26c1bd8546b63e6ab.1566315740.git.leonard.crestez@nxp.com \
    --to=leonard.crestez@nxp.com \
    --cc=Anson.Huang@nxp.com \
    --cc=a.swigon@partner.samsung.com \
    --cc=abailon@baylibre.com \
    --cc=abel.vesa@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=georgi.djakov@linaro.org \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=ping.bai@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=saravanak@google.com \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.