From: Duy Nguyen <pclouds@gmail.com>
To: Ben Peart <peartben@gmail.com>
Cc: Git Mailing List <git@vger.kernel.org>,
Junio C Hamano <gitster@pobox.com>,
Ben Peart <benpeart@microsoft.com>
Subject: Re: [PATCH v7 6/7] ieot: add Index Entry Offset Table (IEOT) extension
Date: Tue, 2 Oct 2018 19:02:09 +0200 [thread overview]
Message-ID: <CACsJy8BEk9q0DNzXLUo0BgN3DUYYk=vSQcLqtQY=-JLAn74RXg@mail.gmail.com> (raw)
In-Reply-To: <351b9746-6c2e-a658-3f51-71c1f4cbc3ac@gmail.com>
On Tue, Oct 2, 2018 at 6:34 PM Ben Peart <peartben@gmail.com> wrote:
> >> + offset = lseek(newfd, 0, SEEK_CUR) + write_buffer_len;
> >
> > This only works correctly if the ce_write_entry() from the last
> > iteration has flushed everything to out to newfd. Maybe it does, but
> > it's error prone to rely on that in my opinion. Maybe we need an
> > explicit ce_write_flush() here to make sure.
> >
>
> This logic already takes any unflushed data into account - the offset is
> what has been flushed to disk (lseek) plus the amount still in the
> buffer (write_buffer_len) waiting to be flushed. I don't see any need
> to force an additional flush and adding one could have a negative impact
> on performance.
Eck! How did I miss that write_buffer_len :P
--
Duy
next prev parent reply other threads:[~2018-10-02 17:02 UTC|newest]
Thread overview: 199+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-23 15:41 [PATCH v1] read-cache: speed up index load through parallelization Ben Peart
2018-08-23 17:31 ` Stefan Beller
2018-08-23 19:44 ` Ben Peart
2018-08-24 18:40 ` Duy Nguyen
2018-08-28 14:53 ` Ben Peart
2018-08-23 18:06 ` Junio C Hamano
2018-08-23 20:33 ` Ben Peart
2018-08-24 15:37 ` Duy Nguyen
2018-08-24 15:57 ` Duy Nguyen
2018-08-24 17:28 ` Ben Peart
2018-08-25 6:44 ` [PATCH] read-cache.c: optimize reading index format v4 Nguyễn Thái Ngọc Duy
2018-08-27 19:36 ` Junio C Hamano
2018-08-28 19:25 ` Duy Nguyen
2018-08-28 23:54 ` Ben Peart
2018-08-29 17:14 ` Junio C Hamano
2018-09-04 16:08 ` Duy Nguyen
2018-09-02 13:19 ` [PATCH v2 0/1] " Nguyễn Thái Ngọc Duy
2018-09-02 13:19 ` [PATCH v2 1/1] read-cache.c: " Nguyễn Thái Ngọc Duy
2018-09-04 18:58 ` Junio C Hamano
2018-09-04 19:31 ` Junio C Hamano
2018-08-24 18:20 ` [PATCH v1] read-cache: speed up index load through parallelization Duy Nguyen
2018-08-24 18:40 ` Ben Peart
2018-08-24 19:00 ` Duy Nguyen
2018-08-24 19:57 ` Ben Peart
2018-08-29 15:25 ` [PATCH v2 0/3] " Ben Peart
2018-08-29 15:25 ` [PATCH v2 1/3] " Ben Peart
2018-08-29 17:14 ` Junio C Hamano
2018-08-29 21:35 ` Ben Peart
2018-09-03 19:16 ` Duy Nguyen
2018-08-29 15:25 ` [PATCH v2 2/3] read-cache: load cache extensions on worker thread Ben Peart
2018-08-29 17:12 ` Junio C Hamano
2018-08-29 21:42 ` Ben Peart
2018-08-29 22:19 ` Junio C Hamano
2018-09-03 19:21 ` Duy Nguyen
2018-09-03 19:27 ` Duy Nguyen
2018-08-29 15:25 ` [PATCH v2 3/3] read-cache: micro-optimize expand_name_field() to speed up V4 index parsing Ben Peart
2018-09-06 21:03 ` [PATCH v3 0/4] read-cache: speed up index load through parallelization Ben Peart
2018-09-06 21:03 ` [PATCH v3 1/4] read-cache: optimize expand_name_field() to speed up V4 index parsing Ben Peart
2018-09-06 21:03 ` [PATCH v3 2/4] eoie: add End of Index Entry (EOIE) extension Ben Peart
2018-09-07 17:55 ` Junio C Hamano
2018-09-07 20:23 ` Ben Peart
2018-09-08 6:29 ` Martin Ågren
2018-09-08 14:03 ` Ben Peart
2018-09-08 17:08 ` Martin Ågren
2018-09-06 21:03 ` [PATCH v3 3/4] read-cache: load cache extensions on a worker thread Ben Peart
2018-09-07 21:10 ` Junio C Hamano
2018-09-08 14:56 ` Ben Peart
2018-09-06 21:03 ` [PATCH v3 4/4] read-cache: speed up index load through parallelization Ben Peart
2018-09-07 4:16 ` Torsten Bögershausen
2018-09-07 13:43 ` Ben Peart
2018-09-07 17:21 ` [PATCH v3 0/4] " Junio C Hamano
2018-09-07 18:31 ` Ben Peart
2018-09-08 13:18 ` Duy Nguyen
2018-09-11 23:26 ` [PATCH v4 0/5] " Ben Peart
2018-09-11 23:26 ` [PATCH v4 1/5] eoie: add End of Index Entry (EOIE) extension Ben Peart
2018-09-11 23:26 ` [PATCH v4 2/5] read-cache: load cache extensions on a worker thread Ben Peart
2018-09-11 23:26 ` [PATCH v4 3/5] read-cache: speed up index load through parallelization Ben Peart
2018-09-11 23:26 ` [PATCH v4 4/5] read-cache.c: optimize reading index format v4 Ben Peart
2018-09-11 23:26 ` [PATCH v4 5/5] read-cache: clean up casting and byte decoding Ben Peart
2018-09-12 14:34 ` [PATCH v4 0/5] read-cache: speed up index load through parallelization Ben Peart
2018-09-12 16:18 ` [PATCH v5 " Ben Peart
2018-09-12 16:18 ` [PATCH v5 1/5] eoie: add End of Index Entry (EOIE) extension Ben Peart
2018-09-13 22:44 ` Junio C Hamano
2018-09-15 10:02 ` Duy Nguyen
2018-09-17 14:54 ` Ben Peart
2018-09-17 16:05 ` Duy Nguyen
2018-09-17 17:31 ` Junio C Hamano
2018-09-17 17:38 ` Duy Nguyen
2018-09-17 19:08 ` Junio C Hamano
2018-09-12 16:18 ` [PATCH v5 2/5] read-cache: load cache extensions on a worker thread Ben Peart
2018-09-15 10:22 ` Duy Nguyen
2018-09-15 10:24 ` Duy Nguyen
2018-09-17 16:38 ` Ben Peart
2018-09-15 16:23 ` Duy Nguyen
2018-09-17 17:19 ` Junio C Hamano
2018-09-17 16:26 ` Ben Peart
2018-09-17 16:45 ` Duy Nguyen
2018-09-17 21:32 ` Junio C Hamano
2018-09-12 16:18 ` [PATCH v5 3/5] read-cache: load cache entries on worker threads Ben Peart
2018-09-15 10:31 ` Duy Nguyen
2018-09-17 17:25 ` Ben Peart
2018-09-15 11:07 ` Duy Nguyen
2018-09-15 11:09 ` Duy Nguyen
2018-09-17 18:52 ` Ben Peart
2018-09-15 11:29 ` Duy Nguyen
2018-09-12 16:18 ` [PATCH v5 4/5] read-cache.c: optimize reading index format v4 Ben Peart
2018-09-12 16:18 ` [PATCH v5 5/5] read-cache: clean up casting and byte decoding Ben Peart
2018-09-26 19:54 ` [PATCH v6 0/7] speed up index load through parallelization Ben Peart
2018-09-26 19:54 ` [PATCH v6 1/7] read-cache.c: optimize reading index format v4 Ben Peart
2018-09-26 19:54 ` [PATCH v6 2/7] read-cache: clean up casting and byte decoding Ben Peart
2018-09-26 19:54 ` [PATCH v6 3/7] eoie: add End of Index Entry (EOIE) extension Ben Peart
2018-09-28 0:19 ` SZEDER Gábor
2018-09-28 18:38 ` Ben Peart
2018-09-29 0:51 ` SZEDER Gábor
2018-09-29 5:45 ` Duy Nguyen
2018-09-29 18:24 ` Junio C Hamano
2018-09-26 19:54 ` [PATCH v6 4/7] config: add new index.threads config setting Ben Peart
2018-09-28 0:26 ` SZEDER Gábor
2018-09-28 13:39 ` Ben Peart
2018-09-28 17:07 ` Junio C Hamano
2018-09-28 19:41 ` Ben Peart
2018-09-28 20:30 ` Ramsay Jones
2018-09-28 22:15 ` Junio C Hamano
2018-10-01 13:17 ` Ben Peart
2018-10-01 15:06 ` SZEDER Gábor
2018-09-26 19:54 ` [PATCH v6 5/7] read-cache: load cache extensions on a worker thread Ben Peart
2018-09-26 19:54 ` [PATCH v6 6/7] ieot: add Index Entry Offset Table (IEOT) extension Ben Peart
2018-09-26 19:54 ` [PATCH v6 7/7] read-cache: load cache entries on worker threads Ben Peart
2018-09-26 22:06 ` [PATCH v6 0/7] speed up index load through parallelization Junio C Hamano
2018-09-27 17:13 ` Duy Nguyen
2018-10-01 13:45 ` [PATCH v7 " Ben Peart
2018-10-01 13:45 ` [PATCH v7 1/7] read-cache.c: optimize reading index format v4 Ben Peart
2018-10-01 13:45 ` [PATCH v7 2/7] read-cache: clean up casting and byte decoding Ben Peart
2018-10-01 15:10 ` Duy Nguyen
2018-10-01 13:45 ` [PATCH v7 3/7] eoie: add End of Index Entry (EOIE) extension Ben Peart
2018-10-01 15:17 ` SZEDER Gábor
2018-10-02 14:34 ` Ben Peart
2018-10-01 15:30 ` Duy Nguyen
2018-10-02 15:13 ` Ben Peart
2018-10-01 13:45 ` [PATCH v7 4/7] config: add new index.threads config setting Ben Peart
2018-10-01 13:45 ` [PATCH v7 5/7] read-cache: load cache extensions on a worker thread Ben Peart
2018-10-01 15:50 ` Duy Nguyen
2018-10-02 15:00 ` Ben Peart
2018-10-01 13:45 ` [PATCH v7 6/7] ieot: add Index Entry Offset Table (IEOT) extension Ben Peart
2018-10-01 16:27 ` Duy Nguyen
2018-10-02 16:34 ` Ben Peart
2018-10-02 17:02 ` Duy Nguyen [this message]
2018-10-01 13:45 ` [PATCH v7 7/7] read-cache: load cache entries on worker threads Ben Peart
2018-10-01 17:09 ` Duy Nguyen
2018-10-02 19:09 ` Ben Peart
2018-10-10 15:59 ` [PATCH v8 0/7] speed up index load through parallelization Ben Peart
2018-10-10 15:59 ` [PATCH v8 1/7] read-cache.c: optimize reading index format v4 Ben Peart
2018-10-10 15:59 ` [PATCH v8 2/7] read-cache: clean up casting and byte decoding Ben Peart
2018-10-10 15:59 ` [PATCH v8 3/7] eoie: add End of Index Entry (EOIE) extension Ben Peart
2018-10-10 15:59 ` [PATCH v8 4/7] config: add new index.threads config setting Ben Peart
2018-10-10 15:59 ` [PATCH v8 5/7] read-cache: load cache extensions on a worker thread Ben Peart
2018-10-10 15:59 ` [PATCH v8 6/7] ieot: add Index Entry Offset Table (IEOT) extension Ben Peart
2018-10-10 15:59 ` [PATCH v8 7/7] read-cache: load cache entries on worker threads Ben Peart
2018-10-19 16:11 ` Jeff King
2018-10-22 2:14 ` Junio C Hamano
2018-10-22 14:40 ` Ben Peart
2018-10-12 3:18 ` [PATCH v8 0/7] speed up index load through parallelization Junio C Hamano
2018-10-14 12:28 ` Duy Nguyen
2018-10-15 17:33 ` Ben Peart
2018-11-13 0:38 ` [PATCH 0/3] Avoid confusing messages from new index extensions (Re: [PATCH v8 0/7] speed up index load through parallelization) Jonathan Nieder
2018-11-13 0:39 ` [PATCH 1/3] eoie: default to not writing EOIE section Jonathan Nieder
2018-11-13 1:05 ` Junio C Hamano
2018-11-13 15:14 ` Ben Peart
2018-11-13 18:25 ` Jonathan Nieder
2018-11-14 1:36 ` Junio C Hamano
2018-11-15 0:19 ` Jonathan Nieder
2018-11-13 0:39 ` [PATCH 2/3] ieot: default to not writing IEOT section Jonathan Nieder
2018-11-13 0:58 ` Jonathan Tan
2018-11-13 1:09 ` Junio C Hamano
2018-11-13 1:12 ` Jonathan Nieder
2018-11-13 15:37 ` Duy Nguyen
2018-11-13 18:09 ` Jonathan Nieder
2018-11-13 15:22 ` Ben Peart
2018-11-13 18:18 ` Jonathan Nieder
2018-11-13 19:15 ` Ben Peart
2018-11-13 21:08 ` Jonathan Nieder
2018-11-14 18:09 ` Ben Peart
2018-11-15 0:05 ` Jonathan Nieder
2018-11-14 3:05 ` Junio C Hamano
2018-11-20 6:09 ` [PATCH v2 0/5] Avoid confusing messages from new index extensions Jonathan Nieder
2018-11-20 6:11 ` [PATCH 1/5] eoie: default to not writing EOIE section Jonathan Nieder
2018-11-20 13:06 ` Ben Peart
2018-11-20 13:21 ` SZEDER Gábor
2018-11-21 16:46 ` Jeff King
2018-11-22 0:47 ` Junio C Hamano
2018-11-20 15:01 ` Ben Peart
2018-11-20 6:12 ` [PATCH 2/5] ieot: default to not writing IEOT section Jonathan Nieder
2018-11-20 13:07 ` Ben Peart
2018-11-26 19:59 ` Stefan Beller
2018-11-26 21:47 ` Ben Peart
2018-11-26 22:02 ` Stefan Beller
2018-11-27 0:50 ` Junio C Hamano
2018-11-20 6:12 ` [PATCH 3/5] index: do not warn about unrecognized extensions Jonathan Nieder
2018-11-20 6:14 ` [PATCH 4/5] index: make index.threads=true enable ieot and eoie Jonathan Nieder
2018-11-20 13:24 ` Ben Peart
2018-11-20 6:15 ` [PATCH 5/5] index: offer advice for unknown index extensions Jonathan Nieder
2018-11-20 9:26 ` Ævar Arnfjörð Bjarmason
2018-11-20 13:30 ` Ben Peart
2018-11-21 0:22 ` Junio C Hamano
2018-11-21 0:39 ` Jonathan Nieder
2018-11-21 0:44 ` Jonathan Nieder
2018-11-21 5:01 ` Junio C Hamano
2018-11-21 5:04 ` Jonathan Nieder
2018-11-21 5:15 ` Junio C Hamano
2018-11-21 5:31 ` Junio C Hamano
2018-11-21 1:03 ` Jonathan Nieder
2018-11-21 4:23 ` Junio C Hamano
2018-11-21 4:57 ` Jonathan Nieder
2018-11-21 9:30 ` Ævar Arnfjörð Bjarmason
2018-11-13 0:40 ` [PATCH 3/3] index: do not warn about unrecognized extensions Jonathan Nieder
2018-11-13 1:10 ` Junio C Hamano
2018-11-13 15:25 ` Ben Peart
2018-11-14 3:24 ` Junio C Hamano
2018-11-14 18:19 ` Ben Peart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CACsJy8BEk9q0DNzXLUo0BgN3DUYYk=vSQcLqtQY=-JLAn74RXg@mail.gmail.com' \
--to=pclouds@gmail.com \
--cc=benpeart@microsoft.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=peartben@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.