All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alan Tull <atull@kernel.org>
To: Frank Rowand <frowand.list@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Pantelis Antoniou <pantelis.antoniou@konsulko.com>,
	Michael Ellerman <mpe@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Moritz Fischer <mdf@kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	linux-fpga@vger.kernel.org
Subject: Re: [PATCH v5 00/18] of: overlay: validation checks, subsequent fixes
Date: Mon, 22 Oct 2018 16:24:23 -0500	[thread overview]
Message-ID: <CANk1AXSLZLn6XjC=nv3+pK_NQc_VL5MxWfOW9mLCgv_eFYvPPw@mail.gmail.com> (raw)
In-Reply-To: <1539902796-8382-1-git-send-email-frowand.list@gmail.com>

On Thu, Oct 18, 2018 at 5:48 PM <frowand.list@gmail.com> wrote:
>
> From: Frank Rowand <frank.rowand@sony.com>
>
> Add checks to (1) overlay apply process and (2) memory freeing
> triggered by overlay release.  The checks are intended to detect
> possible memory leaks and invalid overlays.

I've tested v5, nothing new to report.

Alan

>
> The checks revealed bugs in existing code.  Fixed the bugs.
>
> While fixing bugs, noted other issues, which are fixed in
> separate patches.
>
> *****  Powerpc folks: I was not able to test the patches that
> *****  directly impact Powerpc systems that use dynamic
> *****  devicetree.  Please review that code carefully and
> *****  test.  The specific patches are: 03/16, 04/16, 07/16
>
> FPGA folks:
>
>   I made the validation checks that should result in an
>   invalid live devicetree report "ERROR" and cause the overlay apply
>   to fail.
>
>   I made the memory leak validation tests report "WARNING" and allow
>   the overlay apply to complete successfully.  Please let me know
>   if you encounter the warnings.  There are at least two paths
>   forward to deal with the cases that trigger the warning: (1) change
>   the warning to an error and fail the overlay apply, or (2) find a
>   way to detect the potential memory leaks and free the memory
>   appropriately.
>
> ALL people:
>
>   The validations do _not_ address another major concern I have with
>   releasing overlays, which is use after free errors.
>
> Changes since v4:
>   - 01/18: make error message format consistent, error first, path last
>   - 09/18: create of_prop_val_eq() and change open code to use it
>   - 09/18: remove extra blank lines
>
> Changes since v3:
>   - 01/18: Add expected value of refcount for destroy cset entry error.  Also
>     explain the cause of the error.
>
>   - 09/18: for errors of an overlay changing the value of #size-cells or
>     #address-cells, return -EINVAL so that overlay apply will fail
>   - 09/18: for errors of an overlay changing the value of #size-cells or
>     #address-cells, make the message more direct.
>     Old message:
>       OF: overlay: ERROR: overlay and/or live tree #size-cells invalid in node /soc/base_fpga_region
>     New message:
>       OF: overlay: ERROR: changing value of /soc/base_fpga_region/#size-cells not allowed
>
>   - 13/18: Update patch comment header to state that this patch modifies the
>     previous patch to not return immediately on fragment error and
>     explain this is not a performance issue.
>   - 13/18: remove redundant "overlay" from two error messages.  "OF: overlay:"
>     is already present in pr_fmt()
>
> Changes since v2:
>
>   - 13/18: Use continue to reduce indentation in find_dup_cset_node_entry()
>     and find_dup_cset_prop()
>
> Changes since v1:
>
>   - move patch 16/16 to 17/18
>   - move patch 15/16 to 18/18
>   - new patch 15/18
>   - new patch 16/18
>
>   - 05/18: add_changeset_node() header comment: incorrect comment for @target
>
>   - 18/18: add same fix for of_parse_phandle_with_args()
>   - 18/18: add same fix for of_parse_phandle_with_args_map()
>
>
> *** BLURB HERE ***
>
> Frank Rowand (18):
>   of: overlay: add tests to validate kfrees from overlay removal
>   of: overlay: add missing of_node_put() after add new node to changeset
>   of: overlay: add missing of_node_get() in __of_attach_node_sysfs
>   powerpc/pseries: add of_node_put() in dlpar_detach_node()
>   of: overlay: use prop add changeset entry for property in new nodes
>   of: overlay: do not duplicate properties from overlay for new nodes
>   of: dynamic: change type of of_{at,de}tach_node() to void
>   of: overlay: reorder fields in struct fragment
>   of: overlay: validate overlay properties #address-cells and
>     #size-cells
>   of: overlay: make all pr_debug() and pr_err() messages unique
>   of: overlay: test case of two fragments adding same node
>   of: overlay: check prevents multiple fragments add or delete same node
>   of: overlay: check prevents multiple fragments touching same property
>   of: unittest: remove unused of_unittest_apply_overlay() argument
>   of: overlay: set node fields from properties when add new overlay node
>   of: unittest: allow base devicetree to have symbol metadata
>   of: unittest: find overlays[] entry by name instead of index
>   of: unittest: initialize args before calling of_*parse_*()
>
>  arch/powerpc/platforms/pseries/dlpar.c             |  15 +-
>  arch/powerpc/platforms/pseries/reconfig.c          |   6 +-
>  drivers/of/dynamic.c                               |  68 +++--
>  drivers/of/kobj.c                                  |   4 +-
>  drivers/of/overlay.c                               | 292 ++++++++++++++++-----
>  drivers/of/unittest-data/Makefile                  |   2 +
>  .../of/unittest-data/overlay_bad_add_dup_node.dts  |  28 ++
>  .../of/unittest-data/overlay_bad_add_dup_prop.dts  |  24 ++
>  drivers/of/unittest-data/overlay_base.dts          |   1 +
>  drivers/of/unittest.c                              |  96 +++++--
>  include/linux/of.h                                 |  25 +-
>  11 files changed, 439 insertions(+), 122 deletions(-)
>  create mode 100644 drivers/of/unittest-data/overlay_bad_add_dup_node.dts
>  create mode 100644 drivers/of/unittest-data/overlay_bad_add_dup_prop.dts
>
> --
> Frank Rowand <frank.rowand@sony.com>
>

WARNING: multiple messages have this Message-ID (diff)
From: Alan Tull <atull@kernel.org>
To: Frank Rowand <frowand.list@gmail.com>
Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	linux-fpga@vger.kernel.org,
	Pantelis Antoniou <pantelis.antoniou@konsulko.com>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>, Moritz Fischer <mdf@kernel.org>,
	Paul Mackerras <paulus@samba.org>,
	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Subject: Re: [PATCH v5 00/18] of: overlay: validation checks, subsequent fixes
Date: Mon, 22 Oct 2018 16:24:23 -0500	[thread overview]
Message-ID: <CANk1AXSLZLn6XjC=nv3+pK_NQc_VL5MxWfOW9mLCgv_eFYvPPw@mail.gmail.com> (raw)
In-Reply-To: <1539902796-8382-1-git-send-email-frowand.list@gmail.com>

On Thu, Oct 18, 2018 at 5:48 PM <frowand.list@gmail.com> wrote:
>
> From: Frank Rowand <frank.rowand@sony.com>
>
> Add checks to (1) overlay apply process and (2) memory freeing
> triggered by overlay release.  The checks are intended to detect
> possible memory leaks and invalid overlays.

I've tested v5, nothing new to report.

Alan

>
> The checks revealed bugs in existing code.  Fixed the bugs.
>
> While fixing bugs, noted other issues, which are fixed in
> separate patches.
>
> *****  Powerpc folks: I was not able to test the patches that
> *****  directly impact Powerpc systems that use dynamic
> *****  devicetree.  Please review that code carefully and
> *****  test.  The specific patches are: 03/16, 04/16, 07/16
>
> FPGA folks:
>
>   I made the validation checks that should result in an
>   invalid live devicetree report "ERROR" and cause the overlay apply
>   to fail.
>
>   I made the memory leak validation tests report "WARNING" and allow
>   the overlay apply to complete successfully.  Please let me know
>   if you encounter the warnings.  There are at least two paths
>   forward to deal with the cases that trigger the warning: (1) change
>   the warning to an error and fail the overlay apply, or (2) find a
>   way to detect the potential memory leaks and free the memory
>   appropriately.
>
> ALL people:
>
>   The validations do _not_ address another major concern I have with
>   releasing overlays, which is use after free errors.
>
> Changes since v4:
>   - 01/18: make error message format consistent, error first, path last
>   - 09/18: create of_prop_val_eq() and change open code to use it
>   - 09/18: remove extra blank lines
>
> Changes since v3:
>   - 01/18: Add expected value of refcount for destroy cset entry error.  Also
>     explain the cause of the error.
>
>   - 09/18: for errors of an overlay changing the value of #size-cells or
>     #address-cells, return -EINVAL so that overlay apply will fail
>   - 09/18: for errors of an overlay changing the value of #size-cells or
>     #address-cells, make the message more direct.
>     Old message:
>       OF: overlay: ERROR: overlay and/or live tree #size-cells invalid in node /soc/base_fpga_region
>     New message:
>       OF: overlay: ERROR: changing value of /soc/base_fpga_region/#size-cells not allowed
>
>   - 13/18: Update patch comment header to state that this patch modifies the
>     previous patch to not return immediately on fragment error and
>     explain this is not a performance issue.
>   - 13/18: remove redundant "overlay" from two error messages.  "OF: overlay:"
>     is already present in pr_fmt()
>
> Changes since v2:
>
>   - 13/18: Use continue to reduce indentation in find_dup_cset_node_entry()
>     and find_dup_cset_prop()
>
> Changes since v1:
>
>   - move patch 16/16 to 17/18
>   - move patch 15/16 to 18/18
>   - new patch 15/18
>   - new patch 16/18
>
>   - 05/18: add_changeset_node() header comment: incorrect comment for @target
>
>   - 18/18: add same fix for of_parse_phandle_with_args()
>   - 18/18: add same fix for of_parse_phandle_with_args_map()
>
>
> *** BLURB HERE ***
>
> Frank Rowand (18):
>   of: overlay: add tests to validate kfrees from overlay removal
>   of: overlay: add missing of_node_put() after add new node to changeset
>   of: overlay: add missing of_node_get() in __of_attach_node_sysfs
>   powerpc/pseries: add of_node_put() in dlpar_detach_node()
>   of: overlay: use prop add changeset entry for property in new nodes
>   of: overlay: do not duplicate properties from overlay for new nodes
>   of: dynamic: change type of of_{at,de}tach_node() to void
>   of: overlay: reorder fields in struct fragment
>   of: overlay: validate overlay properties #address-cells and
>     #size-cells
>   of: overlay: make all pr_debug() and pr_err() messages unique
>   of: overlay: test case of two fragments adding same node
>   of: overlay: check prevents multiple fragments add or delete same node
>   of: overlay: check prevents multiple fragments touching same property
>   of: unittest: remove unused of_unittest_apply_overlay() argument
>   of: overlay: set node fields from properties when add new overlay node
>   of: unittest: allow base devicetree to have symbol metadata
>   of: unittest: find overlays[] entry by name instead of index
>   of: unittest: initialize args before calling of_*parse_*()
>
>  arch/powerpc/platforms/pseries/dlpar.c             |  15 +-
>  arch/powerpc/platforms/pseries/reconfig.c          |   6 +-
>  drivers/of/dynamic.c                               |  68 +++--
>  drivers/of/kobj.c                                  |   4 +-
>  drivers/of/overlay.c                               | 292 ++++++++++++++++-----
>  drivers/of/unittest-data/Makefile                  |   2 +
>  .../of/unittest-data/overlay_bad_add_dup_node.dts  |  28 ++
>  .../of/unittest-data/overlay_bad_add_dup_prop.dts  |  24 ++
>  drivers/of/unittest-data/overlay_base.dts          |   1 +
>  drivers/of/unittest.c                              |  96 +++++--
>  include/linux/of.h                                 |  25 +-
>  11 files changed, 439 insertions(+), 122 deletions(-)
>  create mode 100644 drivers/of/unittest-data/overlay_bad_add_dup_node.dts
>  create mode 100644 drivers/of/unittest-data/overlay_bad_add_dup_prop.dts
>
> --
> Frank Rowand <frank.rowand@sony.com>
>

  parent reply	other threads:[~2018-10-22 21:25 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-18 22:46 [PATCH v5 00/18] of: overlay: validation checks, subsequent fixes frowand.list
2018-10-18 22:46 ` frowand.list
2018-10-18 22:46 ` [PATCH v5 01/18] of: overlay: add tests to validate kfrees from overlay removal frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 02/18] of: overlay: add missing of_node_put() after add new node to changeset frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 03/18] of: overlay: add missing of_node_get() in __of_attach_node_sysfs frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 04/18] powerpc/pseries: add of_node_put() in dlpar_detach_node() frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 05/18] of: overlay: use prop add changeset entry for property in new nodes frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 06/18] of: overlay: do not duplicate properties from overlay for " frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 07/18] of: dynamic: change type of of_{at,de}tach_node() to void frowand.list
2018-10-18 22:46   ` [PATCH v5 07/18] of: dynamic: change type of of_{at, de}tach_node() " frowand.list
2018-10-18 22:46 ` [PATCH v5 08/18] of: overlay: reorder fields in struct fragment frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 09/18] of: overlay: validate overlay properties #address-cells and #size-cells frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 10/18] of: overlay: make all pr_debug() and pr_err() messages unique frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 11/18] of: overlay: test case of two fragments adding same node frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 12/18] of: overlay: check prevents multiple fragments add or delete " frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 13/18] of: overlay: check prevents multiple fragments touching same property frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 14/18] of: unittest: remove unused of_unittest_apply_overlay() argument frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 15/18] of: overlay: set node fields from properties when add new overlay node frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 16/18] of: unittest: allow base devicetree to have symbol metadata frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 17/18] of: unittest: find overlays[] entry by name instead of index frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-18 22:46 ` [PATCH v5 18/18] of: unittest: initialize args before calling of_*parse_*() frowand.list
2018-10-18 22:46   ` frowand.list
2018-10-19  5:00 ` [PATCH v5 00/18] of: overlay: validation checks, subsequent fixes Frank Rowand
2018-10-19  5:00   ` Frank Rowand
2018-10-22 21:24 ` Alan Tull [this message]
2018-10-22 21:24   ` Alan Tull
2018-10-22 21:24   ` Alan Tull
2018-10-24 19:57   ` Rob Herring
2018-10-24 19:57     ` Rob Herring
2018-10-25 15:25     ` Alan Tull
2018-10-25 15:25       ` Alan Tull
2018-10-25 15:25       ` Alan Tull

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CANk1AXSLZLn6XjC=nv3+pK_NQc_VL5MxWfOW9mLCgv_eFYvPPw@mail.gmail.com' \
    --to=atull@kernel.org \
    --cc=benh@kernel.crashing.org \
    --cc=devicetree@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=linux-fpga@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mdf@kernel.org \
    --cc=mpe@ellerman.id.au \
    --cc=pantelis.antoniou@konsulko.com \
    --cc=paulus@samba.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.