From: Nicolas Boichat <drinkcat@chromium.org>
To: Wen Gong <wgong@codeaurora.org>
Cc: ath10k@lists.infradead.org,
"open list:NETWORKING DRIVERS (WIRELESS)"
<linux-wireless@vger.kernel.org>
Subject: Re: [PATCH v2 7/7] ath10k: enable napi on RX path for sdio
Date: Wed, 28 Aug 2019 13:39:47 +0800 [thread overview]
Message-ID: <CANMq1KCQZCOw8kHn2MJfAT9fWoLCmz2jFWqHzd=9QOgZ7MeaXQ@mail.gmail.com> (raw)
In-Reply-To: <1566903707-27536-8-git-send-email-wgong@codeaurora.org>
On Tue, Aug 27, 2019 at 7:02 PM Wen Gong <wgong@codeaurora.org> wrote:
>
> For tcp RX, the quantity of tcp acks to remote is 1/2 of the quantity
> of tcp data from remote, then it will have many small length packets
> on TX path of sdio bus, then it reduce the RX packets's bandwidth of
> tcp.
>
> This patch enable napi on RX path, then the RX packet of tcp will not
> feed to tcp stack immeditely from mac80211 since GRO is enabled by
> default, it will feed to tcp stack after napi complete, if rx bundle
> is enabled, then it will feed to tcp stack one time for each bundle
> of RX. For example, RX bundle size is 32, then tcp stack will receive
> one large length packet, its length is neary 1500*32, then tcp stack
> will send a tcp ack for this large packet, this will reduce the tcp
> acks ratio from 1/2 to 1/32. This results in significant performance
> improvement for tcp RX.
>
> Tcp rx throughout is 240Mbps without this patch, and it arrive 390Mbps
> with this patch. The cpu usage has no obvious difference with and
> without NAPI.
>
> call stack for each RX packet on GRO path:
> (skb length is about 1500 bytes)
> skb_gro_receive ([kernel.kallsyms])
> tcp4_gro_receive ([kernel.kallsyms])
> inet_gro_receive ([kernel.kallsyms])
> dev_gro_receive ([kernel.kallsyms])
> napi_gro_receive ([kernel.kallsyms])
> ieee80211_deliver_skb ([mac80211])
> ieee80211_rx_handlers ([mac80211])
> ieee80211_prepare_and_rx_handle ([mac80211])
> ieee80211_rx_napi ([mac80211])
> ath10k_htt_rx_proc_rx_ind_hl ([ath10k_core])
> ath10k_htt_rx_pktlog_completion_handler ([ath10k_core])
> ath10k_sdio_napi_poll ([ath10k_sdio])
> net_rx_action ([kernel.kallsyms])
> softirqentry_text_start ([kernel.kallsyms])
> do_softirq ([kernel.kallsyms])
>
> call stack for napi complete and send tcp ack from tcp stack:
> (skb length is about 1500*32 bytes)
> _tcp_ack_snd_check ([kernel.kallsyms])
> tcp_v4_do_rcv ([kernel.kallsyms])
> tcp_v4_rcv ([kernel.kallsyms])
> local_deliver_finish ([kernel.kallsyms])
> ip_local_deliver ([kernel.kallsyms])
> ip_rcv_finish ([kernel.kallsyms])
> ip_rcv ([kernel.kallsyms])
> netif_receive_skb_core ([kernel.kallsyms])
> netif_receive_skb_one_core([kernel.kallsyms])
> netif_receive_skb ([kernel.kallsyms])
> netif_receive_skb_internal ([kernel.kallsyms])
> napi_gro_complete ([kernel.kallsyms])
> napi_gro_flush ([kernel.kallsyms])
> napi_complete_done ([kernel.kallsyms])
> ath10k_sdio_napi_poll ([ath10k_sdio])
> net_rx_action ([kernel.kallsyms])
> __softirqentry_text_start ([kernel.kallsyms])
> do_softirq ([kernel.kallsyms])
>
> Tested with QCA6174 SDIO with firmware
> WLAN.RMH.4.4.1-00007-QCARMSWP-1.
>
> Signed-off-by: Wen Gong <wgong@codeaurora.org>
> ---
> drivers/net/wireless/ath/ath10k/htt.c | 2 ++
> drivers/net/wireless/ath/ath10k/htt.h | 3 +++
> drivers/net/wireless/ath/ath10k/htt_rx.c | 46 ++++++++++++++++++++++++++------
> drivers/net/wireless/ath/ath10k/sdio.c | 33 +++++++++++++++++++++++
> 4 files changed, 76 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
> index 127b4e4..f69346f 100644
> --- a/drivers/net/wireless/ath/ath10k/htt.c
> +++ b/drivers/net/wireless/ath/ath10k/htt.c
> @@ -157,6 +157,8 @@ int ath10k_htt_connect(struct ath10k_htt *htt)
>
> htt->eid = conn_resp.eid;
>
> + skb_queue_head_init(&htt->rx_indication_head);
> +
> if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
> ep = &ar->htc.endpoint[htt->eid];
> ath10k_htc_setup_tx_req(ep);
> diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
> index 4851a2e..462a25b 100644
> --- a/drivers/net/wireless/ath/ath10k/htt.h
> +++ b/drivers/net/wireless/ath/ath10k/htt.h
> @@ -1879,6 +1879,8 @@ struct ath10k_htt {
> struct ath10k *ar;
> enum ath10k_htc_ep_id eid;
>
> + struct sk_buff_head rx_indication_head;
> +
> u8 target_version_major;
> u8 target_version_minor;
> struct completion target_version_received;
> @@ -2298,6 +2300,7 @@ int ath10k_htt_tx_mgmt_inc_pending(struct ath10k_htt *htt, bool is_mgmt,
> void ath10k_htt_rx_pktlog_completion_handler(struct ath10k *ar,
> struct sk_buff *skb);
> int ath10k_htt_txrx_compl_task(struct ath10k *ar, int budget);
> +int ath10k_htt_rx_hl_indication(struct ath10k *ar, int budget);
> void ath10k_htt_set_tx_ops(struct ath10k_htt *htt);
> void ath10k_htt_set_rx_ops(struct ath10k_htt *htt);
> #endif
> diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
> index e2d8b51..9340ae3 100644
> --- a/drivers/net/wireless/ath/ath10k/htt_rx.c
> +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
> @@ -2263,7 +2263,7 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
> if (mpdu_ranges->mpdu_range_status == HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR)
> rx_status->flag |= RX_FLAG_MMIC_ERROR;
>
> - ieee80211_rx_ni(ar->hw, skb);
> + ieee80211_rx_napi(ar->hw, NULL, skb, &ar->napi);
>
> /* We have delivered the skb to the upper layers (mac80211) so we
> * must not free it.
> @@ -3664,14 +3664,12 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
> break;
> }
> case HTT_T2H_MSG_TYPE_RX_IND:
> - if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL)
> - return ath10k_htt_rx_proc_rx_ind_hl(htt,
> - &resp->rx_ind_hl,
> - skb,
> - HTT_RX_PN_CHECK,
> - HTT_RX_NON_TKIP_MIC);
> - else
> + if (ar->bus_param.dev_type != ATH10K_DEV_TYPE_HL) {
> ath10k_htt_rx_proc_rx_ind_ll(htt, &resp->rx_ind);
> + } else {
> + skb_queue_tail(&htt->rx_indication_head, skb);
> + return false;
> + }
> break;
> case HTT_T2H_MSG_TYPE_PEER_MAP: {
> struct htt_peer_map_event ev = {
> @@ -3895,6 +3893,38 @@ static int ath10k_htt_rx_deliver_msdu(struct ath10k *ar, int quota, int budget)
> return quota;
> }
>
> +int ath10k_htt_rx_hl_indication(struct ath10k *ar, int budget)
> +{
> + struct htt_resp *resp;
> + struct ath10k_htt *htt = &ar->htt;
> + struct sk_buff *skb;
> + bool release;
> + int quota = 0;
> +
> + while (quota < budget) {
This looks like a for loop:
for (quota = 0; quota < budget; quota++)
> + skb = skb_dequeue(&htt->rx_indication_head);
> + if (!skb)
> + break;
> +
> + resp = (struct htt_resp *)skb->data;
> +
> + release = ath10k_htt_rx_proc_rx_ind_hl(htt,
> + &resp->rx_ind_hl,
> + skb,
> + HTT_RX_PN_CHECK,
> + HTT_RX_NON_TKIP_MIC);
> +
> + if (release)
> + dev_kfree_skb_any(skb);
> +
> + ath10k_dbg(ar, ATH10K_DBG_HTT, "rx indication poll pending count:%d\n",
> + skb_queue_len(&htt->rx_indication_head));
> + quota++;
> + }
> + return quota;
> +}
> +EXPORT_SYMBOL(ath10k_htt_rx_hl_indication);
> +
> int ath10k_htt_txrx_compl_task(struct ath10k *ar, int budget)
> {
> struct ath10k_htt *htt = &ar->htt;
> diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
> index a302eda..a1ef31e 100644
> --- a/drivers/net/wireless/ath/ath10k/sdio.c
> +++ b/drivers/net/wireless/ath/ath10k/sdio.c
> @@ -1406,6 +1406,9 @@ static void ath10k_rx_indication_async_work(struct work_struct *work)
> spin_lock_bh(&ar_sdio->wr_async_lock_rx);
> }
>
> + if (test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
> + napi_schedule(&ar->napi);
> +
> spin_unlock_bh(&ar_sdio->wr_async_lock_rx);
> }
>
> @@ -1824,6 +1827,8 @@ static int ath10k_sdio_hif_start(struct ath10k *ar)
> struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
> int ret;
>
> + napi_enable(&ar->napi);
> +
> /* Sleep 20 ms before HIF interrupts are disabled.
> * This will give target plenty of time to process the BMI done
> * request before interrupts are disabled.
> @@ -1962,6 +1967,9 @@ static void ath10k_sdio_hif_stop(struct ath10k *ar)
> }
>
> spin_unlock_bh(&ar_sdio->wr_async_lock);
> +
> + napi_synchronize(&ar->napi);
> + napi_disable(&ar->napi);
> }
>
> #ifdef CONFIG_PM
> @@ -2138,6 +2146,26 @@ static SIMPLE_DEV_PM_OPS(ath10k_sdio_pm_ops, ath10k_sdio_pm_suspend,
>
> #endif /* CONFIG_PM_SLEEP */
>
> +static int ath10k_sdio_napi_poll(struct napi_struct *ctx, int budget)
> +{
> + struct ath10k *ar = container_of(ctx, struct ath10k, napi);
> + int done = 0;
No need to initialize to 0;
> +
> + done = ath10k_htt_rx_hl_indication(ar, budget);
> + ath10k_dbg(ar, ATH10K_DBG_SDIO, "napi poll: done: %d,budget:%d\n", done, budget);
> +
> + if (done < budget)
> + napi_complete_done(ctx, done);
> +
> + return done;
> +}
> +
> +void ath10k_sdio_init_napi(struct ath10k *ar)
> +{
> + netif_napi_add(&ar->napi_dev, &ar->napi, ath10k_sdio_napi_poll,
> + ATH10K_NAPI_BUDGET);
> +}
> +
> static int ath10k_sdio_probe(struct sdio_func *func,
> const struct sdio_device_id *id)
> {
> @@ -2163,6 +2191,8 @@ static int ath10k_sdio_probe(struct sdio_func *func,
> return -ENOMEM;
> }
>
> + ath10k_sdio_init_napi(ar);
> +
> ath10k_dbg(ar, ATH10K_DBG_BOOT,
> "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n",
> func->num, func->vendor, func->device,
> @@ -2283,6 +2313,9 @@ static void ath10k_sdio_remove(struct sdio_func *func)
> func->num, func->vendor, func->device);
>
> ath10k_core_unregister(ar);
> +
> + netif_napi_del(&ar->napi);
> +
> ath10k_core_destroy(ar);
>
> flush_workqueue(ar_sdio->workqueue);
> --
> 1.9.1
>
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Boichat <drinkcat@chromium.org>
To: Wen Gong <wgong@codeaurora.org>
Cc: "open list:NETWORKING DRIVERS (WIRELESS)"
<linux-wireless@vger.kernel.org>,
ath10k@lists.infradead.org
Subject: Re: [PATCH v2 7/7] ath10k: enable napi on RX path for sdio
Date: Wed, 28 Aug 2019 13:39:47 +0800 [thread overview]
Message-ID: <CANMq1KCQZCOw8kHn2MJfAT9fWoLCmz2jFWqHzd=9QOgZ7MeaXQ@mail.gmail.com> (raw)
In-Reply-To: <1566903707-27536-8-git-send-email-wgong@codeaurora.org>
On Tue, Aug 27, 2019 at 7:02 PM Wen Gong <wgong@codeaurora.org> wrote:
>
> For tcp RX, the quantity of tcp acks to remote is 1/2 of the quantity
> of tcp data from remote, then it will have many small length packets
> on TX path of sdio bus, then it reduce the RX packets's bandwidth of
> tcp.
>
> This patch enable napi on RX path, then the RX packet of tcp will not
> feed to tcp stack immeditely from mac80211 since GRO is enabled by
> default, it will feed to tcp stack after napi complete, if rx bundle
> is enabled, then it will feed to tcp stack one time for each bundle
> of RX. For example, RX bundle size is 32, then tcp stack will receive
> one large length packet, its length is neary 1500*32, then tcp stack
> will send a tcp ack for this large packet, this will reduce the tcp
> acks ratio from 1/2 to 1/32. This results in significant performance
> improvement for tcp RX.
>
> Tcp rx throughout is 240Mbps without this patch, and it arrive 390Mbps
> with this patch. The cpu usage has no obvious difference with and
> without NAPI.
>
> call stack for each RX packet on GRO path:
> (skb length is about 1500 bytes)
> skb_gro_receive ([kernel.kallsyms])
> tcp4_gro_receive ([kernel.kallsyms])
> inet_gro_receive ([kernel.kallsyms])
> dev_gro_receive ([kernel.kallsyms])
> napi_gro_receive ([kernel.kallsyms])
> ieee80211_deliver_skb ([mac80211])
> ieee80211_rx_handlers ([mac80211])
> ieee80211_prepare_and_rx_handle ([mac80211])
> ieee80211_rx_napi ([mac80211])
> ath10k_htt_rx_proc_rx_ind_hl ([ath10k_core])
> ath10k_htt_rx_pktlog_completion_handler ([ath10k_core])
> ath10k_sdio_napi_poll ([ath10k_sdio])
> net_rx_action ([kernel.kallsyms])
> softirqentry_text_start ([kernel.kallsyms])
> do_softirq ([kernel.kallsyms])
>
> call stack for napi complete and send tcp ack from tcp stack:
> (skb length is about 1500*32 bytes)
> _tcp_ack_snd_check ([kernel.kallsyms])
> tcp_v4_do_rcv ([kernel.kallsyms])
> tcp_v4_rcv ([kernel.kallsyms])
> local_deliver_finish ([kernel.kallsyms])
> ip_local_deliver ([kernel.kallsyms])
> ip_rcv_finish ([kernel.kallsyms])
> ip_rcv ([kernel.kallsyms])
> netif_receive_skb_core ([kernel.kallsyms])
> netif_receive_skb_one_core([kernel.kallsyms])
> netif_receive_skb ([kernel.kallsyms])
> netif_receive_skb_internal ([kernel.kallsyms])
> napi_gro_complete ([kernel.kallsyms])
> napi_gro_flush ([kernel.kallsyms])
> napi_complete_done ([kernel.kallsyms])
> ath10k_sdio_napi_poll ([ath10k_sdio])
> net_rx_action ([kernel.kallsyms])
> __softirqentry_text_start ([kernel.kallsyms])
> do_softirq ([kernel.kallsyms])
>
> Tested with QCA6174 SDIO with firmware
> WLAN.RMH.4.4.1-00007-QCARMSWP-1.
>
> Signed-off-by: Wen Gong <wgong@codeaurora.org>
> ---
> drivers/net/wireless/ath/ath10k/htt.c | 2 ++
> drivers/net/wireless/ath/ath10k/htt.h | 3 +++
> drivers/net/wireless/ath/ath10k/htt_rx.c | 46 ++++++++++++++++++++++++++------
> drivers/net/wireless/ath/ath10k/sdio.c | 33 +++++++++++++++++++++++
> 4 files changed, 76 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
> index 127b4e4..f69346f 100644
> --- a/drivers/net/wireless/ath/ath10k/htt.c
> +++ b/drivers/net/wireless/ath/ath10k/htt.c
> @@ -157,6 +157,8 @@ int ath10k_htt_connect(struct ath10k_htt *htt)
>
> htt->eid = conn_resp.eid;
>
> + skb_queue_head_init(&htt->rx_indication_head);
> +
> if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
> ep = &ar->htc.endpoint[htt->eid];
> ath10k_htc_setup_tx_req(ep);
> diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
> index 4851a2e..462a25b 100644
> --- a/drivers/net/wireless/ath/ath10k/htt.h
> +++ b/drivers/net/wireless/ath/ath10k/htt.h
> @@ -1879,6 +1879,8 @@ struct ath10k_htt {
> struct ath10k *ar;
> enum ath10k_htc_ep_id eid;
>
> + struct sk_buff_head rx_indication_head;
> +
> u8 target_version_major;
> u8 target_version_minor;
> struct completion target_version_received;
> @@ -2298,6 +2300,7 @@ int ath10k_htt_tx_mgmt_inc_pending(struct ath10k_htt *htt, bool is_mgmt,
> void ath10k_htt_rx_pktlog_completion_handler(struct ath10k *ar,
> struct sk_buff *skb);
> int ath10k_htt_txrx_compl_task(struct ath10k *ar, int budget);
> +int ath10k_htt_rx_hl_indication(struct ath10k *ar, int budget);
> void ath10k_htt_set_tx_ops(struct ath10k_htt *htt);
> void ath10k_htt_set_rx_ops(struct ath10k_htt *htt);
> #endif
> diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
> index e2d8b51..9340ae3 100644
> --- a/drivers/net/wireless/ath/ath10k/htt_rx.c
> +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
> @@ -2263,7 +2263,7 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
> if (mpdu_ranges->mpdu_range_status == HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR)
> rx_status->flag |= RX_FLAG_MMIC_ERROR;
>
> - ieee80211_rx_ni(ar->hw, skb);
> + ieee80211_rx_napi(ar->hw, NULL, skb, &ar->napi);
>
> /* We have delivered the skb to the upper layers (mac80211) so we
> * must not free it.
> @@ -3664,14 +3664,12 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
> break;
> }
> case HTT_T2H_MSG_TYPE_RX_IND:
> - if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL)
> - return ath10k_htt_rx_proc_rx_ind_hl(htt,
> - &resp->rx_ind_hl,
> - skb,
> - HTT_RX_PN_CHECK,
> - HTT_RX_NON_TKIP_MIC);
> - else
> + if (ar->bus_param.dev_type != ATH10K_DEV_TYPE_HL) {
> ath10k_htt_rx_proc_rx_ind_ll(htt, &resp->rx_ind);
> + } else {
> + skb_queue_tail(&htt->rx_indication_head, skb);
> + return false;
> + }
> break;
> case HTT_T2H_MSG_TYPE_PEER_MAP: {
> struct htt_peer_map_event ev = {
> @@ -3895,6 +3893,38 @@ static int ath10k_htt_rx_deliver_msdu(struct ath10k *ar, int quota, int budget)
> return quota;
> }
>
> +int ath10k_htt_rx_hl_indication(struct ath10k *ar, int budget)
> +{
> + struct htt_resp *resp;
> + struct ath10k_htt *htt = &ar->htt;
> + struct sk_buff *skb;
> + bool release;
> + int quota = 0;
> +
> + while (quota < budget) {
This looks like a for loop:
for (quota = 0; quota < budget; quota++)
> + skb = skb_dequeue(&htt->rx_indication_head);
> + if (!skb)
> + break;
> +
> + resp = (struct htt_resp *)skb->data;
> +
> + release = ath10k_htt_rx_proc_rx_ind_hl(htt,
> + &resp->rx_ind_hl,
> + skb,
> + HTT_RX_PN_CHECK,
> + HTT_RX_NON_TKIP_MIC);
> +
> + if (release)
> + dev_kfree_skb_any(skb);
> +
> + ath10k_dbg(ar, ATH10K_DBG_HTT, "rx indication poll pending count:%d\n",
> + skb_queue_len(&htt->rx_indication_head));
> + quota++;
> + }
> + return quota;
> +}
> +EXPORT_SYMBOL(ath10k_htt_rx_hl_indication);
> +
> int ath10k_htt_txrx_compl_task(struct ath10k *ar, int budget)
> {
> struct ath10k_htt *htt = &ar->htt;
> diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
> index a302eda..a1ef31e 100644
> --- a/drivers/net/wireless/ath/ath10k/sdio.c
> +++ b/drivers/net/wireless/ath/ath10k/sdio.c
> @@ -1406,6 +1406,9 @@ static void ath10k_rx_indication_async_work(struct work_struct *work)
> spin_lock_bh(&ar_sdio->wr_async_lock_rx);
> }
>
> + if (test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
> + napi_schedule(&ar->napi);
> +
> spin_unlock_bh(&ar_sdio->wr_async_lock_rx);
> }
>
> @@ -1824,6 +1827,8 @@ static int ath10k_sdio_hif_start(struct ath10k *ar)
> struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
> int ret;
>
> + napi_enable(&ar->napi);
> +
> /* Sleep 20 ms before HIF interrupts are disabled.
> * This will give target plenty of time to process the BMI done
> * request before interrupts are disabled.
> @@ -1962,6 +1967,9 @@ static void ath10k_sdio_hif_stop(struct ath10k *ar)
> }
>
> spin_unlock_bh(&ar_sdio->wr_async_lock);
> +
> + napi_synchronize(&ar->napi);
> + napi_disable(&ar->napi);
> }
>
> #ifdef CONFIG_PM
> @@ -2138,6 +2146,26 @@ static SIMPLE_DEV_PM_OPS(ath10k_sdio_pm_ops, ath10k_sdio_pm_suspend,
>
> #endif /* CONFIG_PM_SLEEP */
>
> +static int ath10k_sdio_napi_poll(struct napi_struct *ctx, int budget)
> +{
> + struct ath10k *ar = container_of(ctx, struct ath10k, napi);
> + int done = 0;
No need to initialize to 0;
> +
> + done = ath10k_htt_rx_hl_indication(ar, budget);
> + ath10k_dbg(ar, ATH10K_DBG_SDIO, "napi poll: done: %d,budget:%d\n", done, budget);
> +
> + if (done < budget)
> + napi_complete_done(ctx, done);
> +
> + return done;
> +}
> +
> +void ath10k_sdio_init_napi(struct ath10k *ar)
> +{
> + netif_napi_add(&ar->napi_dev, &ar->napi, ath10k_sdio_napi_poll,
> + ATH10K_NAPI_BUDGET);
> +}
> +
> static int ath10k_sdio_probe(struct sdio_func *func,
> const struct sdio_device_id *id)
> {
> @@ -2163,6 +2191,8 @@ static int ath10k_sdio_probe(struct sdio_func *func,
> return -ENOMEM;
> }
>
> + ath10k_sdio_init_napi(ar);
> +
> ath10k_dbg(ar, ATH10K_DBG_BOOT,
> "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n",
> func->num, func->vendor, func->device,
> @@ -2283,6 +2313,9 @@ static void ath10k_sdio_remove(struct sdio_func *func)
> func->num, func->vendor, func->device);
>
> ath10k_core_unregister(ar);
> +
> + netif_napi_del(&ar->napi);
> +
> ath10k_core_destroy(ar);
>
> flush_workqueue(ar_sdio->workqueue);
> --
> 1.9.1
>
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2019-08-28 5:40 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-27 11:01 [PATCH v2 0/7] ath10k: improve throughout of tcp/udp TX/RX of sdio Wen Gong
2019-08-27 11:01 ` Wen Gong
2019-08-27 11:01 ` [PATCH v2 1/7] ath10k: enable RX bundle receive for sdio Wen Gong
2019-08-27 11:01 ` Wen Gong
2019-08-27 11:23 ` Nicolas Boichat
2019-08-27 11:23 ` Nicolas Boichat
2019-08-28 4:28 ` Wen Gong
2019-08-28 4:28 ` Wen Gong
2019-08-28 5:09 ` Nicolas Boichat
2019-08-28 5:09 ` Nicolas Boichat
2019-08-30 2:48 ` Wen Gong
2019-08-30 2:48 ` Wen Gong
2019-08-27 11:01 ` [PATCH v2 2/7] ath10k: change max RX bundle size from 8 to 32 " Wen Gong
2019-08-27 11:01 ` Wen Gong
2019-08-28 4:28 ` Wen Gong
2019-08-28 4:28 ` Wen Gong
2019-08-28 5:13 ` Nicolas Boichat
2019-08-28 5:13 ` Nicolas Boichat
2019-08-30 2:48 ` Wen Gong
2019-08-30 2:48 ` Wen Gong
2019-08-27 11:01 ` [PATCH v2 3/7] ath10k: add workqueue for RX path of sdio Wen Gong
2019-08-27 11:01 ` Wen Gong
2019-08-28 5:16 ` Nicolas Boichat
2019-08-28 5:16 ` Nicolas Boichat
2019-08-30 2:49 ` Wen Gong
2019-08-30 2:49 ` Wen Gong
2019-08-27 11:01 ` [PATCH v2 4/7] ath10k: disable TX complete indication of htt for sdio Wen Gong
2019-08-27 11:01 ` Wen Gong
2019-08-28 4:29 ` Wen Gong
2019-08-28 4:29 ` Wen Gong
2019-08-28 5:27 ` Nicolas Boichat
2019-08-28 5:27 ` Nicolas Boichat
2019-08-28 12:59 ` Wen Gong
2019-08-28 12:59 ` Wen Gong
2019-08-30 2:50 ` Wen Gong
2019-08-30 2:50 ` Wen Gong
2019-08-27 11:01 ` [PATCH v2 5/7] ath10k: add htt TX bundle " Wen Gong
2019-08-27 11:01 ` Wen Gong
2019-08-28 5:36 ` Nicolas Boichat
2019-08-28 5:36 ` Nicolas Boichat
2019-08-28 13:03 ` Wen Gong
2019-08-28 13:03 ` Wen Gong
2019-08-30 2:51 ` Wen Gong
2019-08-30 2:51 ` Wen Gong
2019-08-27 11:01 ` [PATCH v2 6/7] ath10k: enable alt data of TX path " Wen Gong
2019-08-27 11:01 ` Wen Gong
2019-08-28 5:38 ` Nicolas Boichat
2019-08-28 5:38 ` Nicolas Boichat
2019-08-30 2:52 ` Wen Gong
2019-08-30 2:52 ` Wen Gong
2019-08-27 11:01 ` [PATCH v2 7/7] ath10k: enable napi on RX " Wen Gong
2019-08-27 11:01 ` Wen Gong
2019-08-28 5:39 ` Nicolas Boichat [this message]
2019-08-28 5:39 ` Nicolas Boichat
2019-08-30 2:52 ` Wen Gong
2019-08-30 2:52 ` Wen Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CANMq1KCQZCOw8kHn2MJfAT9fWoLCmz2jFWqHzd=9QOgZ7MeaXQ@mail.gmail.com' \
--to=drinkcat@chromium.org \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=wgong@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.