Re: [PATCH v3 10/16] iio: adc: axp20x_adc: Minor code cleanups

From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Chen-Yu Tsai <wens@csie.org>, Jonathan Cameron <jic23@kernel.org>,
	Lee Jones <lee.jones@linaro.org>,
	Sebastian Reichel <sre@kernel.org>,
	Mark Brown <broonie@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	quic_gurus@quicinc.com,
	Sebastian Reichel <sebastian.reichel@collabora.com>,
	Michael Walle <michael@walle.cc>,
	"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
	devicetree <devicetree@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-iio <linux-iio@vger.kernel.org>,
	Linux PM <linux-pm@vger.kernel.org>
Subject: Re: [PATCH v3 10/16] iio: adc: axp20x_adc: Minor code cleanups
Date: Sun, 19 Jun 2022 12:51:26 +0200	[thread overview]
Message-ID: <CAHp75Vdfc=V8uBBF4m3pDtpjsrhqq06q=5fEBPCOiUmYQdSkGA@mail.gmail.com> (raw)
In-Reply-To: <20220618214009.2178567-11-aidanmacdonald.0x0@gmail.com>

On Sat, Jun 18, 2022 at 11:40 PM Aidan MacDonald
<aidanmacdonald.0x0@gmail.com> wrote:
>
> The code may be clearer if parameters are not re-purposed to hold
> temporary results like register values, so introduce local variables
> as necessary to avoid that. Also, use the common FIELD_PREP macro

FIELD_PREP()

> instead of a hand-rolled version.

...

>  #include <linux/property.h>
>  #include <linux/regmap.h>
>  #include <linux/thermal.h>
> +#include <linux/bitfield.h>

Keep it sorted?

...

> -       val = val ? 1 : 0;
> +       regval = val ? 1 : 0;
>

I think you may drop these two lines (including blank line) and...

>         switch (chan->channel) {
>         case AXP20X_GPIO0_V:
> -               reg = AXP20X_GPIO10_IN_RANGE_GPIO0;
> -               regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(val);
> +               regmask = AXP20X_GPIO10_IN_RANGE_GPIO0;
> +               regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO0, regval);

...use !!val as an argument here...

>                 break;
>
>         case AXP20X_GPIO1_V:
> -               reg = AXP20X_GPIO10_IN_RANGE_GPIO1;
> -               regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(val);
> +               regmask = AXP20X_GPIO10_IN_RANGE_GPIO1;
> +               regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO1, regval);

...and here.

>                 break;
>
>         default:
>                 return -EINVAL;
>         }

-- 
With Best Regards,
Andy Shevchenko