From: Jani Nikula <jani.nikula@intel.com>
To: "james qian wang \(Arm Technology China\)" <james.qian.wang@arm.com>
Cc: "intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>, nd <nd@arm.com>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>
Subject: Re: [6/8] drm/atomic: convert to drm device based logging
Date: Thu, 12 Dec 2019 10:33:31 +0200 [thread overview]
Message-ID: <87zhfy0wpw.fsf@intel.com> (raw)
In-Reply-To: <20191212080707.GA14875@jamwan02-TSP300>
On Thu, 12 Dec 2019, "james qian wang (Arm Technology China)" <james.qian.wang@arm.com> wrote:
> On Tue, Dec 10, 2019 at 02:30:48PM +0200, Jani Nikula wrote:
>> Prefer drm_dbg_atomic().
>>
>> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
>> ---
>> drivers/gpu/drm/drm_agpsupport.c | 4 +-
>> drivers/gpu/drm/drm_atomic.c | 187 +++++++++++++++++--------------
>> 2 files changed, 102 insertions(+), 89 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_agpsupport.c b/drivers/gpu/drm/drm_agpsupport.c
>> index 4c7ad46fdd21..cd675e58de50 100644
>> --- a/drivers/gpu/drm/drm_agpsupport.c
>> +++ b/drivers/gpu/drm/drm_agpsupport.c
>> @@ -330,8 +330,8 @@ int drm_agp_bind(struct drm_device *dev, struct drm_agp_binding *request)
>> if (retcode)
>> return retcode;
>> entry->bound = dev->agp->base + (page << PAGE_SHIFT);
>> - DRM_DEBUG("base = 0x%lx entry->bound = 0x%lx\n",
>> - dev->agp->base, entry->bound);
>> + drm_dbg_core(dev, "base = 0x%lx entry->bound = 0x%lx\n",
>> + dev->agp->base, entry->bound);
>> return 0;
>> }
>> EXPORT_SYMBOL(drm_agp_bind);
>> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
>> index 14aeaf736321..8494b1c29bf0 100644
>> --- a/drivers/gpu/drm/drm_atomic.c
>> +++ b/drivers/gpu/drm/drm_atomic.c
>> @@ -99,7 +99,7 @@ drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state)
>>
>> state->dev = dev;
>>
>> - DRM_DEBUG_ATOMIC("Allocated atomic state %p\n", state);
>> + drm_dbg_atomic(dev, "Allocated atomic state %p\n", state);
>>
>> return 0;
>> fail:
>> @@ -150,7 +150,7 @@ void drm_atomic_state_default_clear(struct drm_atomic_state *state)
>> struct drm_mode_config *config = &dev->mode_config;
>> int i;
>>
>> - DRM_DEBUG_ATOMIC("Clearing atomic state %p\n", state);
>> + drm_dbg_atomic(dev, "Clearing atomic state %p\n", state);
>>
>> for (i = 0; i < state->num_connector; i++) {
>> struct drm_connector *connector = state->connectors[i].ptr;
>> @@ -256,11 +256,12 @@ EXPORT_SYMBOL(drm_atomic_state_clear);
>> void __drm_atomic_state_free(struct kref *ref)
>> {
>> struct drm_atomic_state *state = container_of(ref, typeof(*state), ref);
>> - struct drm_mode_config *config = &state->dev->mode_config;
>> + struct drm_device *dev = state->dev;
>> + struct drm_mode_config *config = &dev->mode_config;
>>
>> drm_atomic_state_clear(state);
>>
>> - DRM_DEBUG_ATOMIC("Freeing atomic state %p\n", state);
>> + drm_dbg_atomic(dev, "Freeing atomic state %p\n", state);
>>
>> if (config->funcs->atomic_state_free) {
>> config->funcs->atomic_state_free(state);
>> @@ -290,8 +291,9 @@ struct drm_crtc_state *
>> drm_atomic_get_crtc_state(struct drm_atomic_state *state,
>> struct drm_crtc *crtc)
>> {
>> - int ret, index = drm_crtc_index(crtc);
>> + struct drm_device *dev = state->dev;
>> struct drm_crtc_state *crtc_state;
>> + int ret, index = drm_crtc_index(crtc);
>>
>> WARN_ON(!state->acquire_ctx);
>>
>> @@ -313,8 +315,8 @@ drm_atomic_get_crtc_state(struct drm_atomic_state *state,
>> state->crtcs[index].ptr = crtc;
>> crtc_state->state = state;
>>
>> - DRM_DEBUG_ATOMIC("Added [CRTC:%d:%s] %p state to %p\n",
>> - crtc->base.id, crtc->name, crtc_state, state);
>> + drm_dbg_atomic(dev, "Added [CRTC:%d:%s] %p state to %p\n",
>> + crtc->base.id, crtc->name, crtc_state, state);
>>
>> return crtc_state;
>> }
>> @@ -324,6 +326,7 @@ static int drm_atomic_crtc_check(const struct drm_crtc_state *old_crtc_state,
>> const struct drm_crtc_state *new_crtc_state)
>> {
>> struct drm_crtc *crtc = new_crtc_state->crtc;
>> + struct drm_device *dev = crtc->dev;
>>
>> /* NOTE: we explicitly don't enforce constraints such as primary
>> * layer covering entire screen, since that is something we want
>> @@ -334,25 +337,25 @@ static int drm_atomic_crtc_check(const struct drm_crtc_state *old_crtc_state,
>> */
>>
>> if (new_crtc_state->active && !new_crtc_state->enable) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] active without enabled\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] active without enabled\n",
>> + crtc->base.id, crtc->name);
>
> Can we add a new dedicated print level for these atomic check error msg,
> In practice we more care about the atomic check errors, it is annoy to
> pick it out from (so many) DRM_DEBUG_ATOMIC() msgs.
Please let's try to converge on the patches at hand instead of diverging
to things that are unrelated to what this patch series tries to achieve.
BR,
Jani.
>
> Thanks
> James
>
>> return -EINVAL;
>> }
>>
>> /* The state->enable vs. state->mode_blob checks can be WARN_ON,
>> * as this is a kernel-internal detail that userspace should never
>> * be able to trigger. */
>> - if (drm_core_check_feature(crtc->dev, DRIVER_ATOMIC) &&
>> + if (drm_core_check_feature(dev, DRIVER_ATOMIC) &&
>> WARN_ON(new_crtc_state->enable && !new_crtc_state->mode_blob)) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] enabled without mode blob\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] enabled without mode blob\n",
>> + crtc->base.id, crtc->name);
>> return -EINVAL;
>> }
>>
>> - if (drm_core_check_feature(crtc->dev, DRIVER_ATOMIC) &&
>> + if (drm_core_check_feature(dev, DRIVER_ATOMIC) &&
>> WARN_ON(!new_crtc_state->enable && new_crtc_state->mode_blob)) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] disabled with mode blob\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] disabled with mode blob\n",
>> + crtc->base.id, crtc->name);
>> return -EINVAL;
>> }
>>
>> @@ -368,8 +371,8 @@ static int drm_atomic_crtc_check(const struct drm_crtc_state *old_crtc_state,
>> */
>> if (new_crtc_state->event &&
>> !new_crtc_state->active && !old_crtc_state->active) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] requesting event but off\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] requesting event but off\n",
>> + crtc->base.id, crtc->name);
>> return -EINVAL;
>> }
>>
>> @@ -402,6 +405,7 @@ static void drm_atomic_crtc_print_state(struct drm_printer *p,
>> static int drm_atomic_connector_check(struct drm_connector *connector,
>> struct drm_connector_state *state)
>> {
>> + struct drm_device *dev = connector->dev;
>> struct drm_crtc_state *crtc_state;
>> struct drm_writeback_job *writeback_job = state->writeback_job;
>> const struct drm_display_info *info = &connector->display_info;
>> @@ -414,8 +418,8 @@ static int drm_atomic_connector_check(struct drm_connector *connector,
>> return 0;
>>
>> if (writeback_job->fb && !state->crtc) {
>> - DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] framebuffer without CRTC\n",
>> - connector->base.id, connector->name);
>> + drm_dbg_atomic(dev, "[CONNECTOR:%d:%s] framebuffer without CRTC\n",
>> + connector->base.id, connector->name);
>> return -EINVAL;
>> }
>>
>> @@ -424,16 +428,16 @@ static int drm_atomic_connector_check(struct drm_connector *connector,
>> state->crtc);
>>
>> if (writeback_job->fb && !crtc_state->active) {
>> - DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] has framebuffer, but [CRTC:%d] is off\n",
>> - connector->base.id, connector->name,
>> - state->crtc->base.id);
>> + drm_dbg_atomic(dev, "[CONNECTOR:%d:%s] has framebuffer, but [CRTC:%d] is off\n",
>> + connector->base.id, connector->name,
>> + state->crtc->base.id);
>> return -EINVAL;
>> }
>>
>> if (!writeback_job->fb) {
>> if (writeback_job->out_fence) {
>> - DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] requesting out-fence without framebuffer\n",
>> - connector->base.id, connector->name);
>> + drm_dbg_atomic(dev, "[CONNECTOR:%d:%s] requesting out-fence without framebuffer\n",
>> + connector->base.id, connector->name);
>> return -EINVAL;
>> }
>>
>> @@ -463,8 +467,9 @@ struct drm_plane_state *
>> drm_atomic_get_plane_state(struct drm_atomic_state *state,
>> struct drm_plane *plane)
>> {
>> - int ret, index = drm_plane_index(plane);
>> + struct drm_device *dev = state->dev;
>> struct drm_plane_state *plane_state;
>> + int ret, index = drm_plane_index(plane);
>>
>> WARN_ON(!state->acquire_ctx);
>>
>> @@ -491,8 +496,8 @@ drm_atomic_get_plane_state(struct drm_atomic_state *state,
>> state->planes[index].new_state = plane_state;
>> plane_state->state = state;
>>
>> - DRM_DEBUG_ATOMIC("Added [PLANE:%d:%s] %p state to %p\n",
>> - plane->base.id, plane->name, plane_state, state);
>> + drm_dbg_atomic(dev, "Added [PLANE:%d:%s] %p state to %p\n",
>> + plane->base.id, plane->name, plane_state, state);
>>
>> if (plane_state->crtc) {
>> struct drm_crtc_state *crtc_state;
>> @@ -539,6 +544,7 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> const struct drm_plane_state *new_plane_state)
>> {
>> struct drm_plane *plane = new_plane_state->plane;
>> + struct drm_device *dev = plane->dev;
>> struct drm_crtc *crtc = new_plane_state->crtc;
>> const struct drm_framebuffer *fb = new_plane_state->fb;
>> unsigned int fb_width, fb_height;
>> @@ -548,12 +554,12 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>>
>> /* either *both* CRTC and FB must be set, or neither */
>> if (crtc && !fb) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] CRTC set but no FB\n",
>> - plane->base.id, plane->name);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] CRTC set but no FB\n",
>> + plane->base.id, plane->name);
>> return -EINVAL;
>> } else if (fb && !crtc) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] FB set but no CRTC\n",
>> - plane->base.id, plane->name);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] FB set but no CRTC\n",
>> + plane->base.id, plane->name);
>> return -EINVAL;
>> }
>>
>> @@ -563,9 +569,9 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>>
>> /* Check whether this plane is usable on this CRTC */
>> if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
>> - DRM_DEBUG_ATOMIC("Invalid [CRTC:%d:%s] for [PLANE:%d:%s]\n",
>> - crtc->base.id, crtc->name,
>> - plane->base.id, plane->name);
>> + drm_dbg_atomic(dev, "Invalid [CRTC:%d:%s] for [PLANE:%d:%s]\n",
>> + crtc->base.id, crtc->name,
>> + plane->base.id, plane->name);
>> return -EINVAL;
>> }
>>
>> @@ -574,11 +580,11 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> fb->modifier);
>> if (ret) {
>> struct drm_format_name_buf format_name;
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] invalid pixel format %s, modifier 0x%llx\n",
>> - plane->base.id, plane->name,
>> - drm_get_format_name(fb->format->format,
>> - &format_name),
>> - fb->modifier);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] invalid pixel format %s, modifier 0x%llx\n",
>> + plane->base.id, plane->name,
>> + drm_get_format_name(fb->format->format,
>> + &format_name),
>> + fb->modifier);
>> return ret;
>> }
>>
>> @@ -587,10 +593,10 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> new_plane_state->crtc_x > INT_MAX - (int32_t) new_plane_state->crtc_w ||
>> new_plane_state->crtc_h > INT_MAX ||
>> new_plane_state->crtc_y > INT_MAX - (int32_t) new_plane_state->crtc_h) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] invalid CRTC coordinates %ux%u+%d+%d\n",
>> - plane->base.id, plane->name,
>> - new_plane_state->crtc_w, new_plane_state->crtc_h,
>> - new_plane_state->crtc_x, new_plane_state->crtc_y);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] invalid CRTC coordinates %ux%u+%d+%d\n",
>> + plane->base.id, plane->name,
>> + new_plane_state->crtc_w, new_plane_state->crtc_h,
>> + new_plane_state->crtc_x, new_plane_state->crtc_y);
>> return -ERANGE;
>> }
>>
>> @@ -602,18 +608,18 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> new_plane_state->src_x > fb_width - new_plane_state->src_w ||
>> new_plane_state->src_h > fb_height ||
>> new_plane_state->src_y > fb_height - new_plane_state->src_h) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] invalid source coordinates "
>> - "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
>> - plane->base.id, plane->name,
>> - new_plane_state->src_w >> 16,
>> - ((new_plane_state->src_w & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_h >> 16,
>> - ((new_plane_state->src_h & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_x >> 16,
>> - ((new_plane_state->src_x & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_y >> 16,
>> - ((new_plane_state->src_y & 0xffff) * 15625) >> 10,
>> - fb->width, fb->height);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] invalid source coordinates "
>> + "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
>> + plane->base.id, plane->name,
>> + new_plane_state->src_w >> 16,
>> + ((new_plane_state->src_w & 0xffff) * 15625) >> 10,
>> + new_plane_state->src_h >> 16,
>> + ((new_plane_state->src_h & 0xffff) * 15625) >> 10,
>> + new_plane_state->src_x >> 16,
>> + ((new_plane_state->src_x & 0xffff) * 15625) >> 10,
>> + new_plane_state->src_y >> 16,
>> + ((new_plane_state->src_y & 0xffff) * 15625) >> 10,
>> + fb->width, fb->height);
>> return -ENOSPC;
>> }
>>
>> @@ -628,9 +634,9 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> clips->y1 < 0 ||
>> clips->x2 > fb_width ||
>> clips->y2 > fb_height) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] invalid damage clip %d %d %d %d\n",
>> - plane->base.id, plane->name, clips->x1,
>> - clips->y1, clips->x2, clips->y2);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] invalid damage clip %d %d %d %d\n",
>> + plane->base.id, plane->name, clips->x1,
>> + clips->y1, clips->x2, clips->y2);
>> return -EINVAL;
>> }
>> clips++;
>> @@ -638,8 +644,8 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> }
>>
>> if (plane_switching_crtc(old_plane_state, new_plane_state)) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] switching CRTC directly\n",
>> - plane->base.id, plane->name);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] switching CRTC directly\n",
>> + plane->base.id, plane->name);
>> return -EINVAL;
>> }
>>
>> @@ -766,6 +772,7 @@ struct drm_private_state *
>> drm_atomic_get_private_obj_state(struct drm_atomic_state *state,
>> struct drm_private_obj *obj)
>> {
>> + struct drm_device *dev = state->dev;
>> int index, num_objs, i, ret;
>> size_t size;
>> struct __drm_private_objs_state *arr;
>> @@ -801,8 +808,8 @@ drm_atomic_get_private_obj_state(struct drm_atomic_state *state,
>>
>> state->num_private_objs = num_objs;
>>
>> - DRM_DEBUG_ATOMIC("Added new private object %p state %p to %p\n",
>> - obj, obj_state, state);
>> + drm_dbg_atomic(dev, "Added new private object %p state %p to %p\n",
>> + obj, obj_state, state);
>>
>> return obj_state;
>> }
>> @@ -940,6 +947,7 @@ struct drm_connector_state *
>> drm_atomic_get_connector_state(struct drm_atomic_state *state,
>> struct drm_connector *connector)
>> {
>> + struct drm_device *dev = state->dev;
>> int ret, index;
>> struct drm_mode_config *config = &connector->dev->mode_config;
>> struct drm_connector_state *connector_state;
>> @@ -981,9 +989,9 @@ drm_atomic_get_connector_state(struct drm_atomic_state *state,
>> state->connectors[index].ptr = connector;
>> connector_state->state = state;
>>
>> - DRM_DEBUG_ATOMIC("Added [CONNECTOR:%d:%s] %p state to %p\n",
>> - connector->base.id, connector->name,
>> - connector_state, state);
>> + drm_dbg_atomic(dev, "Added [CONNECTOR:%d:%s] %p state to %p\n",
>> + connector->base.id, connector->name,
>> + connector_state, state);
>>
>> if (connector_state->crtc) {
>> struct drm_crtc_state *crtc_state;
>> @@ -1036,7 +1044,8 @@ int
>> drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
>> struct drm_crtc *crtc)
>> {
>> - struct drm_mode_config *config = &state->dev->mode_config;
>> + struct drm_device *dev = state->dev;
>> + struct drm_mode_config *config = &dev->mode_config;
>> struct drm_connector *connector;
>> struct drm_connector_state *conn_state;
>> struct drm_connector_list_iter conn_iter;
>> @@ -1051,8 +1060,8 @@ drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
>> if (ret)
>> return ret;
>>
>> - DRM_DEBUG_ATOMIC("Adding all current connectors for [CRTC:%d:%s] to %p\n",
>> - crtc->base.id, crtc->name, state);
>> + drm_dbg_atomic(dev, "Adding all current connectors for [CRTC:%d:%s] to %p\n",
>> + crtc->base.id, crtc->name, state);
>>
>> /*
>> * Changed connectors are already in @state, so only need to look
>> @@ -1099,14 +1108,15 @@ int
>> drm_atomic_add_affected_planes(struct drm_atomic_state *state,
>> struct drm_crtc *crtc)
>> {
>> + struct drm_device *dev = state->dev;
>> const struct drm_crtc_state *old_crtc_state =
>> drm_atomic_get_old_crtc_state(state, crtc);
>> struct drm_plane *plane;
>>
>> WARN_ON(!drm_atomic_get_new_crtc_state(state, crtc));
>>
>> - DRM_DEBUG_ATOMIC("Adding all current planes for [CRTC:%d:%s] to %p\n",
>> - crtc->base.id, crtc->name, state);
>> + drm_dbg_atomic(dev, "Adding all current planes for [CRTC:%d:%s] to %p\n",
>> + crtc->base.id, crtc->name, state);
>>
>> drm_for_each_plane_mask(plane, state->dev, old_crtc_state->plane_mask) {
>> struct drm_plane_state *plane_state =
>> @@ -1144,13 +1154,13 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
>> struct drm_connector_state *conn_state;
>> int i, ret = 0;
>>
>> - DRM_DEBUG_ATOMIC("checking %p\n", state);
>> + drm_dbg_atomic(dev, "checking %p\n", state);
>>
>> for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) {
>> ret = drm_atomic_plane_check(old_plane_state, new_plane_state);
>> if (ret) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] atomic core check failed\n",
>> - plane->base.id, plane->name);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] atomic core check failed\n",
>> + plane->base.id, plane->name);
>> return ret;
>> }
>> }
>> @@ -1158,8 +1168,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
>> for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
>> ret = drm_atomic_crtc_check(old_crtc_state, new_crtc_state);
>> if (ret) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] atomic core check failed\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] atomic core check failed\n",
>> + crtc->base.id, crtc->name);
>> return ret;
>> }
>> }
>> @@ -1167,8 +1177,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
>> for_each_new_connector_in_state(state, conn, conn_state, i) {
>> ret = drm_atomic_connector_check(conn, conn_state);
>> if (ret) {
>> - DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] atomic core check failed\n",
>> - conn->base.id, conn->name);
>> + drm_dbg_atomic(dev, "[CONNECTOR:%d:%s] atomic core check failed\n",
>> + conn->base.id, conn->name);
>> return ret;
>> }
>> }
>> @@ -1177,8 +1187,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
>> ret = config->funcs->atomic_check(state->dev, state);
>>
>> if (ret) {
>> - DRM_DEBUG_ATOMIC("atomic driver check for %p failed: %d\n",
>> - state, ret);
>> + drm_dbg_atomic(dev, "atomic driver check for %p failed: %d\n",
>> + state, ret);
>> return ret;
>> }
>> }
>> @@ -1186,8 +1196,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
>> if (!state->allow_modeset) {
>> for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
>> if (drm_atomic_crtc_needs_modeset(new_crtc_state)) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] requires full modeset\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] requires full modeset\n",
>> + crtc->base.id, crtc->name);
>> return -EINVAL;
>> }
>> }
>> @@ -1213,14 +1223,15 @@ EXPORT_SYMBOL(drm_atomic_check_only);
>> */
>> int drm_atomic_commit(struct drm_atomic_state *state)
>> {
>> - struct drm_mode_config *config = &state->dev->mode_config;
>> + struct drm_device *dev = state->dev;
>> + struct drm_mode_config *config = &dev->mode_config;
>> int ret;
>>
>> ret = drm_atomic_check_only(state);
>> if (ret)
>> return ret;
>>
>> - DRM_DEBUG_ATOMIC("committing %p\n", state);
>> + drm_dbg_atomic(dev, "committing %p\n", state);
>>
>> return config->funcs->atomic_commit(state->dev, state, false);
>> }
>> @@ -1242,14 +1253,15 @@ EXPORT_SYMBOL(drm_atomic_commit);
>> */
>> int drm_atomic_nonblocking_commit(struct drm_atomic_state *state)
>> {
>> - struct drm_mode_config *config = &state->dev->mode_config;
>> + struct drm_device *dev = state->dev;
>> + struct drm_mode_config *config = &dev->mode_config;
>> int ret;
>>
>> ret = drm_atomic_check_only(state);
>> if (ret)
>> return ret;
>>
>> - DRM_DEBUG_ATOMIC("committing %p nonblocking\n", state);
>> + drm_dbg_atomic(dev, "committing %p nonblocking\n", state);
>>
>> return config->funcs->atomic_commit(state->dev, state, true);
>> }
>> @@ -1425,7 +1437,8 @@ EXPORT_SYMBOL(__drm_atomic_helper_set_config);
>>
>> void drm_atomic_print_state(const struct drm_atomic_state *state)
>> {
>> - struct drm_printer p = drm_info_printer(state->dev->dev);
>> + struct drm_device *dev = state->dev;
>> + struct drm_printer p = drm_info_printer(dev->dev);
>> struct drm_plane *plane;
>> struct drm_plane_state *plane_state;
>> struct drm_crtc *crtc;
>> @@ -1434,7 +1447,7 @@ void drm_atomic_print_state(const struct drm_atomic_state *state)
>> struct drm_connector_state *connector_state;
>> int i;
>>
>> - DRM_DEBUG_ATOMIC("checking %p\n", state);
>> + drm_dbg_atomic(dev, "checking %p\n", state);
>>
>> for_each_new_plane_in_state(state, plane, plane_state, i)
>> drm_atomic_plane_print_state(&p, plane_state);
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Jani Nikula <jani.nikula@intel.com>
To: "james qian wang \(Arm Technology China\)" <james.qian.wang@arm.com>
Cc: "intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>, nd <nd@arm.com>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>
Subject: Re: [Intel-gfx] [6/8] drm/atomic: convert to drm device based logging
Date: Thu, 12 Dec 2019 10:33:31 +0200 [thread overview]
Message-ID: <87zhfy0wpw.fsf@intel.com> (raw)
In-Reply-To: <20191212080707.GA14875@jamwan02-TSP300>
On Thu, 12 Dec 2019, "james qian wang (Arm Technology China)" <james.qian.wang@arm.com> wrote:
> On Tue, Dec 10, 2019 at 02:30:48PM +0200, Jani Nikula wrote:
>> Prefer drm_dbg_atomic().
>>
>> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
>> ---
>> drivers/gpu/drm/drm_agpsupport.c | 4 +-
>> drivers/gpu/drm/drm_atomic.c | 187 +++++++++++++++++--------------
>> 2 files changed, 102 insertions(+), 89 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_agpsupport.c b/drivers/gpu/drm/drm_agpsupport.c
>> index 4c7ad46fdd21..cd675e58de50 100644
>> --- a/drivers/gpu/drm/drm_agpsupport.c
>> +++ b/drivers/gpu/drm/drm_agpsupport.c
>> @@ -330,8 +330,8 @@ int drm_agp_bind(struct drm_device *dev, struct drm_agp_binding *request)
>> if (retcode)
>> return retcode;
>> entry->bound = dev->agp->base + (page << PAGE_SHIFT);
>> - DRM_DEBUG("base = 0x%lx entry->bound = 0x%lx\n",
>> - dev->agp->base, entry->bound);
>> + drm_dbg_core(dev, "base = 0x%lx entry->bound = 0x%lx\n",
>> + dev->agp->base, entry->bound);
>> return 0;
>> }
>> EXPORT_SYMBOL(drm_agp_bind);
>> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
>> index 14aeaf736321..8494b1c29bf0 100644
>> --- a/drivers/gpu/drm/drm_atomic.c
>> +++ b/drivers/gpu/drm/drm_atomic.c
>> @@ -99,7 +99,7 @@ drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state)
>>
>> state->dev = dev;
>>
>> - DRM_DEBUG_ATOMIC("Allocated atomic state %p\n", state);
>> + drm_dbg_atomic(dev, "Allocated atomic state %p\n", state);
>>
>> return 0;
>> fail:
>> @@ -150,7 +150,7 @@ void drm_atomic_state_default_clear(struct drm_atomic_state *state)
>> struct drm_mode_config *config = &dev->mode_config;
>> int i;
>>
>> - DRM_DEBUG_ATOMIC("Clearing atomic state %p\n", state);
>> + drm_dbg_atomic(dev, "Clearing atomic state %p\n", state);
>>
>> for (i = 0; i < state->num_connector; i++) {
>> struct drm_connector *connector = state->connectors[i].ptr;
>> @@ -256,11 +256,12 @@ EXPORT_SYMBOL(drm_atomic_state_clear);
>> void __drm_atomic_state_free(struct kref *ref)
>> {
>> struct drm_atomic_state *state = container_of(ref, typeof(*state), ref);
>> - struct drm_mode_config *config = &state->dev->mode_config;
>> + struct drm_device *dev = state->dev;
>> + struct drm_mode_config *config = &dev->mode_config;
>>
>> drm_atomic_state_clear(state);
>>
>> - DRM_DEBUG_ATOMIC("Freeing atomic state %p\n", state);
>> + drm_dbg_atomic(dev, "Freeing atomic state %p\n", state);
>>
>> if (config->funcs->atomic_state_free) {
>> config->funcs->atomic_state_free(state);
>> @@ -290,8 +291,9 @@ struct drm_crtc_state *
>> drm_atomic_get_crtc_state(struct drm_atomic_state *state,
>> struct drm_crtc *crtc)
>> {
>> - int ret, index = drm_crtc_index(crtc);
>> + struct drm_device *dev = state->dev;
>> struct drm_crtc_state *crtc_state;
>> + int ret, index = drm_crtc_index(crtc);
>>
>> WARN_ON(!state->acquire_ctx);
>>
>> @@ -313,8 +315,8 @@ drm_atomic_get_crtc_state(struct drm_atomic_state *state,
>> state->crtcs[index].ptr = crtc;
>> crtc_state->state = state;
>>
>> - DRM_DEBUG_ATOMIC("Added [CRTC:%d:%s] %p state to %p\n",
>> - crtc->base.id, crtc->name, crtc_state, state);
>> + drm_dbg_atomic(dev, "Added [CRTC:%d:%s] %p state to %p\n",
>> + crtc->base.id, crtc->name, crtc_state, state);
>>
>> return crtc_state;
>> }
>> @@ -324,6 +326,7 @@ static int drm_atomic_crtc_check(const struct drm_crtc_state *old_crtc_state,
>> const struct drm_crtc_state *new_crtc_state)
>> {
>> struct drm_crtc *crtc = new_crtc_state->crtc;
>> + struct drm_device *dev = crtc->dev;
>>
>> /* NOTE: we explicitly don't enforce constraints such as primary
>> * layer covering entire screen, since that is something we want
>> @@ -334,25 +337,25 @@ static int drm_atomic_crtc_check(const struct drm_crtc_state *old_crtc_state,
>> */
>>
>> if (new_crtc_state->active && !new_crtc_state->enable) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] active without enabled\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] active without enabled\n",
>> + crtc->base.id, crtc->name);
>
> Can we add a new dedicated print level for these atomic check error msg,
> In practice we more care about the atomic check errors, it is annoy to
> pick it out from (so many) DRM_DEBUG_ATOMIC() msgs.
Please let's try to converge on the patches at hand instead of diverging
to things that are unrelated to what this patch series tries to achieve.
BR,
Jani.
>
> Thanks
> James
>
>> return -EINVAL;
>> }
>>
>> /* The state->enable vs. state->mode_blob checks can be WARN_ON,
>> * as this is a kernel-internal detail that userspace should never
>> * be able to trigger. */
>> - if (drm_core_check_feature(crtc->dev, DRIVER_ATOMIC) &&
>> + if (drm_core_check_feature(dev, DRIVER_ATOMIC) &&
>> WARN_ON(new_crtc_state->enable && !new_crtc_state->mode_blob)) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] enabled without mode blob\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] enabled without mode blob\n",
>> + crtc->base.id, crtc->name);
>> return -EINVAL;
>> }
>>
>> - if (drm_core_check_feature(crtc->dev, DRIVER_ATOMIC) &&
>> + if (drm_core_check_feature(dev, DRIVER_ATOMIC) &&
>> WARN_ON(!new_crtc_state->enable && new_crtc_state->mode_blob)) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] disabled with mode blob\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] disabled with mode blob\n",
>> + crtc->base.id, crtc->name);
>> return -EINVAL;
>> }
>>
>> @@ -368,8 +371,8 @@ static int drm_atomic_crtc_check(const struct drm_crtc_state *old_crtc_state,
>> */
>> if (new_crtc_state->event &&
>> !new_crtc_state->active && !old_crtc_state->active) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] requesting event but off\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] requesting event but off\n",
>> + crtc->base.id, crtc->name);
>> return -EINVAL;
>> }
>>
>> @@ -402,6 +405,7 @@ static void drm_atomic_crtc_print_state(struct drm_printer *p,
>> static int drm_atomic_connector_check(struct drm_connector *connector,
>> struct drm_connector_state *state)
>> {
>> + struct drm_device *dev = connector->dev;
>> struct drm_crtc_state *crtc_state;
>> struct drm_writeback_job *writeback_job = state->writeback_job;
>> const struct drm_display_info *info = &connector->display_info;
>> @@ -414,8 +418,8 @@ static int drm_atomic_connector_check(struct drm_connector *connector,
>> return 0;
>>
>> if (writeback_job->fb && !state->crtc) {
>> - DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] framebuffer without CRTC\n",
>> - connector->base.id, connector->name);
>> + drm_dbg_atomic(dev, "[CONNECTOR:%d:%s] framebuffer without CRTC\n",
>> + connector->base.id, connector->name);
>> return -EINVAL;
>> }
>>
>> @@ -424,16 +428,16 @@ static int drm_atomic_connector_check(struct drm_connector *connector,
>> state->crtc);
>>
>> if (writeback_job->fb && !crtc_state->active) {
>> - DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] has framebuffer, but [CRTC:%d] is off\n",
>> - connector->base.id, connector->name,
>> - state->crtc->base.id);
>> + drm_dbg_atomic(dev, "[CONNECTOR:%d:%s] has framebuffer, but [CRTC:%d] is off\n",
>> + connector->base.id, connector->name,
>> + state->crtc->base.id);
>> return -EINVAL;
>> }
>>
>> if (!writeback_job->fb) {
>> if (writeback_job->out_fence) {
>> - DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] requesting out-fence without framebuffer\n",
>> - connector->base.id, connector->name);
>> + drm_dbg_atomic(dev, "[CONNECTOR:%d:%s] requesting out-fence without framebuffer\n",
>> + connector->base.id, connector->name);
>> return -EINVAL;
>> }
>>
>> @@ -463,8 +467,9 @@ struct drm_plane_state *
>> drm_atomic_get_plane_state(struct drm_atomic_state *state,
>> struct drm_plane *plane)
>> {
>> - int ret, index = drm_plane_index(plane);
>> + struct drm_device *dev = state->dev;
>> struct drm_plane_state *plane_state;
>> + int ret, index = drm_plane_index(plane);
>>
>> WARN_ON(!state->acquire_ctx);
>>
>> @@ -491,8 +496,8 @@ drm_atomic_get_plane_state(struct drm_atomic_state *state,
>> state->planes[index].new_state = plane_state;
>> plane_state->state = state;
>>
>> - DRM_DEBUG_ATOMIC("Added [PLANE:%d:%s] %p state to %p\n",
>> - plane->base.id, plane->name, plane_state, state);
>> + drm_dbg_atomic(dev, "Added [PLANE:%d:%s] %p state to %p\n",
>> + plane->base.id, plane->name, plane_state, state);
>>
>> if (plane_state->crtc) {
>> struct drm_crtc_state *crtc_state;
>> @@ -539,6 +544,7 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> const struct drm_plane_state *new_plane_state)
>> {
>> struct drm_plane *plane = new_plane_state->plane;
>> + struct drm_device *dev = plane->dev;
>> struct drm_crtc *crtc = new_plane_state->crtc;
>> const struct drm_framebuffer *fb = new_plane_state->fb;
>> unsigned int fb_width, fb_height;
>> @@ -548,12 +554,12 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>>
>> /* either *both* CRTC and FB must be set, or neither */
>> if (crtc && !fb) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] CRTC set but no FB\n",
>> - plane->base.id, plane->name);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] CRTC set but no FB\n",
>> + plane->base.id, plane->name);
>> return -EINVAL;
>> } else if (fb && !crtc) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] FB set but no CRTC\n",
>> - plane->base.id, plane->name);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] FB set but no CRTC\n",
>> + plane->base.id, plane->name);
>> return -EINVAL;
>> }
>>
>> @@ -563,9 +569,9 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>>
>> /* Check whether this plane is usable on this CRTC */
>> if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
>> - DRM_DEBUG_ATOMIC("Invalid [CRTC:%d:%s] for [PLANE:%d:%s]\n",
>> - crtc->base.id, crtc->name,
>> - plane->base.id, plane->name);
>> + drm_dbg_atomic(dev, "Invalid [CRTC:%d:%s] for [PLANE:%d:%s]\n",
>> + crtc->base.id, crtc->name,
>> + plane->base.id, plane->name);
>> return -EINVAL;
>> }
>>
>> @@ -574,11 +580,11 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> fb->modifier);
>> if (ret) {
>> struct drm_format_name_buf format_name;
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] invalid pixel format %s, modifier 0x%llx\n",
>> - plane->base.id, plane->name,
>> - drm_get_format_name(fb->format->format,
>> - &format_name),
>> - fb->modifier);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] invalid pixel format %s, modifier 0x%llx\n",
>> + plane->base.id, plane->name,
>> + drm_get_format_name(fb->format->format,
>> + &format_name),
>> + fb->modifier);
>> return ret;
>> }
>>
>> @@ -587,10 +593,10 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> new_plane_state->crtc_x > INT_MAX - (int32_t) new_plane_state->crtc_w ||
>> new_plane_state->crtc_h > INT_MAX ||
>> new_plane_state->crtc_y > INT_MAX - (int32_t) new_plane_state->crtc_h) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] invalid CRTC coordinates %ux%u+%d+%d\n",
>> - plane->base.id, plane->name,
>> - new_plane_state->crtc_w, new_plane_state->crtc_h,
>> - new_plane_state->crtc_x, new_plane_state->crtc_y);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] invalid CRTC coordinates %ux%u+%d+%d\n",
>> + plane->base.id, plane->name,
>> + new_plane_state->crtc_w, new_plane_state->crtc_h,
>> + new_plane_state->crtc_x, new_plane_state->crtc_y);
>> return -ERANGE;
>> }
>>
>> @@ -602,18 +608,18 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> new_plane_state->src_x > fb_width - new_plane_state->src_w ||
>> new_plane_state->src_h > fb_height ||
>> new_plane_state->src_y > fb_height - new_plane_state->src_h) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] invalid source coordinates "
>> - "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
>> - plane->base.id, plane->name,
>> - new_plane_state->src_w >> 16,
>> - ((new_plane_state->src_w & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_h >> 16,
>> - ((new_plane_state->src_h & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_x >> 16,
>> - ((new_plane_state->src_x & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_y >> 16,
>> - ((new_plane_state->src_y & 0xffff) * 15625) >> 10,
>> - fb->width, fb->height);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] invalid source coordinates "
>> + "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
>> + plane->base.id, plane->name,
>> + new_plane_state->src_w >> 16,
>> + ((new_plane_state->src_w & 0xffff) * 15625) >> 10,
>> + new_plane_state->src_h >> 16,
>> + ((new_plane_state->src_h & 0xffff) * 15625) >> 10,
>> + new_plane_state->src_x >> 16,
>> + ((new_plane_state->src_x & 0xffff) * 15625) >> 10,
>> + new_plane_state->src_y >> 16,
>> + ((new_plane_state->src_y & 0xffff) * 15625) >> 10,
>> + fb->width, fb->height);
>> return -ENOSPC;
>> }
>>
>> @@ -628,9 +634,9 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> clips->y1 < 0 ||
>> clips->x2 > fb_width ||
>> clips->y2 > fb_height) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] invalid damage clip %d %d %d %d\n",
>> - plane->base.id, plane->name, clips->x1,
>> - clips->y1, clips->x2, clips->y2);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] invalid damage clip %d %d %d %d\n",
>> + plane->base.id, plane->name, clips->x1,
>> + clips->y1, clips->x2, clips->y2);
>> return -EINVAL;
>> }
>> clips++;
>> @@ -638,8 +644,8 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
>> }
>>
>> if (plane_switching_crtc(old_plane_state, new_plane_state)) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] switching CRTC directly\n",
>> - plane->base.id, plane->name);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] switching CRTC directly\n",
>> + plane->base.id, plane->name);
>> return -EINVAL;
>> }
>>
>> @@ -766,6 +772,7 @@ struct drm_private_state *
>> drm_atomic_get_private_obj_state(struct drm_atomic_state *state,
>> struct drm_private_obj *obj)
>> {
>> + struct drm_device *dev = state->dev;
>> int index, num_objs, i, ret;
>> size_t size;
>> struct __drm_private_objs_state *arr;
>> @@ -801,8 +808,8 @@ drm_atomic_get_private_obj_state(struct drm_atomic_state *state,
>>
>> state->num_private_objs = num_objs;
>>
>> - DRM_DEBUG_ATOMIC("Added new private object %p state %p to %p\n",
>> - obj, obj_state, state);
>> + drm_dbg_atomic(dev, "Added new private object %p state %p to %p\n",
>> + obj, obj_state, state);
>>
>> return obj_state;
>> }
>> @@ -940,6 +947,7 @@ struct drm_connector_state *
>> drm_atomic_get_connector_state(struct drm_atomic_state *state,
>> struct drm_connector *connector)
>> {
>> + struct drm_device *dev = state->dev;
>> int ret, index;
>> struct drm_mode_config *config = &connector->dev->mode_config;
>> struct drm_connector_state *connector_state;
>> @@ -981,9 +989,9 @@ drm_atomic_get_connector_state(struct drm_atomic_state *state,
>> state->connectors[index].ptr = connector;
>> connector_state->state = state;
>>
>> - DRM_DEBUG_ATOMIC("Added [CONNECTOR:%d:%s] %p state to %p\n",
>> - connector->base.id, connector->name,
>> - connector_state, state);
>> + drm_dbg_atomic(dev, "Added [CONNECTOR:%d:%s] %p state to %p\n",
>> + connector->base.id, connector->name,
>> + connector_state, state);
>>
>> if (connector_state->crtc) {
>> struct drm_crtc_state *crtc_state;
>> @@ -1036,7 +1044,8 @@ int
>> drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
>> struct drm_crtc *crtc)
>> {
>> - struct drm_mode_config *config = &state->dev->mode_config;
>> + struct drm_device *dev = state->dev;
>> + struct drm_mode_config *config = &dev->mode_config;
>> struct drm_connector *connector;
>> struct drm_connector_state *conn_state;
>> struct drm_connector_list_iter conn_iter;
>> @@ -1051,8 +1060,8 @@ drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
>> if (ret)
>> return ret;
>>
>> - DRM_DEBUG_ATOMIC("Adding all current connectors for [CRTC:%d:%s] to %p\n",
>> - crtc->base.id, crtc->name, state);
>> + drm_dbg_atomic(dev, "Adding all current connectors for [CRTC:%d:%s] to %p\n",
>> + crtc->base.id, crtc->name, state);
>>
>> /*
>> * Changed connectors are already in @state, so only need to look
>> @@ -1099,14 +1108,15 @@ int
>> drm_atomic_add_affected_planes(struct drm_atomic_state *state,
>> struct drm_crtc *crtc)
>> {
>> + struct drm_device *dev = state->dev;
>> const struct drm_crtc_state *old_crtc_state =
>> drm_atomic_get_old_crtc_state(state, crtc);
>> struct drm_plane *plane;
>>
>> WARN_ON(!drm_atomic_get_new_crtc_state(state, crtc));
>>
>> - DRM_DEBUG_ATOMIC("Adding all current planes for [CRTC:%d:%s] to %p\n",
>> - crtc->base.id, crtc->name, state);
>> + drm_dbg_atomic(dev, "Adding all current planes for [CRTC:%d:%s] to %p\n",
>> + crtc->base.id, crtc->name, state);
>>
>> drm_for_each_plane_mask(plane, state->dev, old_crtc_state->plane_mask) {
>> struct drm_plane_state *plane_state =
>> @@ -1144,13 +1154,13 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
>> struct drm_connector_state *conn_state;
>> int i, ret = 0;
>>
>> - DRM_DEBUG_ATOMIC("checking %p\n", state);
>> + drm_dbg_atomic(dev, "checking %p\n", state);
>>
>> for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) {
>> ret = drm_atomic_plane_check(old_plane_state, new_plane_state);
>> if (ret) {
>> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] atomic core check failed\n",
>> - plane->base.id, plane->name);
>> + drm_dbg_atomic(dev, "[PLANE:%d:%s] atomic core check failed\n",
>> + plane->base.id, plane->name);
>> return ret;
>> }
>> }
>> @@ -1158,8 +1168,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
>> for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
>> ret = drm_atomic_crtc_check(old_crtc_state, new_crtc_state);
>> if (ret) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] atomic core check failed\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] atomic core check failed\n",
>> + crtc->base.id, crtc->name);
>> return ret;
>> }
>> }
>> @@ -1167,8 +1177,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
>> for_each_new_connector_in_state(state, conn, conn_state, i) {
>> ret = drm_atomic_connector_check(conn, conn_state);
>> if (ret) {
>> - DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] atomic core check failed\n",
>> - conn->base.id, conn->name);
>> + drm_dbg_atomic(dev, "[CONNECTOR:%d:%s] atomic core check failed\n",
>> + conn->base.id, conn->name);
>> return ret;
>> }
>> }
>> @@ -1177,8 +1187,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
>> ret = config->funcs->atomic_check(state->dev, state);
>>
>> if (ret) {
>> - DRM_DEBUG_ATOMIC("atomic driver check for %p failed: %d\n",
>> - state, ret);
>> + drm_dbg_atomic(dev, "atomic driver check for %p failed: %d\n",
>> + state, ret);
>> return ret;
>> }
>> }
>> @@ -1186,8 +1196,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
>> if (!state->allow_modeset) {
>> for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
>> if (drm_atomic_crtc_needs_modeset(new_crtc_state)) {
>> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] requires full modeset\n",
>> - crtc->base.id, crtc->name);
>> + drm_dbg_atomic(dev, "[CRTC:%d:%s] requires full modeset\n",
>> + crtc->base.id, crtc->name);
>> return -EINVAL;
>> }
>> }
>> @@ -1213,14 +1223,15 @@ EXPORT_SYMBOL(drm_atomic_check_only);
>> */
>> int drm_atomic_commit(struct drm_atomic_state *state)
>> {
>> - struct drm_mode_config *config = &state->dev->mode_config;
>> + struct drm_device *dev = state->dev;
>> + struct drm_mode_config *config = &dev->mode_config;
>> int ret;
>>
>> ret = drm_atomic_check_only(state);
>> if (ret)
>> return ret;
>>
>> - DRM_DEBUG_ATOMIC("committing %p\n", state);
>> + drm_dbg_atomic(dev, "committing %p\n", state);
>>
>> return config->funcs->atomic_commit(state->dev, state, false);
>> }
>> @@ -1242,14 +1253,15 @@ EXPORT_SYMBOL(drm_atomic_commit);
>> */
>> int drm_atomic_nonblocking_commit(struct drm_atomic_state *state)
>> {
>> - struct drm_mode_config *config = &state->dev->mode_config;
>> + struct drm_device *dev = state->dev;
>> + struct drm_mode_config *config = &dev->mode_config;
>> int ret;
>>
>> ret = drm_atomic_check_only(state);
>> if (ret)
>> return ret;
>>
>> - DRM_DEBUG_ATOMIC("committing %p nonblocking\n", state);
>> + drm_dbg_atomic(dev, "committing %p nonblocking\n", state);
>>
>> return config->funcs->atomic_commit(state->dev, state, true);
>> }
>> @@ -1425,7 +1437,8 @@ EXPORT_SYMBOL(__drm_atomic_helper_set_config);
>>
>> void drm_atomic_print_state(const struct drm_atomic_state *state)
>> {
>> - struct drm_printer p = drm_info_printer(state->dev->dev);
>> + struct drm_device *dev = state->dev;
>> + struct drm_printer p = drm_info_printer(dev->dev);
>> struct drm_plane *plane;
>> struct drm_plane_state *plane_state;
>> struct drm_crtc *crtc;
>> @@ -1434,7 +1447,7 @@ void drm_atomic_print_state(const struct drm_atomic_state *state)
>> struct drm_connector_state *connector_state;
>> int i;
>>
>> - DRM_DEBUG_ATOMIC("checking %p\n", state);
>> + drm_dbg_atomic(dev, "checking %p\n", state);
>>
>> for_each_new_plane_in_state(state, plane, plane_state, i)
>> drm_atomic_plane_print_state(&p, plane_state);
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-12-12 8:33 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-10 12:30 [PATCH 1/8] drm/print: introduce new struct drm_device based logging macros Jani Nikula
2019-12-10 12:30 ` [Intel-gfx] " Jani Nikula
2019-12-10 12:30 ` [PATCH 2/8] drm/client: convert to drm device based logging Jani Nikula
2019-12-10 12:30 ` [Intel-gfx] " Jani Nikula
2019-12-17 18:51 ` Sam Ravnborg
2019-12-17 18:51 ` [Intel-gfx] " Sam Ravnborg
2019-12-10 12:30 ` [PATCH 3/8] drm/fb-helper: " Jani Nikula
2019-12-10 12:30 ` [Intel-gfx] " Jani Nikula
2019-12-17 18:56 ` Sam Ravnborg
2019-12-17 18:56 ` [Intel-gfx] " Sam Ravnborg
2019-12-10 12:30 ` [PATCH 4/8] drm/gem-fb-helper: " Jani Nikula
2019-12-10 12:30 ` [Intel-gfx] " Jani Nikula
2019-12-17 18:57 ` Sam Ravnborg
2019-12-17 18:57 ` [Intel-gfx] " Sam Ravnborg
2019-12-19 14:23 ` Jani Nikula
2019-12-19 14:23 ` [Intel-gfx] " Jani Nikula
2019-12-10 12:30 ` [PATCH 5/8] drm/mipi-dbi: " Jani Nikula
2019-12-10 12:30 ` [Intel-gfx] " Jani Nikula
2019-12-17 19:00 ` Sam Ravnborg
2019-12-17 19:00 ` [Intel-gfx] " Sam Ravnborg
2019-12-17 19:10 ` Sam Ravnborg
2019-12-17 19:10 ` [Intel-gfx] " Sam Ravnborg
2019-12-10 12:30 ` [PATCH 6/8] drm/atomic: " Jani Nikula
2019-12-10 12:30 ` [Intel-gfx] " Jani Nikula
2019-12-12 8:07 ` [6/8] " james qian wang (Arm Technology China)
2019-12-12 8:07 ` [Intel-gfx] " james qian wang (Arm Technology China)
2019-12-12 8:33 ` Jani Nikula [this message]
2019-12-12 8:33 ` Jani Nikula
2019-12-17 19:07 ` [PATCH 6/8] " Sam Ravnborg
2019-12-17 19:07 ` [Intel-gfx] " Sam Ravnborg
2019-12-10 12:30 ` [PATCH 7/8] drm/i915/uc: " Jani Nikula
2019-12-10 12:30 ` [Intel-gfx] " Jani Nikula
2019-12-10 12:30 ` [PATCH 8/8] drm/i915/wopcm: " Jani Nikula
2019-12-10 12:30 ` [Intel-gfx] " Jani Nikula
2019-12-10 12:34 ` [PATCH 1/8] drm/print: introduce new struct drm_device based logging macros Jani Nikula
2019-12-10 12:34 ` [Intel-gfx] " Jani Nikula
2019-12-10 22:07 ` Daniel Vetter
2019-12-10 22:07 ` [Intel-gfx] " Daniel Vetter
2019-12-10 19:27 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/8] " Patchwork
2019-12-10 19:52 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2019-12-12 21:53 ` [PATCH 1/8] " Sam Ravnborg
2019-12-12 21:53 ` [Intel-gfx] " Sam Ravnborg
2019-12-13 14:41 ` Jani Nikula
2019-12-13 14:41 ` [Intel-gfx] " Jani Nikula
2019-12-13 13:48 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/8] drm/print: introduce new struct drm_device based logging macros (rev2) Patchwork
2019-12-13 15:01 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2019-12-13 19:40 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/8] drm/print: introduce new struct drm_device based logging macros (rev3) Patchwork
2019-12-13 20:22 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2019-12-14 16:10 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2019-12-17 14:45 ` [PATCH 1/8] drm/print: introduce new struct drm_device based logging macros Jani Nikula
2019-12-17 14:45 ` [Intel-gfx] " Jani Nikula
2019-12-17 16:11 ` Sam Ravnborg
2019-12-17 16:11 ` [Intel-gfx] " Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87zhfy0wpw.fsf@intel.com \
--to=jani.nikula@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=james.qian.wang@arm.com \
--cc=nd@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.